Folder

Salvagnini P4

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, workpiece length (max.): 3,048 mm, workpiece width (max.): 1,524 mm, sheet thickness (max.): 3 mm, table load: 5,000 kg, No minimum price – guaranteed sale to the highest bidder! The machine’s control system and software have been renewed! TECHNICAL DETAILS Sheet thickness for circuit boards with a tensile strength of 400 N/mm² max.: 3.5 mm Sheet thickness min.: 0.5 mm Punch head force max.: 4 presses with max. force of 7 t & 4 presses with max. force of 26 t Force of the lower cylinder max.: 6 t Double-punch punching force: 12 t (2 hydraulic punches) Length of the input sheet min.: 370 mm Length of the input sheet max.: 3,048 mm Width of the input sheet min.: 300 mm Width of the input sheet max.: 1,524 mm Diagonal of the input sheet max.: 3,408 mm Length of the output sheet min.: 250 mm Length of the output sheet max.: 3,048 mm Width of the output sheet min.: 60 mm Width of the output sheet max.: 1,524 mm Vertical travel of the scissor lift table: 550 mm Usable load capacity of the scissor lift table: 5,000 kg Dimensions of the transportable stack of sheets min.: 300 x 100 mm MACHINE DETAILS Electrical data Voltage: 380 V Frequency: 50 Hz Hsdpfxozzkt Uj Aitsnu Current: 119 A Rated power: 61 kW Cooling capacity of the unit: 32.2 kW EQUIPMENT Scissor lift table TC27155C Motorized roller bed PRL3814F Universal destacking device DUF15 Punch head H2 Oil-dynamic hydraulic unit C1515 (3-part pump unit) Lower cylinder EI09 Double rotating punch P2R36 Water-air cooling unit R121 Refrigerant R407C Software RIO Control and management system MMACHNT-MICROMach Processor PENTIUM INTEL II 400 Mhz WINDOWS NT Documentation The height and weight of the asset must be taken into account when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and for each day or part thereof will be charged. The fee must be paid before collection. The sale is made with the exclusion of any guarantee or warranty. The information on the technical data comes from the original offer. No liability is accepted for typing or measurement errors. In case of doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: new, Year of construction: 2025, Oven for the powder paint shop powered by natural gas. The furnace is designed for the polymerization of powder paint. It is equipped with the latest heat exchanger made entirely of stainless steel AISI 1.4301, characterized by very high efficiency. Working dimensions (mm): 1500 (W) x 9000 (D) x 2200 (H) Technical data: • Power supply 400V 50Hz • 2 x Riello 90kW burners Hjdpfxjfktipe Aitenu • Operating temperature 210C • Maximum temperature 230C •High-class thermal insulation 150mm •Baffle in the middle of the stove allowing 50/50 Equipment: • upper transport, • Hot air circulation (Equal temperature throughout the furnace, acceleration of the heating process of details), • Safe opening and closing locks, • timer module, • Thermoregulator (controls the temperature inside and maintains it at the right level), • The stove is equipped with rails for easy transport. Cbauevig73 pvxg CHOOSE BUMEX SP. Z O.O. Very high quality of machines offered on the market. Professional advice and service. Guarantee. Warranty and post-warranty service. Full technical documentation. 100% satisfaction of our customers. All BUMEX SP. Z O.O. are WE certified. We offer our own transport - prices are set each time for a given offer. We issue VAT invoices. Short lead times! Possibility to order machines in various, personalized configurations and dimensions! Feel free to contact us.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, sheet thickness (max.): 3 mm, working length: 2,500 mm, TECHNICAL DETAILS Sheet thickness with tensile strength of 410 N/mm² max.: 2.00 mm Hnodpfx Aezv Rc Seitju Sheet thickness with tensile strength of 600 N/mm² max.: 1.25 mm Sheet thickness with tensile strength of 265 N/mm² max.: 3.00 mm Minimum sheet thickness: 0.50 mm Length of the notched plate at the inlet max.: 2,700 mm Width of the notched plate at the inlet max.: 1,500 mm Rotatable diagonal of the notched plate max.: 2,700 mm Bending length max.: 2,500 mm Clearance for bending above the work table max.: 127 mm MACHINE DETAILS Processor: Intel Pentium III, 500 MHz RAM: 128 MB SDRAM Graphics memory: 4 MB SGRAM Hard disk capacity: 9.1 GB CD-ROM drive: 600 MB Floppy disk drive: 3.5 inch, 1.44 MB Network cards: 2 Screen diagonal: 17 inches Voltage: 400 V Frequency: 50 Hz Number of phases: 3 Rated power: 38 kW Rated current: 64 A Switching capacity of the main switch: 40 kA Further technical details can be found in the attached documents.

