FW 430/430

Schelling

Condition: excellent (used), Motor power 1.2 HP, 400 V, 50 Hz Fgodpfxjvzramj Alqeb Speed 2800 rpm Drilling table size 650 x 330 mm Cross adjustment 300 mm Depth adjustment 150 mm Height adjustment 170 mm Table height 880 mm Weight approx. 280 kg

Condition: excellent (used), functionality: fully functional, Planer thicknesser HA 4 Planing width: 450 mm Total table length: 2500 mm Infeed table: 1500 mm Machine height: 820 mm Max. cutting depth: 15 mm Cutter shaft speed: 4800 rpm Motor power: 4 HP Weight: 660 kg Fgodpeinkfnefx Alqob 3-knife cutter shaft Transport available at extra cost!

Condition: used, machine/vehicle number: 005445, Max. panel width: 3200 mm Max. panel length: 2120 mm Main saw blade projection: 165 mm No of Rip saw Grippers: 4 No of Cross Cut Grippers: 9 Panel Rotation Station: yes Thin sheet loading: yes Fgedpsiiiuyofx Alqob

Condition: used, machine/vehicle number: 006211, Max. panel width: 4300 mm Max. panel length: 2200 mm Main saw blade projection: 135 mm Fgodpfeiwbfuox Alqsb No of Grippers: 10 Second flexible pusher: yes Panel Rotation Station: yes

Condition: used, Year of construction: 1996, Edge thickness: 0.4 - 12 mm Roll edge: 3 x 45 mm or 0.8 - 60 mm Minimum workpiece width: 65 mm Minimum workpiece length: 160 mm Workpiece thickness: 10 - 55 mm Feed rate: 13 m/min Pre-milling (joining) Glue pot Quickmelt Gluing unit Trimming Flush trimming Chamfering Radius trimming Corner rounding Flat scraper Buffing unit Machine dimensions: 7450 x 1220 x 2400 mm Weight: 3000 kg Fodpfxjvvkd Tj Alqogb Storage location: Nattheim

Condition: ready for operation (used), Year of construction: 1998, Brand: Schelling Model: FL430/410 Machine no.: 211.178 Year of manufacture: 1998 Fsdpfx Aloxf Idxeqogb With front and rear feed Technical data Saw length 4200 Pusher 4100 Setup 7×10 m (length×depth) Lifting table 6.5 tonnes

Condition: good (used), Year of construction: 2011, machine/vehicle number: 2212.287, Automatic panelsaw Schelling Typ:FH 6 430 Maskin nr:221.287 År:2011 Panel beam saw Schelling with automatic, rear-feed,lifting table. For sawing board material, chipboard, MDF, Plywood, Board, Laminate etc. Techn info: Fodpfx Alstk It Soqsgb Software MCS Evolution 2.0, SPS, Soft-SPS-Siemens WinAC Operating system WINDOWS XP PC with keyboard and mouse TFT monitor 17" Cutting length 4300mm, automatic detection of the start of the plate Cutting width 4300mm Machine accuracy of the cut length 3m +-0.1mm Positioning accuracy measured at input +-0.1mm Max diameter saw blade 460mm, spindle 30mm Pre-scoring blade 200mm, spindle 20mm motor operation is set from the control console Max panel thickness 120mm Panel stack aligner Main saw blade motor 27kw Saw blade over table 135mm Safety curtain Air cushion table with 3pcs air ball nozzles, radial ventilator fan Table sizes 2650x850mm 620x850mm 2650x2550mm Pressure beam with automatic adjustment of pressure to cut length and package height Package straightener before and after the pressure beam Max package height 120mm (incl. sum of curvature and board thickness tolerance) Pusher with 12 grippers Max clamp opening (gripper) 133mm Min-max force package straightener 400/2000N Speed saw carriage forward 6-150m/min Speed saw carriage back 150m/min Forward feed speed (pusher) up to 25m/min (according to EC Europa EN1870-13) other countries 80m/min Speed feeding back up to 80m/min Push-off device 3 pcs Lift table length x width 4350x2550mm Hydraulic unit Standard version 1600mm lifting height 1.25/2.5m/min raising speed, 1.25/5m/min lowering speed Maximum load 1200 kg/m2 total 9 tons Roller track driven rollers, frequency controlled for stack on lifting table 4100x2600mm Max stack weight 6500 kg Max stack length 1060mm Slots for forklift 4 pcs, distance in the middle 1200mm, slot width 300mm Light curtain for personal protection Roller conveyor driven for package frequency controlled input to lifting table left 5600x2600mm max load 6500kg Roller conveyor driven for packages frequency controlled input to lifting table right 5600x2600mm max load 6500kg Slots for forklift 2 pcs, center distance 900mm, slot width 400mm 2 positioning stops with roller for stack alignment Light curtain (double beam) for personal protection Roller table after saw depth 4300mm, free-running ployamide rollers Angle stop at the rolling table Infeed guide two-lane (beam length 7200mm) 2-sided hardened precision guides rack and pinion drive, two-sided Input carriage (pusher) gear rack servo drive, non-contact measuring system Gripper, (scissor clamps) in pusher 12 pcs Automatic adaptation of the clamping force to the package height (progressive clamping force) can be set to 0 Pusher for panels thickness greater than 6mm,material thinner than 6mm is fed manually Central cleaning system feed trough (pusher) Compressed air 6-8 bar, approx. 1600l/min Power 38 kw, 70 A. 3x400 volts, 50 Hz, operating voltage 24 VDC Dust extraction 4000m/h, air speed 30m/s Diameter connection 80mm (angle connection), 120mm /pressure beam), 150mm (sawdust channel) Total setup area without driven roller conveyors including protective grid approx: 11650x7300mm Driven roller tracks left-right 5500+5500mm Stock no: 2002125BXACEO Subject to incorrect technical data presented

