Sandblasting unit

Schlick MB 2-4,1/7,5

Condition: new, Year of construction: 2026, The ERBA Turbo 60 is a centrifugal finishing machine designed for deburring, smoothing, and polishing small to medium-sized workpieces. The machine features a digital process timer, a digital speed display, and a dosing pump (wet configuration). The turntable speed can be adjusted via a frequency converter. The Turbo 60 is available in both dry and wet configurations and can be ideally linked with the ERBA YE-60 separation unit shown in the images. Technical data: - Gross volume: 60 liters - Drive power: 3.0 kW - Turntable speed: 75 to 300 rpm - Optional equipment: tilting motor, soundproof cover, or separation box All prices are net, plus the currently applicable statutory VAT and shipping costs. The images may depict the machine with optional accessories, which are available separately and subject to additional charges. If you are interested, we look forward to hearing from you. We are happy to advise you without obligation. The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). Nkodpfen Ut Ilsx Ad Net This listing serves solely as an online presentation of our goods. Contract negotiations take place via telecommunications (email, telephone, messaging portal). As an initial step, we will send you a non-binding offer, which will also provide details of our general terms and conditions with legal notice and your right of withdrawal before a purchase/contract is concluded.

Condition: good (used), Tumble rubber belt blast machine Max. batch volume: 800 L Max. batch weight: 2000 kg Max. component weight: 150 kg Compartment diameter: 1350 mm Nedpolf Hq Njfx Ad Nokt Compartment width: 1350 mm Nr. Of turbines: 2 Power of turbine: 11 kW Max. turbine flow: kg/min Cleaner type: air Foundation: no Housing protection: Mn Req. air flow: yes Total width of machine: mm Total height of machine: mm Total length of machine: mm

Year of construction: 2006, condition: used, Ultrasonic and electrolyte cleaning, wire cleaning line, wire cleaning plant, wire treatment plant Manufacturer: Sirio-Wire Type: M0209 Number of wires / cores: 12 (6+6) Wire thickness: 1,0 - 5,5 mm; but also stronger wires were run over the line and the achieved cleaning result was very satisfying. Year of construction: 2006 The plant was only in operation for about three years, then the production was moved to another location. Nedef Nku Rjpfx Ad Nekt Process: Ultrasonic and electolytic cleaning in a hot bath. On the manufacturer's website siriowire you will find a detailed description of the process under "Ultrasonic and Electolytic Cleaning". The unit is in good working condition and is complete except for the pumps. On the photos the catwalk for the operator and the collecting basin in which the plant stands are missing, these photos are still supplemented. On the last three photos you can see plants of this design in operation.

Condition: used, Year of construction: 1998, charge load 620 liter Outer dia. of work tank 1695 mm tank length (expanded) 3800 mm width of working tank 430 mm speeds 900 - 1485 U/min voltage 400 V total connected load 7,5 kW weight of the machine ca. 1600 kg dimensions of the machine ca. 1,80 x 1,70 x 1,30 m - Serial No.: 18585/98-03 Nkodew Hnr Iopfx Ad Nst - with continously variable motor speed - with pneumatic separation flap

Condition: ready for operation (used), Year of construction: 2005, operating hours: 52,455 h, functionality: fully functional, machine/vehicle number: 2501-0154, turning length: 600 mm, turning diameter over cross slide: 140 mm, turning diameter: 300 mm, spindle motor power: 25,000 W, spindle speed (min.): 5,000 rpm, spindle speed (max.): 5,000 rpm, travel distance Z-axis: 900 mm, rapid traverse X-axis: 3 m/min, rapid traverse Y-axis: 3 m/min, rapid traverse Z-axis: 3 m/min, rotational speed (max.): 4,000 rpm, rotational speed (min.): 4,000 rpm, torque: 239 Nm, bar passage: 80 mm, feed rate X-axis: 165 m/min, feed rate Y-axis: 165 m/min, feed rate Z-axis: 220 m/min, overall weight: 10,500 kg, Equipment: documentation/manual, Machine is still in use and can be seen working at VOVU Machining in Uden. In total there are 6 identical machines here. Nksdpfxour Hfzs Ad Njt Fanuc 310is controller

Condition: good (used), Year of construction: 2011, machine/vehicle number: MS 1153, Offer 23158 Technical data ca : - passage to blasting chamber B 370 x 170 mm - blasting nozzle Nkedpfx Adsllvr Dj Net - Door opening to blasting chamber - Blasting material pressure vessel - blasting material recovery - separate control panel - space requirement blast machine 1600 x 2000 x H 1750 mm - space requirement blasting material container 1200 x 1200 x H 2250 mm - Cartridge filter with suction fan MUNK - SCHMITZ - Air volume 700 - 1500 m³/h - Suction fan 3 kW - space requirement filter unit 1600 x 1600 x H 3250 mm - mot. driven inlet roller table 4 m - roller table without drive 3 m - roller width approx. 800 mm - roller table height approx. 700 mm

Condition: used, slot-milling length 300 mm groove width 34 mm flute depth mm cutting speed 6 m/min return speed 6 mm/min clamping plate 380 x 300 mm weight of the machine ca. 285 kg Nsdpfx Adod Ih Uij Nskt dimensions of the machine ca. 590 x 1150 mm Bore-Ø min.: - with spezial knifes: 6 mm - with ram inserts: 20 mm - with normal bumper: 40 mm Electromagnetic Brake with various accesssories (see pictures)

Condition: reconditioned (used), Year of construction: 1992, functionality: fully functional, center height: 150 mm, grinding length: 620 mm, center width: 680 mm, grinding wheel diameter: 350 mm, total width: 500 mm, Condition of the machine: Nkedpfxsrz Nflo Ad Net The machine is currently in a used, non-overhauled condition. The following work carried out on the machine: - Complete disassembly of the entire machine except for the guides - Replacement of all sealing and wear parts of the entire machine - Replacement of the infeed spindle of the X-axis - Replacement of the main bearing of the workpiece spindle - Replacement of grinding spindle - All machine assemblies are restored to as-new condition Geometry: - Scraping of the X-axis guide - Scraping the Z-axis guide - Grinding the X-axis table - Grinding the Z-axis table - Grinding the upper tables - Grinding of the assembly housing (workpiece headstock, grinding headstock and tailstock) - Creation of measurement report for TSCHUDIN cylindrical grinding machine Painting: The main assemblies are repainted, the rest of the machine retains the original paintwork Electronics: The complete electronics of the machine are checked, tested and defective switches and cables are replaced

Condition: used, HIGH SPEED DOWEL CROSS-CUT AND CHAMFERING MACHINE LOSER MOD. AA220 Njdpeqpdkcofx Ad Nokt - Range of working diameter: 6 - 18 mm - Capacity: about 7,500 - 15,000 dowels/hour

Condition: used, Year of construction: 2010, 2 Number of axles 4 St. tool taper HSK 63 toll turrets 60 Nkodeqn A Rkopfx Ad Net weight 9600 kg