Welding positioner 6t

Sartore PTA 6000

Condition: new, Year of construction: 2024, Container turning device 10 tons lifting capacity Double drive Synkron Axle distance steplessly adjustable by means of thread Bdjdpsifk Rbjfx Ab Tok speed infinitely variable with foot remote control diameter from 300mm to 3500mm Roll width and diameter 120 x 270mm Speed 200 - 1200 mm/min.

Condition: excellent (used), Four-jaw chuck make Roto Record type DHK 315 x 4 short taper size 8 Bodpfx Asg Rxh Isb Tjdk taper diameter 139,735 bolt circle diameter 171,4 mm diameter 315 mm Jaws individually adjustable

Year of construction: 2022, condition: new, Technical data: - load capacity: 10.000 kg - Own weight: 850kg - Insertable workpiece diameter: 50 - 3500 mm - Roll diameter: 250mm - Roll width 160mm - turning speed approx. 100-2.000 mm/min - Two-pedal foot switch - Potentiometer for infinitely variable speed control Bdodpfx Abefxw H Ao Tek

Condition: new, Year of construction: 2022, Protec welding rotary table 10000 Kg load capacity Speed infinitely variable 0,05 - 0,5 rpm Bjdpfx Absd An Aie Tsdk hand and foot remote control height 650mm diameter 1800mm

Condition: good (used), Year of construction: 2024, Welding turntable KT 300 Load horizontal 300 KG, tilted 150 KG Power consumption 220V, 50 Hz table diameter 450mm Bdjdpjbvk I Esfx Ab Tek height 500mm Tilt range stepless via crank gear motor 0 - 90°. speed 0,3 - 2,5 rpm Incl. foot remote control Surcharge: Quick release - jaw chuck diameter 300mm, 450.-€

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 8044000703A, Siemens 840 D Control Bdodpfsw T Sqyox Ab Tjk Country of manufacture: EU - Poland Voltage: 400V Dimensions: 3082x2260x1775 mm (with chip tray) 4228x2260x1775 mm (with chip conveyor) Machine net weight: 3400 kg TECHNICAL SPECIFICATIONS CTX 310 ecoline V1/V3 New Design Working capacity Max swing over bed: 330 mm Swing over cross-slide (X): 260 mm Max turning diameter: Ø 200 mm Chuck diameter: Ø 210 mm X-axis travel: 182.5 mm Z-axis travel: 455 mm Centre height: 190 mm Centre distance: 581 mm Feed drives Rapid traverse X and Z axes: 30 m/min Control: Siemens Sinumerik 840D Slim Line C axis with Siemens control Speed: 0 – 100 rpm Torque: 112 Nm Accuracy: < 0.04° Spindle Spindle nose: 140 h5 mm Front bearing diameter: 100 mm Spindle bore: Ø 74.3 mm Max bar capacity: 51 mm Main drive with Siemens control Drive power (40% / 100% duty cycle): 16.5 / 11 kW Torque (40% / 100% duty cycle): 166.5 / 112 Nm Max speed: 5,000 rpm Turret Number of tool stations: 12 Tool interface: DIN69880 (VDI 3425) Disc diameter: 30 mm Change time (with locking): 0.95 sec Change time (without locking): 0.4 sec Tool turret with Siemens control Number of driven tools: 12 Drive power (40% duty cycle) at 4000 rpm: 8.4 kW Torque (40%): 20 Nm Max speed: 4,500 rpm Tailstock Automatic travel: 396 mm Quill bore: flange Max quill force: 400 daN Hydraulic unit Tank capacity: 50 L Max pressure: 50 bar Coolant system Tank capacity: 175 L Capacity with conveyor: 200 L Pump power: 0.85 kW Pump flow rate at 5 bar: 30 L/min Electrical connection Max power: 21 kVA Current: 400V Frequency: 50-60Hz Fuses: 33A Pneumatics Compressed air connection: 6 bar Environmental conditions Room temperature: +15 to +35°C Max humidity: 75% All information is provided without obligation and subject to possible errors or omissions.

