Cylindrical grinding machine

Schaudt Mikrosa PF81 x 3000

Condition: used, TECHNICAL DETAILS - Spindle speeds : 5 - 300 [rpm] - C axis indexing precision : 0.001 [°] - Vertical travel of the main spindle : 130 [mm] Hjdpfx Aex Av Adjnmjfk - Vertical travel of the main spindle (manual mode) : 140 [mm] - Rotational speed of the grinding spindle with motor : 4500 - 80.000 [rpm] - Rotational speed of the grinding spindle with turbine : 100.000 - 160.000 [rpm] - Cylindrical grinding without/with intermediate plate max. : 230 / 360 [mm] - Maximum grinding length Z (with block) : 125 [mm] - Maximum acute angle in conical grinding : 16 [°] - Maximum grinding depth in conical grinding with angle : 44 [mm] LINEAR AXES - Travels on X/Y/Z axes : 700 / 500 / 500 [mm] - Rapid traverses rates (X/Y) : 4000 [mm/min] - Cutting feed rates (X/Y) : 0 - 2000 [mm/min] TABLE - Table dimensions : 770 x 630 [mm] - Maximum weight upon table : 500 [kg] - Distance table / spindle nose (min./max.) : 0 - 600 [mm] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 2650 x 2577 [mm] - Machine height : 2677 [mm] - Machine weight : 5600 [kg] MACHINE HOURS - Number of working hours : 44995 [h] EQUIPMENT - CNC : Fanuc - Coolant tank * with high-pressure pump * with paper filtering unit - Oil mist extractor - Fire extinguisher * * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer.

Condition: used, O F F E R We can offer you ex stock, subject to prior sale and errors: TSCHUDIN (CH) Centerless cylindrical grinding machine Model TC-300 Year of manufacture 2001 Grinding range – Ø 0.5 – 25 mm (30) Max. workpiece length for plunge grinding 125 mm (140) Max. workpiece length for through-feed grinding 300 mm Grinding wheel dimensions: Ø x width Ø 300 x 125 mm (140) Regulating wheel dimensions: Ø x width Ø 225 x 125 mm (140) Grinding wheel peripheral speed 35 m/sec Grinding wheel infeed 3 mm Regulating wheel speeds, steplessly adjustable 0 – 444 rpm Regulating wheel inclination Degrees Grinding wheel drive approx. 7.5 kW Total connected load approx. 13 kW – 380 V – 50 Hz Weight 2,500 kg Accessories / Special equipment: • The machine operates with a fixed workpiece position, allowing both the grinding spindle and the regulating spindle units to be adjustable. This simplifies machine setup as well as automatic workpiece loading and unloading. • SIEMENS PLC control for automatic operation with SIEMENS touchscreen. Complete electrics and PLC control renewed in 2016! • Electromechanical profile dressing device for the regulating wheel • Regulating and grinding wheel speeds are steplessly adjustable. • Adjustable plunge guide bridge with mounted plunge workpiece rest • Electromechanically controlled workpiece pusher & automatic pneumatic workpiece ejector • Additional outfeed cylinder for automatic tilting of workpieces after plunge grinding (adjustable 4–30 mm) Hodpfjwftt Usx Anmofk • Machine is prepared for use with a HELP-TEC bar loader MSHL08/400P, which is currently not present. • Complete enclosure of working area with monitoring technology • Separate control cabinet, operating and electrical manuals for the retrofit Condition: Very good! Fitted with new electronics in 2016! Click here for a video of the machine: Delivery: ex stock, immediately available, FCA Metzingen Payment: strictly net – after receipt of invoice Always a large selection of grinding machines in stock – please inquire for your requirements!

Condition: ready for operation (used), Year of construction: 1997, operating hours: 20,045 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 60,000 rpm, spindle speed (min.): 9,000 rpm, table load: 300 kg, overall weight: 4,500 kg, travel distance W-axis: 450 mm, Equipment: documentation/manual, For sale: used Hauser S35-400 coordinate grinding machine, year of manufacture 1997, in well-maintained condition with various accessories as shown in the photos. Travel paths: X-axis: 500 mm Hedpfeyywb Sjx Anmofk Y-axis: 300 mm W-axis: 450 mm Z-axis feed rate, stepless: 0.5–14,000 mm/min Table size: 600 x 380 mm Maximum table load: 300 kg Control: GE Fanuc Series 16-M Dimensions (L/W/H): 4.25 m x 4 m x 3.25 m Total weight: 4,500 kg Machine is immediately available! Price includes loading onto truck!