Condition: excellent (used), Year of construction: 2008, operating hours: 86,100 h, functionality: fully functional, machine/vehicle number: 992793, type of input current: three-phase, overall weight: 22,000 kg, space requirement length: 9,500 mm, space requirement height: 3,000 mm, space requirement width: 9,100 mm, total length: 9,500 mm, total height: 2,300 mm, total width: 9,100 mm, For sale is a complete, automated Salvagnini P4 press brake system with a robot for the automatic stacking of manufactured sheet metal parts, 3 pallet positions, and an integrated conveyor system. This system is ideally suited for efficient and automated sheet metal manufacturing, enabling the processing and subsequent sorting or stacking of the manufactured components with minimal manual effort. Equipment: Salvagnini P4 press brake Hsdpjzxhgyjfx Aitenu Automatic bending/edging of sheet metal parts Robot for automatic stacking of finished workpieces 3 pallet positions for flexible storage and sorting Integrated conveyor system for automated material and part transport High degree of automation Efficient manufacturing with reduced manual handling High repeatability and reproducible manufacturing quality Ideal for series production as well as flexible small-batch production Bending length: 1916 mm The bending die was renewed in mid-2024. The robot’s suction frame (OPA16S) was renewed in 2025. The combination of the P4 press brake, automatic stacking, three pallet positions, and conveyor system offers a powerful complete solution for automated sheet metal processing. Machine: Salvagnini P4 Equipment: Robot stacking / 3 pallet positions / conveyor system Year of manufacture: 2008 Operating hours: 86,100 Condition: used – very good Location: 54576 Hillesheim Inspection and test run possible by arrangement. The machine is currently still in use in production. If required, a video of the machine during production can be sent. Price and further technical details upon request.

Condition: excellent (used), Year of construction: 2009, Hwacheon Cutex 160, Year 2009 CNC Control Fanuc OT i 12-station turret LNS bar feeder (max. bar diameter 42 mm) Tool package (including driven tool holders) Chip conveyor Tailstock Technical data: Swing diameter over bed: 550 mm Max. turning diameter: 300 mm Hsdpfx Aisyc Nryetjnu Max. turning length: 300 mm X-axis travel: 170 mm Z-axis travel: 335 mm C-axis Max. bar capacity: 45 mm Spindle speed: 6000 rpm Turret: 12 stations Rapid traverse X: 36 m/min Rapid traverse Z: 36 m/min Drive power: 20 kW Machine weight approx.: 3200 kg

