Spot welder

Schlatter

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, working range: X-axis: 2.000 mm Y-axis: 1.200 mm Z-axis: 190 mm welding power: 20 kA Fedpfx Aasy Er Uqjljpg welding force: 2 x 5 kN

Condition: new, Year of construction: 2024, functionality: fully functional, Incorrect investment by a corporation. Machine is new and unused (already delivered). The machine is available immediately with no lead time. An extremely rare opportunity. Machine type: Horizontal machining center with pallet changer Model series: NHX 8000 Control: Siemens S840Dsl with CELOS Measuring system: fully closed loop scale feedback (X/Y/Z) Machine concept: DCG Travel paths X/Y/Z: 1,400 / 1,200 / 1,350 mm Rapid traverse X/Y/Z: 50,000 mm/min Pallet system: Turn-type pallet changer Number of pallets: 2 Pallet size: 800 × 800 mm Pallet load: 2,200 kg [optional 3,000 kg] Fjdpfx Aexizdajalspg Max. workpiece Ø/H: 1,450 mm / 1,450 mm Pallet change time: 16 s B-axis: direct drive Minimum index: 0.001° Maximum speed: 100 rpm Spindle: powerMASTER Speed: 16,000 rpm Power: 85/50 kW (10% duty cycle / continuous) Torque: 549/279 Nm Taper: HSK-A100 Cooling: central spindle cooling Internal coolant: optional CTS 7 MPa Tool magazine: chain-type, 60 positions [optional 100/120] Rack magazine options: 180 / 240 / 330 positions Max. tool diameter with adjacent tools: 110 mm Max. tool diameter without adjacent tools: 320 mm [for >10,000 rpm: 230 mm] Max. tool length: 800 mm Max. tool weight: 30 kg Tool-to-tool: 1.9 s Cut-to-cut: 5.0 s Equipment / Options: - Workpiece probe - Tool measurement - Laser control (optional) - High-pressure coolant 7 MPa (optional) - Chip conveyor - Fully enclosed enclosure with roof Dimensions n.a. Weight n.a. Connection data n.a.

Condition: excellent (used), Year of construction: 2003, working width: 215 mm, welding power (max.): 750 kVA, Complete Mesh welding/Lattice girder factory Factory consists : - Mesh welding line SCHLATTER PG 24 , Semi- automatic , Year - 2002 - Lattice Girder Line SMEI , Full automatic , Year - 2003 - Straightening and cutting machines 1x Wafios R4 2 x VITARI NR16 1X VITARI NR10 - Cold drawing line SMEI , Input wire max.10mm, Speed - 4m/sec. Fpsdpfx Aeqy Ek Ajaleg - But welding achine SMEI - Wire sharpener SMEI

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, working width: 2,440 mm, welding power (max.): 1,200 kVA, wire diameter (max.): 12 mm, type of input current: AC, wire diameter (min.): 4 mm, Refurbished Schlatter MG903 - PG24 - Longitudinal wire inserter LFE - Longitudinal wire feeder LV - MG24.4 mesh welding machine - Cross wire feeder QF8 - Mesh output MVL4.2 - Mesh stacker MS12 - Control and power cabinet - Siemens S7 TIA machine control Fpjdpfx Aoy D H T Esaljg Mesh width: 2450mm Wire: 4-12mm

Condition: excellent (used), Year of construction: 2013, loading capacity: max. 1.500 Kg. Fodpfx Aovam Iijaljpg wire diameter range: 0,5 - 8,0 mm coil outside diam. max. 1.000 mm coil inside diam. min. 300 Kg. speed: 0 - 80 U/min

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, working width: 1,240 mm, welding power (max.): 420 kVA, wire diameter (max.): 8 mm, type of input current: AC, mesh size: 25 mm, working length: 4,000 mm, wire diameter (min.): 2 mm, Machine Profile: Schlatter MG900 PG12 The Schlatter MG900 is a high-performance, fully refurbished resistance welding line, specifically designed for the production of wire mesh panels. It can process wire diameters of up to 12 mm with a maximum mesh width of 1,250 mm and a length of up to 3,000 mm. The machine has undergone comprehensive modernization to ensure maximum efficiency and flexibility in production. Technical Specifications 1. Main Components: Longitudinal Wire Feeder LV - Upgraded to a high-precision servo axis. - Magazine feeders for wires up to 3,000 mm in length. MG12.4 Mesh Welding Machine - Fitted with 6 transformers. - Four (4) Schlatter welding presses, 5 kN each. - Machine upgraded to 12 welding presses. Cross Wire Feeder QFD34 - Allows double wire insertion for two different line wires. - Note: The second tier is not yet installed in the photos. Mesh Extraction MVL - Driven by MS2N servo motor with CtrlX by Bosch Rexroth. - Equipped with three Schlatter mesh grippers (expandable on request). Mesh Stacking Unit MS - Automatic stacking of mesh panels (travel distance 3,100 mm). Control and Power Cabinet - Siemens S7 TIA machine control system. - Rexroth CtrlX components for high-dynamic motion control. Longitudinal Wire Loader LFE - Not included, available on request. Special Features and Advantages: - Full Refurbishment: Machine has been completely overhauled and modernized, with warranty included. - Efficiency: Fully automated operations via mesh stacker and servo-driven longitudinal wire feeder. - Future-Proof: Equipped with the latest technologies and control components. Specification: - Mesh width (cross wire length): max. 1,250 mm / min. 200 mm - Mesh length, with manual loading: max. 3,200 mm / min. 300 mm - Maximum distance between outermost line wires: 1,200 mm - Longitudinal wire spacing: 25 – 150 mm - Cross wire spacing: min. 12.5 mm, infinitely programmable Fpedpfxsy D Huie Aaljg - Longitudinal wire diameter: 2.0 – 10.0 mm - Cross wire diameter: 2.0 – 8.0 mm - Maximum number of longitudinal wires: 24

