Edge grinder

Samco Unilev 15

Condition: used, Used machine Year of manufacture: 1988 Condition: well-maintained Equipment and technical specifications: - Length of worktables: 1,440 mm - Total width of two worktables: 710 mm - Worktable tilt adjustment: 0 – 30 degrees - Working pressure: 6 bar - Sanding belt length: 2,170 mm - Sanding belt width: 150 mm - Sanding belt speed: 10 – 20 m/sec - Vertical adjustment of oscillation unit: 125 mm - Air consumption: 25 NL/min - Electrical: 400 V / 2.9 kW Weight: 490 kg Gedpfxoxzl Aqs Agbebg Availability: short notice Storage location: 63934 Röllbach

Condition: excellent (used), Heavy-duty double-sided edge sanding machine, oscillating Motor power approx. 3.0 kW Oscillation with own motor approx. 0.2 kW Sanding belt dimensions 3000 mm x 200 mm Front sanding table 980 x 340 mm rear sanding table 750 x 300 Space requirement L x W x H approx. = 1800 x 1500 x 1000 mm Weight approx. 600 kg Godpfx Asuxqzujgbobg Front sanding table with veneer edge sanding device Rear sanding table with infinitely variable angle adjustment Angle stop on rear work table Oscillation by means of gear motor Pneumatically height-adjustable sanding beam Interchangeable radius sanding discs Pneumatic belt tension, adjustable Extraction with blower Attachment option for feed unit 2 lateral support tables for radius sanding Note on used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: ready for operation (used), Working table length 144 cm, working table width 71 cm, operating pressure 6 bar, working table tilting 30 degrees, sanding belt width 15 cm Gjdpowx H A Ajfx Agbsbg

Condition: used, cleaned, function checked, test runPneumatic rotary switch new3/2 way valve newRebuilt band oszilationnew pressure regulator installedmachine adjustedused, good conditionmanufactured by Samcotype Unilev 15 NMasch.-No. AM / 030640motor 3 kWoscillation pneumaticveneer edge sanding unitfront table ca. 1200 x 220 mmrear table ca. 1200 x 220 mmtable tiltabledouble sidedband tension pneumaticmitre cutting guideheight adjustment aggregateexhaust connection D 100 mmrequired space ca. l x w x h mm1300 x 800 x 1800weight ca. 450 kglocated in 97447 Gerolzhofen, free on truck, unpackedsale in current condition as seen Gbsdjvwgf Nopfx Agbjg

Condition: excellent (used), Genini Miniautomatic Pass-Through Lathe Turning machine from square timber Main spindle with a two-speed motor with a power of 4.9/5.9kw Hydraulic pump motor with a power of 1.5kw Gbjdpfxjv Hgcto Agbeg Maximum length of square timber 950mm Maximum turning length 120mm Maximum turning diameter 80mm Two supports with profiling knives 1 front spindle for drilling or front profiling 1 roughing turning knife Machine weight approx. 1800kg

Condition: excellent (used), Belt dimensions 150 x 2170 mm Two belt rotation speeds Adjustable boot Both upper parts are adjustable at an angle of 0-30 degrees Gedpepq R Uaofx Agbsbg Adjustable grinding height

Year of construction: 2005, condition: good (used), machine/vehicle number: C9 15840, Profile brushing machine Tagliabue LB 2 Godpjg Rn Iaefx Agbjbg Model: LB 2 TECHNICAL DATA: Year of manufacture: 2005 Tagliabue edge sander with 4 oscillanting sanding units. Two vertical rollers and 2 inner transversal rollers, for transversal brushing.

Condition: new, MAIN FEATURES OF THE MACHINE: -Single head drilling machine for drilling in the range of 0 - 90 °. -Pneumatically adjustable head angle -Cast-iron spindles -Spindles adapted for quick-connections -Pneumatic material clamps -Cast iron working table -Fast and accurate adjustment -Precision drilling STANDARD EQUIPMENT OF THE MACHINE: -2 1.5 m long aluminum rulers (right and left) with two stoppers -5 quick-action chucks Technical data: Number of spindles: 21 Distance between first and last drill bit: 640 mm Number of pneumatic presses: 2 Distance between centers of individual spindles: 32 mm Max drilling depth: 65 mm Air consumption: 10 l/cycle Gbjdpfxsp Ecdgj Agbog Max workpiece size: 915 x 3000 mm Max workpiece thickness: 70 mm Working pressure: 6 - 7 bar Rotation: 2800 rpm. Motor power: 1.5 kW Noise level: 76.1 dB Overall dimensions: Length: 1030 mm Width: 1030 mm Height: 1285 mm

Condition: excellent (used), Maggi Boring System 35 Multi-spindle Drill Number of spindles 35 Spacing between spindles 32mm Distance between first and last spindle 1088mm Gbodpsvx Aqdofx Agbjg Maximum drilling depth 85mm Spindle speed 2800r.p.m Number of pneumatic clamps 4 Machine working pressure 6-8bar Air demand per cycle 15l Number of motors 2×1.5kw Weight 450kg CE certificate

Condition: ready for operation (used), There are 2 compressors available. 1) CSC from 300-670, year of manufacture: 1997. 2) Atlas Copco GX5FF EP, year of manufacture: 2019. Motor power: 5.5kW, max. operating pressure: 10bar, capacity FAD: 13l/s, 46.8m³/hr, 27.5cfm, noise level: 65dB(A), standard air tank size: 200l. Dimensions X/Y/Z: approx. 1430mm/665mm/1260mm, weight: 210kg. Documentation available. Godstnf Iujpfx Agbsbg