Werzeug pressing tool punching tool

Schüco

Year of construction: 2006, condition: ready for operation (used), overall weight: 880 kg, Profile Rolling / Crimping Machine manufactured in 2006. This SCHÜCO ISOMAT 4 features a maximum operating pressure of 0.8 MPa and a nominal pressure of 0.7 MPa. With a machine weight of 880 kg and an additional safety roller set weighing 250 kg, it is designed for robust performance. If you are looking to get high-quality profile rolling capabilities, consider the SCHÜCO ISOMAT 4 machine we have for sale. Contact us for further details. • Supply Voltage: 400 V • Frequency: 50 Hz • Rated Current: 3.5 A • Power: 1.2 kW • Maximum Operating Pressure: 0.8 MPa • Nominal Pressure: 0.7 MPa Bjdpfx Aajypcilj Ejld Additional equipment • Safety Roller Set (Richtrollensatz), 250 kg

Condition: used, Year of construction: 2021, saw blade diameter: 800 mm, rotational speed (min.): 1,450 rpm, power: 5.5 kW (7.48 HP), Crosscut saw AS Very good, well-maintained condition Saw blade diameter 800mm. Sturdy tubular steel base frame. Powerful saw motors. Pneumatic material clamps (3 vertical). 2-hand safety operation. Coolant device. Bodpfxod Szf Ns Aa Esld Protective hood. Optionally with length measuring system or automatic positioning system. Version as automatic saw-drilling machine or automatic saw-punching machine on request.

Condition: ready for operation (used), Year of construction: 2004, overall weight: 5,000 kg, spindle motor power: 21,000 W, number of axes: 4, This 4-axis SCHÜCO Profilbearbeitungscenter 299 650 was manufactured in 2004. It features a powerful 21 kW motor and operates at a voltage of 380 V. With a maximum operating pressure of 0.8 MPa and a weight of 5,000 kg, this machine is designed for robust performance. If you are looking to get high-quality machining capabilities, consider the SCHÜCO Profilbearbeitungscenter 299 650 universal machining centre we have for sale. Contact us for further details. • Voltage: 380 V • Frequency: 50 Hz • Current consumption: 42 A • Maximum operating pressure: 0.8 MPa • Nominal pressure: 0.6 MPa • Maximum air consumption: 200 NL/min Additional equipment Bsdeypcgqjpfx Aa Eeld • Wireless handheld scanner

Year of construction: 2009, condition: used, Technical Data Processing Length max. [mm] : 7,200 Nksbq Eeynir Dory Alsu Dimensions [mm] : 9,000 x 2,000 x 2,700 Weigh PBX AL [kg] : 3,500 Pneumatic Operation Pressure [bar] : 6 Positioning Accuracy [mm/1000mm] : ± 0.1 mm Rotation Angle A axis max. [°] : 180 Capacity Work Spindle [KW] : 7.5 at 12.000 min-1 Speed Work Spindle max. [min-1] : 24,000 Tools: Tool Length max. [mm] : 160 Tool Ø up to max. Length max. [mm] : 50 at max. Length max. [mm] : 120 Tool Holding Fixture : SK 30 Electrical Connection : Bsdsynkkuepfx Aa Eeld Nominal Voltage/Frequency [V/Hz] : 400/50 Number of Phases/Zero Conductors/Earth Conductors : 3/N/PE Nominal Current Consumption [A] : 35

Condition: used, US-2100 - 75 mm Bledpjwrp Insfx Aa Eod Increasingly wider bands are being demanded for the logistical and sales-promoting bundling of units. The US-2100 with its unique ultra-sonic sealing processes paper and plastic bands with a width of 75 or 100 mm. The bands offer plenty of space for printing marketing-related information. The machine is easily accessible, usable in small spaces, and offers high safety.

Year of construction: 2009, condition: used, Schüco PAS compact Bljdpfxsyni Sks Aa Eed

Condition: used, Year of construction: 2007, Technical data • Milling spindle speed: From 2800 to 12000 rpm • Interpolated working movements for the X and Y axis, CNC • Motorised lowering of the Z axis via buttons with speed control via a rotary potentiometer • Electrical equipment with graphic display for simple and intuitive use of the program with graphical indication of the shapes to be carried out and the possibility to program a work sequence at the 3 machining levels • Traversing of the X and Y axis with brushless motors and high-precision drives; both are mounted on racks with Bljdpfxjyni Nis Aa Ejd helical teeth without play • Work surface with pneumatically controlled rotation from -90° to +90° • Height of the work surface: 850 mm • Tool lubrication via manually adjustable mist oiler • Maximum operational safety provided by deadman switch and buttons • Pneumatic horizontal clamps, can be moved along the work surface • Double operating pressure with safety valves • Automatic correction of the tool diameter via software • Milling capacity: X = 2600 mm Y = 315 mm Z = 230 mm • Three-phase milling spindle: 4 KW - 2800 rpm. - 230/400 V 50 Hz