Year of construction: 2017, condition: used, functionality: fully functional, machine/vehicle number: 4512 31727.01, Machine for spot-welding wire onto tube. Fpsdpfx Aaeytykhelsg

Year of construction: 2024, condition: new, New mechanical and electromagnetic clutches and brakes for Bulgarian machine tools of the following types: CU400, CU500, CU502, CU580M, CU582, C11MT, C11MB, C11, C13B… We also offer a wide selection of various spare parts for the above-mentioned machine tools, most of which are available from stock, while for the rest we offer the fastest possible delivery times. Fodjv Rpn Tepfx Aalepg We cordially invite you to cooperate!

Condition: good (used), Year of construction: 1976, Spot welding machine, spot welding system, spot welding gun, resistance spot welding machine, lever-action spot welding machine -Stationary -Operation via hand switch -Arm length of welding machine: 350 mm -Welding pliers type: -Steering -Machine dimensions: 1500/1000/H1670 mm -Machine weight: 774 kg -Dimensions of control cabinet: 1550/420/H1960 mm -Weight of control cabinet: 330 kg Fpsdpfec N Uabjx Aaleg

Condition: used, Year of construction: 1970, functionality: fully functional, machine/vehicle number: D34E/8218, Offer Number: D34E/8218 Machinetype: mesh welder Fodpfx Aaowi Thmsljpg Make: SCHLATTER Type: PG8 Constr. year: 1970 wire diameter: 1,5-6,5 mm working width: 850 mm line wire distance: 20-60 mm distance of cross wire: 10-100 mm Location: Europe

Year of construction: 1977, condition: refurbished (used), I sell the double mitre saw Rapid DGS, year 1977. Tilting heads Fjdjd N Rb Depfx Aaljpg Drilling front heads on each side included Very good condition. Available immediately.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, working width: 1,700 mm, welding power (max.): 600 kVA, wire diameter (max.): 6 mm, type of input current: three-phase, MG950 Mesh Width (Cross Wire Length) for lower feed, single-row: 200 – 900 mm for upper feed, single-row: 200 – 1700 mm for upper feed, double-row (usable width): max. 1530 mm Mesh Length: max. 3200 mm min. 350* mm Distance between the outermost longitudinal wires: max. 1600 mm Longitudinal wire pitch: min. 20 mm Cross wire pitch: min. 10 mm steplessly programmable Clear opening longitudinal wire: min. 15 mm Clear opening cross wire: min. 8 mm Longitudinal wire diameter: 2.0 – 6.0 mm Cross wire diameter: for lower feed: 1.5 – 4.0 mm for upper feed: 2.0 – 6.0 mm Longitudinal wire overhang: max. 300 mm, min. 10 mm Cross wire overhang: max. 300 mm, min. 5 mm Fjdpfxsym An Aj Aalepg Number of individual welding groups ESG: 12 Number of portal welding groups PSG18: 12 Max. number of longitudinal wires: 12

Condition: used, Year of construction: 2016, functionality: fully functional, working width: 2,000 mm, wire diameter (max.): 6 mm, type of input current: three-phase, operating speed: 142 mm/s, mesh size: 9,999 mm, continuous power (apparent): 833 kVA, We offer a used Schlatter MG600/MG24.4/10Sp-AC mesh welding machine, model year 2016. Type: MG600/MG24.4/10Sp-AC Serial number: 4885.31609 Year of manufacture: 2016 Rated primary voltage U1N: 400 V Fjdpfeyaqzqjx Aalopg Rated secondary voltage Ua: 230 V Primary phases: 3 ~ Secondary phases: 1 ~ Frequency: 50 Hz Rated apparent power Sp: 833 kVA Rated primary current I1,p: 1202 A Primary short-circuit current I1cp: 50 kA Secondary short-circuit current I’acp: 10 kA If you have any questions or require further information, please feel free to send us a message or call us.

