Plate Shear - Mechanical

SCHROEDER MHSUV 3200/3.0

Condition: new, table diameter 315 mm 50 Kg 25 Kg Pedoi Hg I Dopfx Adnsrd chucking diameter 200 mm turning speeds 0 - 5 stufenlos swivelling range 90 Grad tilt adjustment: manually/mechanicall manuell connected load frequency 230 V weight of the machine ca. 45 Kg dimensions of the machine ca. 800 x 600 x 600 m welding turntable with - With integrated tripod and universal welding torch holder - Quick chuck 200mm - foot switch - tilting/pivoting by hand - Speed continuously adjustable

Condition: excellent (used), Four-jaw chuck make Roto Record type DHK 315 x 4 short taper size 8 taper diameter 139,735 bolt circle diameter 171,4 mm diameter 315 mm Jaws individually adjustable Prodpfxjg Rxh Io Adnjd

Condition: used, Year of construction: 1970, x-travel:900 mm y-travel:250 mm z-travel:370 mm table surface area:1525 x 325 mm Predpjcxxqrofx Adnod total power requirement:9,85 kW weight of the machine ca.:3.1 t dimensions of the machine ca.:2,0 x 2,5 x 1,7 m

Condition: used, Year of construction: 2002, Bending machine RAS 73.30 Flexibend – Good condition, with segmental tools For sale is a good condition bending machine RAS 73.30 Flexibend, manufactured in 2002. Equipped with segmental tools, which are attached to the upper bending beam with a quick coupling. The machine is connected, it can be tested on site. Specification: Manufacturer: RAS Model: 73.30 Flexibend Year of manufacture: 2002 Predswmk Ewjpfx Adnjd Working length: 3200 mm Max. bending thickness: 3.0 mm Upper beam opening height: 300 mm Motor power: 4.5 kW Dimensions (L × W × H): 4300 × 2300 × 1750 mm Weight: ~4.4 t Equipment and functions: Control system: FlexiBend 6000 with touch screen – Recently updated by the manufacturer, with a new monitor CNC controlled backgauge: 10–1500 mm Automatic bending beam adjustment Adjustable bending speed Crowning compensation system (Crowning system) Two control pedals Tool storage trolley Tools: Segmented upper tools, height – 150 mm Segmented bending beam tools: – 20 mm (for sheets up to 2.5 mm thick) – 12 mm (for sheets up to 1.5 mm thickness) If you have any additional questions – please contact us, we will be happy to answer.

Condition: good (used), Year of construction: 1998, machine/vehicle number: A 1040, Offer 23342 Hydr. welding turntable and tilting table - three axes - welding manipulator Technical data: - max. load capacity 750 kg - Flat plate diameter 700 mm - min. Table height in horizontal position approx. 720 mm - Average table height in horizontal position approx. 920 mm - Max. table height in horizontal position approx. 1060 mm - Working height manually adjustable in 3 steps Predporaiu Djfx Adned - Faceplate mot.rotatable + swivel or tiltable - Rotation electr. infinitely variable approx. 0.01 - 2.0 rpm - Right + left rotation - Welding current transmission approx. 700 A - Drive 400 V - Connected load 1.5 kW - Manual remote control for direction of rotation, swivel or tilt - Space requirement approx. W 1100 x H 750 x D 700 mm - Weight approx. 500 kg

Condition: used, 5tSWF Krantechnik GmbH Prjdpfx Adedc A R Tened

Condition: new, saw blade diameter 350 mm capacity 90 degrees: round 115 mm Prjdpfxjfg Rlce Adnjd capacity 90 degrees: square 95 mm 180 x 95 mm Working height 925 mm saw blade turning speeds 15 - 90 U/min total power requirement 3,0 kW weight of the machine ca. 0,68 t dimensions of the machine ca. 0,8 x 1,0 x 1,85 m Electro-pneumatic, vertical, linear-guided automatic saw for use of HSS saw blades to make series cuts from 60° left to 45° right steel. The machine also works in semi-automatic cycle. CNC machine with multiprocessor and two with MEP control, latest generation controlled axes that make it possible to achieve 1000 with the same material thickness different cutting programs, each with a different cutting length and number of pieces program.

Year of construction: 2024, condition: new, Make: DURMA Prodpfod R Er Dsx Adnsd Type: MS 2504 year of manufacture: 2022 cutting length: 2550 mm sheet thickness: 4 mm Control: EZM9910 Operating hours: 0 Cutting angle: 1°30 Strokes per min.: 42 motor power: 7,5 kW backgauge range: 750 mm table width: 450 mm table height: 800 mm dimensions L/W/H: 3200x2300x1350 mm Weight: 3780 kg Standard equipment control unit EZM9910 backgauge range 750 mm programmable via control unit Jvcmke Plastic inserts for hold-down 1 side stop and 2 sheet support arms Finger guard Portable foot switch with emergency stop Spring loaded stop in T-slot of the support arms Ball screw Ikh7877 Table plates with ball rollers Upper knife with 2 cutting edges Lower knife with 4 cutting edges CE marking Extended equipment Adjustable angular fence 0-180 The machine can be inspected and demonstrated at any time by appointment in our demonstration center in Staufenberg. Further machines are ready for demonstration at our facility in Staufenberg. We will be happy to provide you with further information on request.

Year of construction: 1972, condition: used, machine/vehicle number: 51512/72, pression: 75 t throat: 300 mm table size: 620 x 800 mm clearance hole in the die: 225 x 325 mm table adjustment: 175 mm Pjdpfsb Tdquox Adnjrd tappet area: 180 x 475 mm tappet adjustment: 80 mm stroke adjustment: 16 - 140 mm number of strokes: 90 /min engine: 380 V, 3 kW space needed: 1700 x 1200 x 2500 mm weight: 3,3 t

Condition: ready for operation (used), Year of construction: 2005, sheet width 3220 mm plate thickness 2.0 mm ST Psdpfjxnqwtex Adnjrd thickness at "Niro-steel" 1.0 mm upper clamping bar adjustment 160 mm adjustment speed 100 mm/sec Adjustment folding beam 80.0 mm bending speed 120 Grad/sec back stop - adjustable ~ 10.0 - 2.000 mm adjustment speed 300 mm/sec compressed air 6.0 bar work height max. 869 mm control POS 2000 total power requirement 10.4 kW voltage 400 V weight 3750 kg range L-W-H 4565 x 2950 x 2163 mm current new price ~ €150,000 from a maintenance workshop with very good equipment (!!) Features: - CNC electro-motor-driven universal folding machine * ??High-precision mechanics with modern control technology * For single and series production * Robust high-speed machine with high axis speeds * Torsion-free welded construction - Rotating upper beam / as an automatic tool change system * With 2 tool stations (sharp and goat's foot bending rails) * Reduces setup and idle times * Eliminates time-consuming tool changes and adjustments - SCHRÖDER CNC control model "POS 2000" * Touch panel at the front right (can also be operated with a PC mouse) * Color display * USB interface * Automatic cutting calculation * Material and tool library * Accurate bending simulation * Windows XP operating system - Servo-driven control Drives * for bending/upper beam and electric backgauge - CNC electric lower beam adjustment - CNC electric backgauge * Travel speed 300 mm/sec. * With rear sheet support surface (stainless steel sheets) - 1x freely movable double foot switch - Operating instructions (PDF) Special accessories included: - 1x 30° upper tool sharpening rail - 1x split set of upper tool goat's foot rails, H = 130 mm - 1x 10.0 mm bending rail - 1x 25.0 mm bending rail