Condition: new, Year of construction: 2024, Protec welding rotary table 20000 Kg load capacity speed infinitely variable 0,05 - 0,35 rpm Hand remote control foot remote control extra charge 390.-€ Bdjdpfx Aoid Szkjb Tek height 700mm diameter 2000mm

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,000 mm, rapid traverse X-axis: 25,000 m/min, rapid traverse Y-axis: 25,000 m/min, year of last overhaul: 2025, RepairFIT by Dornhöfer Bjdpfx Aev Rw Uuob Tsdk The Difference. Including installation and commissioning! Technical details of the machine: Year of manufacture: 2008 Control: Heidenhain iTNC 530 Travel range: X-axis (mm) 2,500 Y-axis (mm) 1,250 Z-axis (mm) 1,000 Rotary table size: Length (mm) 1,000 Width (mm) 1,000 Spindle speed range: 15,000 rpm Feed rates: X, Y & Z axes (mm/min): 10 - 10,000 Max. rapid traverse speed X, Y & Z axes (mm/min): 25,000 Milling head: Automatic milling head, vertical Tool holder: HSK 63 A Main spindle drive power: 100% duty cycle KW25 - Chip conveyor - Cooling lubricant system - 3D thermal expansion compensation - Portable electronic handwheel Heidenhain HR 410 with 3m spiral cable - INA RUE 45 linear guideway system on all linear axes with central lubrication - Complete splash guard enclosure RepairFIT is our proven offering for a profitable entry into our product lines. The machines available in this line are procured by us following a rigorous selection process and subjected to a thorough inspection (deep dive check). After intensive cleaning, any obvious defects and faults identified are professionally repaired by our expert service team.

Condition: good (used), Year of construction: 1998, machine/vehicle number: A 1040, Offer 23342 Hydr. welding turntable and tilting table - three axes - welding manipulator Technical data: - max. load capacity 750 kg - Flat plate diameter 700 mm - min. Table height in horizontal position approx. 720 mm - Average table height in horizontal position approx. 920 mm - Max. table height in horizontal position approx. 1060 mm - Working height manually adjustable in 3 steps Bdodsraiu Djpfx Ab Tsk - Faceplate mot.rotatable + swivel or tiltable - Rotation electr. infinitely variable approx. 0.01 - 2.0 rpm - Right + left rotation - Welding current transmission approx. 700 A - Drive 400 V - Connected load 1.5 kW - Manual remote control for direction of rotation, swivel or tilt - Space requirement approx. W 1100 x H 750 x D 700 mm - Weight approx. 500 kg

Condition: new, NEW No.1 available for immediate delivery CE Warranty The MACC SPECIAL 335 MS is a semi-automatic band saw for the cutting of solid bars and profiles of small dimensions, with high efficiency and excellent precision. The robust structure gives the machine the necessary rigidity and precision to the cutting group. The belt drive is equipped with a two-speed motor and a special reducer complete with bronze gear with hardened and ground worm screw. The flywheels are suitably sized and the belt guides are sturdy and made with watertight bearings and adjustable carbide plates. By means of the electromechanical microswitch control it is possible to tension the band with the rotation of the blade. Equipped with an accident-prevention safety device on the flywheel cover and on the blade, the machine is completed by a rotating table for resting the material and a vice with a rapid approach device. Operation. The machine: 1. closes the vice and activates the band motor 2. makes the arc descend for cutting 3. the arc returns to the starting position 4. stops the band motor 5. opens the vice Manual cutting possibility Cutting speed (m/min) 38-77 Cutting thickness (mm) 1,2 Cutting range From 45 sx 60 dx Stop for cuts of the same size Adjustable Electric pump for cooling the band 0,06 kW Cutting capacity at 0°. Bdjdsg S Ui Ajpfx Ab Tjk