Condition: used, machine/vehicle number: 006279, X axis working area: 3100 mm Y axis working area: 1250 mm Working Table: Flat table Number of controlled axes: 3 axes Total number of drilling spindles: 11 Total number of tool changer positions: 8 Fsdpskw H Ekefx Alqsgb

Condition: excellent (used), Total Space Required (with panel saw) mm 11600 x mm 7500 (ca.) 209011) AUTOMATIC BOARD STORAGE SYSTEM (LOADER) for PANELS - BARBARIC Mod. LCV Max panel size mm 4250 x 2200 Mobile upper bridge (on X-axis, length mm 11400), with mobile carriage (on X-axis) Vacuum suction cup group (mobile on Z-axis) 90° rotating 90° rotation of panels up to 2800 mm in length 209010) PANEL SAW Mod. FH 4 430 Numerical Control MCS Evolution (Software base Windows XP) Rear pushers with No. 7 clamps / grippers Max. cutting width (mm) 4300 Max. blade projection (mm) 105 Max. clamp opening (mm) 105 Scoring Unit (max. diameter saw) mm 200 Main Sawing Unit (max. diameter saw / power) mm 360 / Kw 18 Adjustable speed of the saw carriage (m/min) 5 - 160 No. 4 front supporting tables with Air blowing system Total power (Kw) 35 (ca.) Fsdpfx Alsy Hiymeqegb

Condition: used, machine/vehicle number: 006006, Max. panel width: 2300 mm Max. panel length: 4300 mm Fedsu Rv Uqopfx Alqjgb Main saw blade projection: 135 mm No of Rip saw Grippers: 7 No of Cross Cut Grippers: 20 Second flexible pusher: yes Panel Rotation Station: yes

Condition: new, SCM Olimpic 500 HT - Automatic Edge Banding Machine New machine with warranty. - Olimpic 500 - "HP T-ER2" version - "eye-S" control panel - "Maestro active edge" human-machine interface (HMI) software - Fine milling and radius scraping unit, radius = 1 mm - Fine milling and radius scraping unit, radius = 2 mm - Electronic positioning of the upper pressure beam - Spacer on the infeed guide - "SAVENERGY" kit - Interior lighting of the booth and gluing area - Nesting rollers - Release agent spray unit "AAR" 1 - Sprayer for finishing the edge - Sprayer for delicate edges - "RT-V1" jointing unit - "EASY SIZE" device - "VC-VM" gluing unit - Ceramic lamp with infrared rays - Electronic positioning of the pressure rollers - "K-2 Radius" trimming unit - Chamfering and Radius milling unit "R-HP Multiedge 2R" - Rounding unit "Round 2-A Multiedge 1R" - MULTIEDGE kit with 3 automatic positions straight/R/R, for "Round 2-A" - Radius scraper unit "RAS-HP Multiedge 2R" - Flat scraper "RC-N" Fgsdpfx Alswkf Ihoqjb - Buffing unit "SP-V" Machine is new and still in original packaging. Promotional machine at a special price.

Condition: used, machine/vehicle number: 007504, Position 1: Vertical Storage Systems IMA + SCHELLING-AH 6 Position 2: Angular Beam Panel Saws IMA + SCHELLING-AH 6 Position 3: Panel Feeding and Loading IMA + SCHELLING-AH 6 Fgedpfxjwuucie Alqob