Condition: excellent (used), Year of construction: 2018, operating hours: 34,000 h, functionality: fully functional, Great opportunity! Like-new Salvagnini S4 / P4 from the first owner, built in 2018! The machine is in perfect, like-new condition and ready for immediate use! The system has been regularly serviced by Salvagnini, and the machine is covered by a maintenance contract. Technical data and Salvagnini internal number: Punching machine/shear with rotating station S4Xe.30 consisting of: Conveyor belt TAC30.L2000 Corner turning device DA30 Punching machine S4Xe.30 Punch head H3 Oil-dynamic hydraulic unit HU22E Control and management of the SiX system Right-angle shear CS5S Turning device DF Lower cylinder EI09 Embossing unit BU30 Double rotating punch P2R3132 Double rotating punch P2R3334 Threading roll unit ME35 Device for automatic application of self-adhesive labels LBC (label printer) Portal robot MC30 Conveyor with brushes CTS30 Shear lift table TCV3015 Water-air cooling unit R81E Tools (detailed list available on request) P4Xe-3125 Swivel bending machine including roller and turning station consisting of: Shear lift table TCV3015.CT.RPC Feeder-destacker device PCD3015 Turning device RIP3015 Bending center P4Xe-3125 Upper bending die LS Lower bending die LI Hodpfxjzh I Iij Aitjnu Programmable clamping device U1 Standard clamping foot NS Control and management of the SiX system Work surface with balls SFE Device for cleaning and lubricating the bending dies PSE Asymmetrical control for auxiliary bending tools for positive bends CLA-A CLA tool set with "swan neck profile" UCE1500G38 Asymmetrical control for auxiliary bending tools for negative bends CLA-N-A CLA tool set with "swan neck profile" for negative bends UCE1500NG38 Device for V-notch RSU.UR-4 Swiveling device for auxiliary tools T Option for cutting and dispensing profiles CUT.SPC31 T-tool for 90° bends UTZ2 Delivery device/buffer for panels SAP34.POS The system has a hinged belt conveyor for central disposal of the sheet metal sections. These are then conveyed to tipping containers via a swan neck conveyor. Sorting according to stainless steel, aluminum, and black sheet metal is fully automatic. A weighing and level measuring device is integrated and reports the level via the control system. The machine can be inspected and tested by arrangement. Additional videos and detailed images of the system are available on request!

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1998, operating hours: 4,624 h, control type: CNC control, sheet thickness steel (max.): 2 mm, year of last overhaul: 2012, No minimum price – guaranteed sale to the highest bidder! A complete overhaul was carried out by Salvagnini in 2012! TECHNICAL DETAILS Maximum infeed length: 1,850 mm Maximum infeed width: 1,500 mm Maximum outfeed width: 1,500 mm Minimum length: 285 mm Minimum width: 190 mm Maximum diagonal: 2,150 mm Maximum reference dimension: 2,000 mm Hnodpfx Aezb H Txjitsu Minimum sheet thickness: 0.50 mm Sheet thickness, construction steel (max. 410 N/mm²): 2.00 mm Sheet thickness, stainless steel (max. 600 N/mm²): 1.25 mm Processing of pre-coated material: 3.00 mm Maximum tool length for CLA option: 1,000 mm MACHINE DETAILS Control type: CNC control Operating hours: 4,625 h EQUIPMENT LS Upper bending blade LI Lower bending blade Manual sheet support length adjustment CLA Long flange bending unit HP12015 R81 Cooling unit

Condition: used, Year of construction: 1994, Technical details: saw blade diameter: 450 mm revolution per minute: 2820 U/min Hjdpfou Nigkox Aitonu cutting lenght max.: 5000 mm cutting length min.: 240 mm air pressure - required: 6-8 bar hole of sawblade: 32 mm mitter cutting - both sides: 45+90 ° air-pressure connection: 6 - 8 bar total power requirement: ca. 4,6 kW weight of the machine ca.: 1,1 t dimension machine xH: 6,05x1,49x1,79 m Further features of the machine: - Pneumatic vertical and horizontal tension - pneumatic mist spraying device - height adjustable machine feet - material supports movable with saw - piece counter Cutting diameter according to tabular cutting range diagram, as dependent on speed and saw blade. Accessories: - 2 spare saw blades Machine can be demonstrated under power. i.D. *

Condition: excellent (used), Year of construction: 2001, sheet thickness (max.): 2 mm, sheet thickness steel (max.): 2 mm, working width: 1,850 mm, working range: 1,850 mm, 1 Used Salvagnini cnc automatic panel bender for sale cnc folder P4.1812 Servo-controlled panel bender LS Upper bending blade LI Lower Bending blade MLA.ZR Manual length Adjustment of Blankholder CLA Long Tab Bending Unit HP12015 R81 Chiller Max. length at entrance: 1850mm. Max. width at entrance: 1500mm. Minimum length at entrance: 285mm. Minimum width at entrance: 190mm. Maximum diagonal: 2150mm. Maximum width at exit: 1500mm. Hjdpfswb E Uvjx Aitjnu Maximum reference dimension: 2000mm. Minimum sheet thickness: S min: 0,50mm. Maximum sheet thickness, Mild Steel (max. 410 N/mm2): Max: 2,00mm Maximum sheet thickness, Stainless steel (max. 600 N/mm2): Max. = 1.25mm Processing of pre-painted material Smax= 3,00mm. Maximum tool length for CLA option: 1000mm.