Condition: good (used), Seamer Make: Lubeca Typ: automatic 6-head seamer for round cans Model: LW 202 Tooling: can size ø 85 mm – EO lids Bjdpeiba E Djfx Aa Eeld Capacity: up to 12.000 cans per hour Range: diameter 52-113mm / Hight 50-180mm Frame: cast iron lacquered Power supply: 380 V – 50 Hz – 4 kW Dimensions: L x W x H = 700 x 1.200 x 1.600 mm Weight: 600 Kg as-is or adjusted to customer needs

Condition: used, Schüco PDG E CUT Bedpfxsyni Aps Aa Esld

Condition: used, Year of construction: 2009, Technical data: Schuco PDG DUAL CUT 283 720 Bsdpfxeyniyho Aa Eold Weight 5500 kg • Carbide saw blades Ø 600 mm • Three-phase motors: 3.7 kW-2880 rpm-230/400V-50 Hz • Saw blade speed 2410 rpm • Saw blade shaft diameter 40 mm • Saw blade tilt with electronic control: from 90° to 45° inside • Head rotation with electronic control: from 50° outside to 22.5° inside • 1st head = fixed head • Second head movable with automatic positioning • Positioning speed (automatic) of the movable head: 25 m/min • Positioning accuracy of the movable head: +/-0.1 mm • Smallest cutting length between the two heads at 90° is 405mm • Largest cutting length between the two heads (at 90°): 6000 mm • Double operating pressure • Max. air consumption per work cycle: 82.3 NI (normal liters) • Hydropneumatic feed of the carbide saw blades (adjustable feed speed-quick retraction) • 4 vertical pneumatic clamping devices • Micro-drop lubrication of the cut with pure oil • Preparation for chip and smoke extraction 1 • Operating pressure: 7 bar (adjustable)

Condition: used, The Mubea tools shown are not sold in their entirety. You can tell us what kind of punches and dies you need, so that we can put together an individual range for you. Bjdpfxof Srpcj Aa Eold

Year of construction: 2009, condition: used, Technical Data Processing Length max. [mm] : 7,200 Dimensions [mm] : 9,000 x 2,000 x 2,700 Weigh PBX AL [kg] : 3,500 Pneumatic Operation Pressure [bar] : 6 Positioning Accuracy [mm/1000mm] : ± 0.1 mm Rotation Angle A axis max. [°] : 180 Capacity Work Spindle [KW] : 7.5 at 12.000 min-1 Speed Work Spindle max. [min-1] : 24,000 Tools: Tool Length max. [mm] : 160 Bsdpfx Aaoynir De Eeld Tool Ø up to max. Length max. [mm] : 50 at max. Length max. [mm] : 120 Tool Holding Fixture : SK 30 Electrical Connection : Nominal Voltage/Frequency [V/Hz] : 400/50 Number of Phases/Zero Conductors/Earth Conductors : 3/N/PE Nominal Current Consumption [A] : 35

Year of construction: 2017, condition: used, The AF 500 is a five-axis CNC machine ideally suited for reducing fabrication costs. Machining lengths up to 7.3 m, excess lengths in two stages, three-sided processing, and end-of-profile machining enable the production of window, door, and façade systems. Number of NC driven axes - 8 Tool holder - HSK-63F Maximum disc milling cutter diameter [mm] - 500 Bedpfoyngcgox Aa Ejld Speed range [rpm] - 24,000 Routing motor output [kW] from speed [rpm] - 15 kW (S1) Number of spaces in tool magazine - 20 (a saw blade with Ø 500 mm occupies 3 spaces in the tool changer) Automatic clamping - Yes Maximum processing cross section (W x H x L) [mm] - 450 x 350 x 7,300 (with 250 mm tool length) / 500 x 350 x 7,300 (with 200 mm tool length) Minimum processing cross section (W x H x L) [mm] - 30 x 30 x 300 (with 200 mm tool length) Maximum profile weight - 14 kg/m

Condition: good (used), OFFER 70105 Blsdpfsg T S Axex Aa Ejd Technical data: - Hole diameter approx. 44 , 45 , 48 , 52 , 2 x 55 , 2 x 58 , 61 , 66 mm - 2 x 68 , 2 x 80 , 81 , 85 mm - oblong hole dimension approx. 12 x 42 , 12 x 50 , 18 x 55 mm - Punch holder 58 mm - punch height 54 + 58 mm - Adapter ring for punch - die height 30 + 40 mm - die outer diameter 90 + 140 mm - adapter ring for dies 90 - 140 mm - Weight approx. 90 Kg

Year of construction: 2008, condition: used, Technical data: The ISOMAT 5 machine is solely intended for fabricating complete profiles by pressing two half profiles from SCHÜCO’s profile systems together. Blodpfx Aaeynf N Ss Esd ISOMAT 5 (Art. No.: 299 563) Electricity Supply: 380 V, 50 Hz Consumption: 1.1 kW