Folding machine

SCHECHTL KS 1

Condition: good (used), Year of construction: 1980, machine/vehicle number: 27-3, Offer 23317 Technical data: - max. working width 2040 mm - max. material thickness at 40 kp / mm² strength 3.5 mm - Bending angle setting electronically preselectable 0 - 135 ° - smallest bending radius 1.25 x sheet thickness - Smallest inner flange height 6 x sheet thickness - Automatic sequence control for a complete work process - Operation via hand or foot switch - largest opening width / stroke of the upper beam 200 mm - Height adjustability - of the bending beam 80 mm - of the lower beam 80 mm - Upper beam drive 400 V / 1.1 kW - Bending beam drive 400 V / 1.5 kW - Manual backgauge can be operated from the front - Space requirement approx. W 3300 x H 1350 x D 1500 mm - Weight approx. 2600 kg Hsdpjrklfrofx Anmefk

Year of construction: 1955, condition: used, Radial drilling machine, drilling machine, boom drilling machine -Outreach: 2055 mm -Max. Distance from machine table to spindle mount: 1700 mm -Cone mount: MK5 -Motor power: 7.5 kW Hsdpjd Enr Ijfx Anmsfk -Speeds: 11.2-1400 rpm -Columns: Ø 450 mm -Spindle stroke: 540 mm -Thread cutting device -automatic feed: 0.037-2.0 mm/rev -Clamping area: 920 x 1600 mm -Dimensions: 2580/1110/H3450 mm -Weight: 6465 kg

Condition: new, The unit is new, complete including controls, diesel tank, exhaust and batteries. Description Model: NWR35 Ricardo Motor Newpower generator generator set Continuous power: 24 kW / 30 kVA Maximum power: 26kW / 33kVA Engine : Kofo RIcardo N4100DS-30, 4 cylinder water-cooled Connection: circuit breaker Frequency : 50 Hz. Voltage: 400/230 V including mechanical speed control, AVR, battery charger, galvanized soundproofing, cooling water heater, Hodpfx Ajn D E Ifjnmsfk Control unit: Comap AMF8, mains feed Dimensions: 2180x960x1260 mm Weight: approx. 900kg Diesel tank: 102 L. At 100% load: 7.15 L/h At 75% load : 5.8 L/h At 50% load : 3.7 L/h Mains monitoring, mains feed, soundproofed Ready for immediate use. Net price: €5,208, gross price: €6,197 additional costs 63A automatic switch: € 500 100A automatic switch: € 620 Shipment: - Worldwide transport including unloading is possible for an extra charge - In order to be able to quote an exact freight price, please send us a request with your data and your complete address -Available from April

Condition: new, Year of construction: 2025, x-travel 580 mm y-travel 200 mm z-travel 340 mm speeds 115 - 1750 U/min table surface area 1000 x 240 mm Hfedotv Riaopfx Anmok tool taper ISO 40 total power requirement 4,5 kW weight of the machine ca. 820 kg dimensions of the machine ca. 1290 x 1090 x 2170 mm Universal precision drilling and milling machine for horizontal and vertical milling work with digital 3-axis position display DPA 31 Plus Description: - Heavy, solid design made of high-quality, vibration-absorbing gray cast iron - Oil bath gear with ground, hardened gear wheels - Coolant system - Halogen machine lamp with bundled beam - Solid and large cross table, precisely surface-machined with T-slots and adjustable wedge strips - Milling head can be tilted ± 45° - Right/left rotation - X-axis moves either with the handwheel or via the table feed device - Automatic limit switch on the X-axis - Height-adjustable protective screen with microswitch, against flying chips and parts, for the greatest possible protection of the user Scope of delivery: - Gear rim drill chuck 1 - 16 mm / B 18 - Arbor drill chuck ISO40 / B18 - Horizontal milling spindle with counter bearing, disc milling cutter holder Ø22 mm, Ø27 mm - Adapter ISO 40/MK3 - Adapter ISO 40/MK2 - Vertical and horizontal drawbar - T-slot nuts - Drifter - Operating tool

Year of construction: 1979, condition: used, pressure 160 t distance between columns 850 mm stroke 400 mm ram surface 800x700 mm Hfjdpfelp Uz Rex Anmek 300 mm pressure of ejector 20 t table surface area 800x700 mm total power requirement kW weight of the machine ca. 12 t dimensions of the machine ca. 1800x1800x4200 m

Condition: used, Technical details: x-travel: 500 mm y-travel: 200 mm z-travel: 300 mm spindle taper ISO: MK 4 quill stroke vertical: 60 mm spindle head swivable left - right: 45° ° Distance- spindle nose to clamping surface: min./max.: 50 / 350 vertical mm throat: vertical 250 mm table clamping surface:: 710 x 200 mm table swivable approx.: 45° rechts/links turning speed range: 50 - 2 240 / 24 step U/min feed:: 25 - 1 120 / 24 step mm/min Hfodpfju Nc Uujx Anmek total power requirement: 3,2 kW weight approx.: 1390 kg dimension machine xH: 1,7 x 1,5 x 1,7 m - spindle center distance / clamping surface vertical: min/max: 50 / 350 mm - spindle nose / clamping surface horizontal: min/max: 0 / 350 mm - travel range of the milling bar 600 mm - without counterholder - incl. machine vice *

Year of construction: 2015, condition: good (used), Able Engineering 500L Tank Chocolate Tank 2015, Stainless, 500L capacity, jacketed mixing tank, Top mounted agitator, central bottom discharge into jacketed Rotan Pump all mounted on skid with load cells, 3Ph Hfodpfxswwp Tzo Anmsk

Condition: used, centre height: 140 mm; table size: 150x1050 mm; Hfjdecbhl Nopfx Anmok longitudinal path (manual): 600 mm; transverse path: 230 mm; height adjustment: 250 mm; 2 engine speed: 1500-3000 rpm; 6 grinding spindle speed: 2000-6000 rpm; biggest grinding wheel diameter: 250 mm;

Condition: used, Frame Saw Esterer LSH Year of Manufacture: 1968 Clearance: 65 cm 500 mm stroke Oscillating frame Automatic overhang adjustment Hydraulic roller lifting With splitter wedge With drive motor With gear transmission With saw blades With hydraulic saw tensioner With suspension system With templates Hsdpfx Answ Dn S Asmofk With log carriage Weiss HdT-L, Year 1996 (can also be sold separately) The machine has been out of operation for quite some time and should be thoroughly checked and overhauled. Location: Austria, near 8700 Leoben

Condition: used, Technical details: power consumption: 240 A voltage: 3x400 V open-circuit voltage: 91 V power consumption: 9,3 kVA weight of the machine approx.: 28 kg dimensions of machine: 1,0 x 0,6 x 1,0 m Welding rectifier (inverter) TIG (steel/VA) and manual electric welding Direct current TIG = up to 240 A / 19.6 V Electric welding = up to 240 A / 19.6 V 2/4-cycle switchover, stepless switchover to pulse Protection class IP 23 Water-cooled and frost protection Shielding gas / solenoid valve Gas-cooled torch head with remote control for welding current Equipment: Hodpfxju U Iixe Anmjfk Hose package 7.4 meters Ground clamp and ground cable 4.2 meters *