Condition: new, table width 3000 mm table length 1500 mm burner heads 1 Control CNC feed 20.000 mm/min total power requirement 15 kVA dimensions of the machine ca. 4,5 x 2,5 m * Heavy machine bed with precision guides for quiet movement machine * A ball bearing cross carriage for height adjustment with 400mm vertical Hub * Thermal separation of the drive and cutting areas ensures the highest precision * Automatic height finding and torch height control during cutting * Torch holder with collision protection and automatic shutdown in the event of a collision * Installation or implementation of the machine using the plug & play method with a forklift, Ant or crane possible * 3-sided accessibility to cutting area through boom design SATOTEC suction table: The SATOTEC table system is characterized by a stable table construction max. cutting thickness of 150 mm. For cutting a workpiece thickness of 150 mm, oxyfuel cutting technology is required. The workpiece support frame has interchangeable ones placed at a 45° angle and 3 mm thick flat iron slats. The distance between the slats is 50 mm. Power source Kjellberg Q1500: * Precise plasma cutting of all electrically conductive materials from 0.5 to 60 mm both dry and under water * Recommended cutting range from 0.5 to 40 mm * Maximum piercing thickness 30 mm, increase possible with ProPierce Technology * Marking, notching and punching, including coated metallic materials * Inverter power source with digitally controlled, fully electronic process flow * Integrated cooling with partially automated filling and emptying Gas control: Fully automatically controlled, processor-controlled plasma all-gas console Q- Gas for cutting all metals Lantek Expert Cut Inside: CAD/CAM module integrated in the machine control Extraction TEKA EcoCube 5.5 kW Medium to be filtered: dry, fat-free or oil-free dust/smoke Filter area: 100 m² (4 cartridges of 25 m²) Filter cartridge: BIA M, Type Nano Degree of separation: 99% (according to BGIA test certificate) Filter control: automatic filter cleaning, PLC Fan performance: 4500 m³/h Motor power: 5.5 kW Connection voltage: 400V/50 Hz or 480V 60Hz. Current consumption: 11.5 A Current type: 3Ph+N+PE Fan structure: on the system, including silencer duct bend, right side Motor control: frequency converter Noise level: 75dB(A) + max 10 dB(A) with cleaning pulse Intake port: NW 250 mm via intake duct, left side Exhaust: via silencer duct bend Dimensions (W x D): approx. 800 x 800 mm System color: - Fan housing: Light gray - Cartridge housing: RAL 5007 brilliant blue Special equipment: - Locking hooks and toggle locks - Compressed air connection and condensate drain each mounted with one Fodpfx Aopm U U Nsalopg Bulkhead fitting - Compressed air connection with hose nozzle d=8mm - Provide the system with grounding bolts - Cable in UL version - EATON frequency converter on the left in the attached control cabinet

Condition: refurbished (used), SCHLATTER Welded wire mesh production line MG24 Full revamped WORKING RANGE Panel width: max. 2500 mm Weft wire length: min. 900 mm Weft wire length with QF5 dispenser: min. 300 - 1600 mm Spacing between extreme warp wires: max. 2400 mm Mesh length (warp wire length): max. 2500 - 6000 mm Spacing between warp wires: min. 100 mm Spacing between weft wires: 25-250 mm Fedpfewu Tu Dox Aalepg Adjustable by cutting device (0-1) Warp wire diameter: 4.0 - 12.0 mm Weft wire diameter: 4.0 - 12.0 mm Number of warp wires: max. 24 WELDING MESH MACHINE MG 24.1/8C, Basic equipment including: - 1 Machine frame - 1 Upper support for press reception, continuously adjustable by hand crank - 1 Magnet supports with retaining magnets and weft wire monitoring. - 1 Row of pneumatic solenoid valves for press actuation. - 1 Installation for air and water. - 2 Pneumatic rotary drives with oil damping - Static motor torque with 5 bar compressed air: 480 Nm - Front continuously adjustable from: 25 - 250 mm adjustable by cutting device (0-1) - 1 Advance carriage with panel lifting device - 1 Set of tools for machine adjustment WELDING SECTION 8 Type C Transformers Rated power of each transformer: 100 kVA No-load secondary voltage: 7.1 V Rated secondary current: 14 kA 8 Thyristor contactors ES 130 12 Welding presses: 5.0 kN 12 Chain current bridge for spacing of warp wires: 50-100 mm 12 Chain current bridge for spacing of warp wires (for offset warp wires): 100 mm 10 Chain current bridge for spacing of warp wires: 100-150 mm 8 Chain current bridge for spacing of warp wires (for offset warp wires): 150 mm 6 Chain current bridge for spacing of warp wires: 150 - 200 mm 6 Chain current bridge for spacing of warp wires (for offset warp wires): 200 mm 24 Lower electrode holders Cu with standard angled electrodes and each with a water-cooled current cable, width: 58 mm 24 Wire clamping pliers Panel width: max. 2500 mm Weft wire length: min. 900 mm Weft wire length with QF5 dispenser: min. 300 - 1600 mm Spacing between extreme warp wires: max. 2400 mm Mesh length (warp wire length): max. 2500 - 6000 mm Spacing between warp wires: min. 100 mm Spacing between weft wires: 25-250 mm Warp wire diameter: 4.0 - 12.0 mm Weft wire diameter: 4.0 - 12.0 mm Number of warp wires: max. 24