Heavy-duty chassis, electric chassis,

OX Robot TBC 100

Condition: excellent (used), Year of construction: 2022, Four Kardex Shuttle XP 500 units from 2022 for sale. Since installation, the machines have been regularly maintained by the manufacturer and are in very good condition. These Vertical Lift Modules are equipped with trays measuring 4,050 mm wide and 813 mm deep. This is Kardex’s widest standard model, offering ample storage capacity while keeping the footprint to a minimum. The machines stand 4,950 mm tall, making them ideal for use in facilities with lower ceiling heights that still require increased storage capacity. Each tray provides approximately 3.3 m² of storage space. With about 35 trays per machine, each unit delivers around 115 m² of storage. Combined, the four machines offer approximately 460 m² of storage area, while occupying only 52 m² of floor space. Every tray supports up to 320 kg, giving each machine a total load capacity of up to 11,200 kg with 35 trays installed. If needed, additional trays can be added. All trays feature 75 mm high tray edges. The machines are in excellent condition and are ideally suited for companies looking to maximize storage capacity efficiently. Technical Information: Year of manufacture: 2022 Model: SHUTTLE-XP-500-4050x813 Machine height: 4,950 mm Machine width: 4,380 mm Kledpsy R U Nzofx Abfsu Machine depth: 2,972 mm Tray width: 4,050 mm Tray depth: 813 mm Number of trays: Approx. 35 per machine Maximum load per tray: 320 kg Electrical specification: 3/N/PE 400V, 23A

Condition: ready for operation (used), Printing units: 2+1 flexo printing units, max. output with dextrin: 900 envelopes/min, paper weight: 70g/m²-120g/m². Formats: Book format min./max: 83x120mm/185x330mm, Diagonal format min./max: 83x120mm/185x265mm. On-site inspection is possible. Kljdpjtq Ha Tsfx Abfsu

Condition: ready for operation (used), A Winkel + Dünnebier 26 FF envelope printing machine is available. On-site inspection is possible. Klodpfx Astq Hbfobfeu

Condition: new, Due to its dynamics and efficiency, the Jantar is the most frequently chosen model of Eckert machines. It is used by large industrial companies and medium-sized businesses looking for both an economical and reliable solution. The Jantar plasma cutting machine can be equipped with a plasma and oxyfuel cutting system and a wide range of accessories. (marking, drilling and machining of tubes and profiles). The design of the machine has been optimized over the years for maximum reliability, as confirmed by hundreds of customers throughout Europe. Main features -attractive price of a very well equipped basic version -Highly dynamic and precise cutting of 2D applications, tubes and profiles -cutting capacity from 0,5mm to 100mm material thickness -Comprehensive database with predefined cutting parameters -Possibility to optionally extend the length of the working area Kodpfx Ajf Alb Ajbfslu Technical data Drive Servo AC Available working widths 1.500, 2.000, 2.500, 3.000 mm Available working length Any length from 1.500 mm positioning speed 25,000 mm/min cutting thickness up to 100 mm Cutting quality DIN-EN ISO 9013 Positioning accuracy DIN-EN 28206 Repeat accuracy DIN-EN 28206 Electrical systems DIN-EN 81346 Safety module DIN-EN 13850 Working height 740-760 mm Working - ambient temperature + 5 °C to 45 °C Working - Humidity max. 90%

Condition: ready for operation (used), Refurbished - 2008 UV - full or spot TG Color system Kledpjxhfwuefx Abfou

Condition: new, weight max. in kg 1000 kg arm length 4000 mm height 3000 Unterkante Ausleger total column height 3790 mm swivelling range 270 Grad Total weight, approx. 525 kg Description: - Trolley power supply - Trailing cable, cable slack approx. 800 mm Kledpfxexak Hxo Abfju - Operation from the hallway using a pendant control including: - ABUS electric chain hoist - Chain hoist type GM 4 1000.5-2, 2-leg - painted in color RAL 5017 traffic blue - Load capacity 1 t - hook path 3000 mm - highest hook position 2442 mm - Calculation basis FEM 9.901 - Drive group 2m / M5 - Lifting, 2-stage (pole switchable) 1.3 / 5 m / min - Lifting capacity 0.22 / 0.9 kW - duty cycle 60% ED - Circuits 360 c / h Overload protection The crane system complies with the requirements of the Machinery Directive 2006/ 42 / EC as well as the currently valid UV regulations DGUV regulation 52 (formerly BGV D6). included : - Anchor rods L200 (set) size LS 200 - Consists of 8 pieces M27 mm x 800 mm with 1 steel template (500/8) - for fixing the foundation, including accessories for grouting There is an assembly gap between the column base to align the slewing crane and building floor to be provided. The assembly gap is after approx. 4 weeks Crane operation to be poured under by the customer. Fig. Shows a similar crane system

Condition: used, Year of construction: 2011, cutting diameter 260 mm saw band length 3340 x 27 x 0,9 mm capacity 90 degrees: square 260 mm capacity 90 degrees: flat 380 x 260 mm band speed 37 / 74 m/min sawing motor 1,5 kW weight of the machine ca. 0,62 t dimensions of the machine ca. 1,7 x 1,4 x 1,3 m Miter band saw - Semi-automatic - Double miter - Material detection during lowering Kedpswkvq Hjfx Abfelu - incl. 7 saw blades

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. Kljdsfz U S Espfx Abfju This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Condition: excellent (used), Year of construction: 1997, operating hours: 212 h, functionality: fully functional, color channels: 5, CP-Tronic digital machine control system CPC 1-04 Center control console with remote control unit for color zones, color ducts, and circumferential, lateral, and diagonal registration, with light guide and job memory card Alcolor film dampening system with circulation and cooling Ink temperature control (water-cooled) Autoplate automatic plate changing system Preset automatic format setting Automatic ink roller washing system Automatic blanket and impression cylinder washing system Kjdezcwl Uepfx Abfjlu Powder sprayer High-stack delivery Standard accessories

Year of construction: 2007, condition: ready for operation (used), A CNC profile drilling machine Voortman with a movable drilling cabin is available. Working height range: 30mm-1050mm, positioning speed: 40m/min, table width: 300mm, max. working width: 1800mm, support depth: 1500mm, tool stations: 5, max. travel speed: 40m/min, tool holder: SK40, drilling diameter range: 5mm-40mm, thread cutting range: M6-M30, working length: 16200mm. Documentation available. On-site inspection possible. Kodpoxp Rb Isfx Abfjlu