Condition: not inspected (used), Year of construction: 2008, operating hours: 32,164 h, functionality: unexamined, machine/vehicle number: 3201250, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 3 mm, workpiece length (max.): 2,695 mm, workpiece width (max.): 1,524 mm, No minimum price – guaranteed sale to the highest bidder! Hnodpfx Aieycqucetou Placing a bid obligates you to collect the item between 23/03/2026 and 27/03/2026! The machine is also equipped with a cutting function (see pictures)! TECHNICAL DETAILS Maximum tensile strength stainless steel: 600 N/mm² Sheet thickness stainless steel: 0.5 mm – 1.25 mm Typical sheet thickness stainless steel: 1.0 mm Maximum tensile strength steel: 410 N/mm² Sheet thickness steel: 0.5 mm – 2.0 mm Typical sheet thickness steel: 1.5 mm Maximum tensile strength aluminium: 265 N/mm² Sheet thickness aluminium: 0.5 mm – 3.0 mm Typical sheet thickness aluminium: 1.5 mm Sheet dimensions Length: 405 mm – 2,695 mm Width: 190 mm – 1,524 mm Maximum diagonal: 2,800 mm Maximum centering dimension: 2,500 mm MACHINE DETAILS Hydraulic System Base machine oil capacity: approx. 500 dm³ Shear lift table oil capacity: approx. 20 dm³ Cooling System (Closed) Cooling unit R81: approx. 175 liters Cooling unit R101: approx. 260 liters Service Connections Mains voltage: 400 V Frequency: 50/60 Hz Connection cross-section: 4 × 25 mm² Pre-fuse: 80 A Average current: 42 A Power consumption: 24 kW Control voltage: 24 V AC/DC Industrial PC / Monitor / Power supply units: 220 V AC Open Cooling System Cooling water requirement: approx. 2.0 m³/h Max. inlet temperature: 20 °C Compressed Air Required pressure: 6 – 12 bar Max. air consumption at 6 bar: approx. 2,275 Nl/min Dimensions & Weight Required space (L × W × H): approx. 18,000 × 11,500 × 3,500 mm Transport width: Up to approx. 3,000 mm Total weight (without oil): approx. 27,760 kg Heaviest component (bending machine): approx. 20,040 kg Operating hours: 32,164 h Robot Manufacturer: KUKA Model: KR 150 L110-2 2000 Year of manufacture: 2008 Weight: 1,285 kg Note: Robot has been modified for use with a magnetic lifter SCOPE OF DELIVERY Available manuals Various spare parts in wooden crates

Condition: used, TECHNICAL DETAILS - Number of spindles : 2 - Number of axes : 4 MAIN SPINDLE - Spindle nose : A2-8 - Spindle speeds : 3000 [rpm] - Max. bar diameter : 80 [mm] - Max. turning diameter : 300 [mm] - Max. diameter on bench : 520 [mm] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Spindle speeds : 6000 [rpm] - Max. bar diameter : 53 [mm] - C axis indexing precision : 0.001 [°] - Travel : 520 [mm] TURRET - Number of positions : 12 - X/Z stroke : 230 / 460 [mm] Hnjdpfeuhbnnex Aiteu - Live tools speed : 4500 [rpm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 22.5 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3050 x 1860 [mm] - Machine height : 1.850 [mm] - Machine weight : 5500 [kg] EQUIPMENT - CNC : OSP-P300L-R - Coolant tank * with high-pressure pump - Chips conveyor - Parts catcher - Parts conveying strip - Bar loader : Top Automation FU352 - Fire extinguisher * * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer.