Condition: ready for operation (used), Year of construction: 2012, Panel saw manufactured in 2012. This SCHELLING FH 4 features a nominal cutting length of 4250 mm and a maximum saw blade diameter of 350 mm. It offers a feed speed of up to 80 m/min and is equipped with an ARDIS software package for enhanced functionality. Includes a storage grundner. If you are looking to get high-quality panel cutting capabilities, consider the SCHELLING FH 4 machine we have for sale. Contact us for further details. Panel dimensions • Length: 2000–4100 mm • Width: 300–2100 mm • Thickness: 6–60 mm • Panel thickness tolerance: -0.2 to +0.2 mmMachine specifications • Nominal cutting length (Saw Machine 430): 4250 mm • Main saw blade diameter (max): 350 mm • Scoring saw blade diameter: 300 mm • Max saw blade clearance above table: 95 mm • Max package height: 80 mm • Strip aligner alignment force: 400–2000 N/piece • Max clamp opening: 90 mm • Working height: 970 mm • Overall height: 2070 mmDrives and speeds • Main saw motor power: 15 kW • Saw unit feed speed (forward): 5–120 m/min Fgedpfxeyyw U So Alqsb • Saw unit feed speed (reverse): 120 m/min • Feed speed (forward): up to 80 m/min • Feed speed (reverse): up to 80 m/min Additional equipment • Panel storage system (Manufacturer: Grundner) • Length: 24.90 m • Width: 14.17 m • Stack height: 2 m • Lifting height: 2.10 m • Max panel size (L x W): 4.20 x 2.10 m • Min panel size (L x W): 1.80 x 0.60 m • Max lifting capacity: 250 kg • Horizontal drive power: 2.2 kW • Horizontal travel speed: approx. 120 m/min • Vertical travel speed: approx. 40 m/min • Panel material: suitable for vacuum gripping technology • Connected load: 6 kW • ARDIS software package

Condition: new, Year of construction: 2026, functionality: fully functional, The Nanxing NPC330 is a high-performance beam saw designed for fast and precise cutting of MDF, particleboard, plywood and other wood-based panels. It is the ideal solution for furniture factories seeking high throughput and consistent accuracy. The saw carriage is driven by a 2 kW servo motor with rack and pinion transmission, reaching cutting speeds up to 90 m/min and return speeds up to 120 m/min. The powerful software package includes cutting optimization, work process management, cutting simulation, error display, and automatic label printing for efficient production tracking. Key Features Cutting height: up to 120 mm Cutting width: 3270 mm Automatic pressure beam adjusts to the total height of the panel stack for maximum efficiency Air flotation table ensures scratch-free and easy panel handling 10 pneumatic clamps (optional 12) for secure fixing and precise positioning Fgsdpfjxcwwpex Alqsb Servo side alignment for perfectly perpendicular cuts Full protection system: operator hand protection, piano-type blade cover, optional safety fence & light barrier Quick-change main saw blade and one-click scoring blade adjustment Automatic lubrication system for longer machine life and lower maintenance costs Industrial control cabinet with international brand components, 21.5” touchscreen, PC (i5 CPU, 8 GB RAM) Technical Specifications Max. cutting length: 3270 mm Max. cutting height: 90 mm (optional 120 mm) Main saw motor: 15 kW (optional 18.5 kW), 3910 rpm Scoring saw motor: 4300 rpm Main saw blade: Ø380 mm (shaft Ø60 mm) Scoring saw blade: Ø200 mm (shaft Ø45 mm) Feed speed: 90 m/min (return 120 m/min) Total installed power: 24.2 kW Machine dimensions: 6900 × 5400 × 1820 mm Weight: 4,560 kg Power supply: 380V / 50Hz / 3-phase Air requirement: 0.6 MPa Dust extraction: Ø150 mm × 3, min. speed 28 m/s Benefits for Manufacturers High productivity: package cutting with fast forward and return speed Excellent accuracy: ±0.03 mm thanks to heavy-duty frame and pneumatic clamping Digital optimization: AutoCut software included to minimize waste and optimize cutting plans Maximum safety: full machine guarding, light barrier, and emergency stop Operator-friendly: air flotation table and servo-driven feeding system for effortless panel handling

Condition: excellent (used), For panels measuring 5600 x 2600 (2700 mm), thickness from 2 mm to 60 mm N° 2 double-deck infeed roller conveyors, 1 x 6.000 mm long and 1 x approximately 3.800 mm long Hydraulic lifting table (5600 x 2700 mm ca.) System with rubber wheels (11 top + 11 bottom) for panel pressure/feeding Sliding bridge with 45 suction cups and 5 supports (for panel stack alignment) 1st Rear - Pusher, with 11 clamps Rotating table (90° panel rotation) with plastic wheels 1st Panel Saw AH8 580 - Max cutting width mm 5600 (Max blade projection mm 165) Scoring Unit (max. diameter saw / power) mm 200 ca. (Kw 2,2 ca.) Main Sawing Unit (max. diameter saw / power) mm 520 ( Kw 32) Adjustable speed of the saw carriage (m/min) 0 - 150 Sliding crosspiece with 7 pushers for cut panels With 4 supports (for panel stack alignment) and 3 motorized chains 2° Rear - pusher, with No. 25 (27) clamps/grippers 2nd Panel Saw - Max cutting width mm 2700 (Max blade projection mm 165) Scoring Unit (max. diameter saw / power) mm 200 ca. (Kw 2,2 ca.) Main Sawing Unit (max. diameter saw / power) mm 520 (Kw 32) Fgjdpfxoxvc N De Alqsb Adjustable speed of the saw carriage (m/min) 0 - 150 Waste evacuation system with grinder VECOPLAN (Kw 55) Plastic wheels coated table for cut panel output Stacking system for cut panels with N° 2 front support tables with air blowing system 400 x 6300 mm + N° 8 lifting tables (4 are 1300 x 1600 mm and 4 are 1300 x 1410 mm) - Total power KVA 130