Condition: excellent (used), Year of construction: 2018, total length: 9,800 mm, total width: 4,000 mm, feed length X-axis: 3,500 mm, feed length Y-axis: 1,100 mm, feed length Z-axis: 1,100 mm, feed rate X-axis: 30,000 m/min, feed rate Z-axis: 5,000 m/min, table length: 3,000 mm, table load: 6,000 kg, table width: 1,200 mm, power: 22 kW (29.91 HP), Surface grinder Ziersch - Z1030 MACH-ID 9597 Make: Ziersch Type: Z1030 Control: Mitsubishi Touch Year: 2018 X - Travel: 3500mm Y - Travel: 1100mm Z - Travel: 1100mm Table Length: 3000mm Table Width: 1200mm Table load: 6000 Feed rate X-Axis: 30000mm/min. Feed rate Z-Axis: 5000mm/min. Grinding stone dimensions:500 x 100 x 203mm Power: 22kW Speeds: 3000Rpm Cooling system: yes Feed rate Y-Axis: 3000mm/min. Length: 9800mm Width: 4000mm Height: 4500mm Hjdpfx Aney En Dnemjfk Weight: 27500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, TECHNICAL DETAILS - Distance between centers : 1000 [mm] - center height : 175 [mm] - Table orientation : 9 [°] GRINDING WHEEL HOLDER HEADSTOCK - Left grinding wheels dimensions : 400 x 50 x 127 [mm] - Right grinding wheels dimensions : 225 x 20 x 76,2 [mm] - Power : 3 [kW] - Spindle speeds : 1500 / 1700 / 2200 [rpm] - Orientation of grinding wheel holder headstock : 270 [°] - Boring for internal spindle : 90 [mm] PART-HOLDER HEADSTOCK - Orientation of part holder headstock : 360 [°] - Spindle speeds : 20 - 400 [rpm] - Spindle internal cone : Morse 5 - Power : 0.9 [kW] TAILSTOCK - Internal cone : Morse 3 - Quill stroke : 30 [mm] POWER SUPPLY - Supply voltage : 380 [V] WEIGHT & DIMENSIONS - Machine floor space : 2860 x 1680 [mm] - Machine height : 1670 [mm] - Machine weight : 2500 [kg] EQUIPMENT - Automatic cycle work (rough part, finishing and reverse) - Kelco 5 display - Coolant tank * with paper filtering unit - 1 internal grinding spindle : 5400 [rpm] Hedpozfqzaofx Anmjfk - Chuck 4 jaws - 1 three-key steady rest - Set of wheels

Condition: used, Year of construction: 1996, Technical details: Hsdewwlvlopfx Anmsfk turning diameter: 500 mm turning length: 1500 mm turning diameter over bed slide: 290 spindle bore: 71 mm turning speed range: 3 - 2800 U/min rapid speed: 10 / 5 m/min feed speeds: 1 - 2000 mm/min total power requirement: 22 kW weight of the machine ca.: 3,2 t dimensions of the machine ca.: 3,0 x 1,6 x 2 m with Teach In controll R&D MTC-K PARAT toolpost 1 fixed steday dia. 100 mm 4 jaw face plate dia. 500 mm coolant attachment *

Condition: good (used), Year of construction: 2007, Height of points 150 mm Distance between points 1000 mm Grinding wheel dimensions (h x id x w) Ø400xØ127x50mm Internal head 4 pcs Center height 150mm Max. workpiece weight 80Kg X-axis travel (transverse) 350mm X axis speed 10 meters per minute Hfodpfx Asrakimonmek Z axis travel (longitudinal) 1000mm Z-axis speed 12 meters per minute Z-axis resolution 0.00004" B-axis turning range 210° B-axis resolution 0.00004 B-axis resolution 0.0001° B-axis resolution 0.0001 Drive capacity 10 HP Grinding wheel diameter 400mm Max. width Grinding wheel width 63mm Spindle Speed Range 0-1000 RPM Spindle turning range 0° - 90° Tailstock stroke 30mm Tailstock stroke 30mm Equipped with Fanuc 21i-TB CNC Control Dimensions 3350x 2130x 2130 Weight 4535Kg Accessories: Steady rests, magnetic chuck, 3-jaw chuck, balancer, sensitron 6, coolant with paper and magnetic filter, fume extractor, etc.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: CR690, overall weight: 1,350 kg, load capacity: 100,000 kg, Electric Chassis System Robot 100 Ton Set – OX TBC 100 The self-propelled trolleys offer a high load capacity of 100 tons and a very low height, with the ability to rotate 360°, making it possible to position them under all types of loads and for maneuvering. Motor-driven trolley models with hydraulic lifting cylinders are also available for loading onto vehicles or shelves, offering a speed of up to 5 m/min max. Hedjw Taikopfx Anmofk Length - 1602 mm Width - 2019 mm Height - 315 mm Max. load/lifting capacity - 100 tons Remote control

Condition: excellent (used), x: 3200mm y: 1500mm z: 1000 CNC FAGOR 8050 (7 axes) Hfodjwrx U Djpfx Anmsk

Year of construction: 2010, condition: ready for operation (used), One CNC lathe Takamaz X180 available. Turning diameter: 210mm, turning length: 230mm, spindle bore: 51mm, speed: 3500rpm, number of axes: 3, tool positions: 12, chuck size: 8inch (Kitagawa B208, 200mm), control: Fanuc 0i-TC, weight: approx. 4000kg. Hfedpfstqfq Hex Anmjk