Condition: excellent (used), Year of construction: 2010, operating hours: 18,502 h, functionality: fully functional, machine/vehicle number: 3201379, type of input current: AC, sheet thickness (max.): 2 mm, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 3 mm, overall weight: 40,000 kg, total length: 2,550 mm, total height: 1,090 mm, total width: 1,500 mm, Our Salvagnini P4X-2516 Panel Bender is a fully automatic, high-performance panel bending system designed to streamline sheet metal production with maximum efficiency and precision. It integrates automated loading, feeding, bending, and unloading into a single continuous process, minimizing manual handling and ensuring consistent output quality. The machine features adaptive bending technology with real-time sheet thickness measurement, allowing automatic adjustment of bending parameters for optimal accuracy. Equipped with an advanced SiX control system and intelligent software, it enables flexible production scheduling and program management. The inclusion of an automatic blankholder (ABA) and auxiliary bending tools (CLA) allows complex and multi-stage bending operations without manual setup, while the rotating manipulator enables multi-side bending in a single cycle. Max. sheet length: 3,048 mm Max. sheet width: 1,524 mm Max. bending length: 2,500 mm Sheet thickness (steel ~410 MPa): 2.5 mm (90°) Sheet thickness (stainless steel ~580 MPa): 2.1 mm (90°) Sheet thickness (aluminium ~265 MPa): 3.2 mm (90°) Max. bending angle: +135° / -135° Max. flange height: 165 mm Max. diagonal (rotatable sheet): 2,800 mm Min. sheet thickness: 0.5 mm Max. pack height (incl. pallet): 350 mm Max. load capacity: 5,000 kg Vertical stroke (loading table): 550 mm Rotation capability: 0°, 90°, 180°, 270° Automatic loading system with scissor lift table () Conveyor–destacker (PCD3015) for automatic feeding Automatic panel bending center P4X-2516 Upper bending blade (LS1) Hodpfxoyr Ackj Aitonu Lower bending blade (LI) SiX CNC control system SOLE.P4 production management software OFFICE.P4 offline programming software ABA automatic blankholder (automatic length adjustment) CLA-A asymmetric auxiliary bending system UC1000-G13 gooseneck tool set Eroded clamp (for coated / special materials) PSE automatic cleaning & lubrication system SAP panel unloader / accumulator Spare parts kit (approx. €7,000 value)

Condition: ready for operation (used), Year of construction: 2004, operating hours: 40,000 h, functionality: fully functional, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 3 mm, working width: 2,780 mm, working height: 1,090 mm, TECHNICAL DETAILS Max. sheet length: 2,780 mm Max. sheet width: 1,500 mm Hsdpfx Aoxxp Ekeitsnu Max. bending length: 2,550 mm Sheet thickness (stainless steel): 2.5 mm Max. flange height: 185 mm Sheet thickness (aluminium): 3.0 mm Max. bending angle: ± 135° Working height: 1,090 mm MACHINE DETAILS Dimensions & Weight Dimensions: 12,500 x 7,400 x 2,600 mm Approximate machine weight: 19,000 kg Total power requirement: 43 kW Operating hours: 40,000 h EQUIPMENT Automatic/manual loading via PCD Automatic loading system with lift table Automatic bending center P4-2516 Automatic tool setup ALA, symmetrical CLA Semi-automatic unloading of finished parts via SAP

Condition: excellent (used), functionality: fully functional, machine/vehicle number: NT2000, total height: 4,300 mm, total width: 3,300 mm, total length: 2,980 mm, load capacity per storage section: 250 kg, construction height: 435,000 mm, input voltage: 415 V, warranty duration: 12 months, load capacity: 250 kg, Equipment: documentation/manual, safety light barrier, Kardex 500 Shuttle NT2000 1 Available 415v 3 phase netural & Earth 16 amps into an isolator required Colour Blue & Grey Max load per tray 250Kg Number of trays 20 per machine Hsdpforgqxmjx Aitjnu Machine Dimensions 4300mm Height x 3300mm Width x 2980mm depth Tray Dimensions 3000mm width x 860mm depth Delivery, installation & 12 months warranty available Supply only available without warranty Service & Maintenance contracts available for these machines