Pillar drilling machine

Rogi RDP20V

Condition: new, Cutting range: round 0°: 170 mm square 0°: 150 x 150 mm flat 0°: 150 x 190 mm round 45°: 125 mm square 45°: 95 x 120 mm working height : 870 mm cutting speeds : 40 / 80 m/min saw band: 2080 x 20 x 0,9 mm coolant pump: 100 W saw motor: 0,75 kW connection: 400 V dimensions L x W x H, approx.: 1340 x 810 x 1320 mm Weight, approx.: 146 kg Features: - Saw bow can be tilted up to 45°. - With 2 saw blade speeds for optimum adaptation to the workpiece - Ideal for cutting tubes, profile material as well as solid material made of VA, iron, etc. - Generously dimensioned saw arm for low-vibration work - Lowering of the saw arm via hydraulic lowering cylinder - Low noise level due to stable design - Switch-off after end of cut by micro limit switch - Quick-action vice for simple and fast workpiece clamping - Precise, adjustable saw blade guide for optimum cutting results - Coolant system with pump - Incl. base frame - CE/IEC, German documentation and German service Scope of delivery: - BiMetal saw band 2080 x 20 x 0.9 mm, 6/10 ZpZ Rsdoilk H Tepfx Ahzobt - Band tension adjustable via manometer - quick clamping vice - material stop - Coolant device with pump - Hydraulic lowering cylinder - Motor protection switch - Automatic limit stop after end of cut - underframe

Condition: new, Year of construction: 2022, Power: 1,1kW Drilling capacity steel / continuous drilling capacity: 30mm / 25mm diameter Speed range: 120 - 1810 rpm Speed steps: 9 Spindle mounting: MK-4 Drilling stroke: 120 mm spindle throat: 254 mm table size: 475 mm x 425mm Drilling table lateral tilting / rotating: 45° left / 360°. Redpogulr Hsfx Ahzsbt column diameter: 80 mm Quick chuck: 1 - 16 mm Weight: 132 kg

Condition: new, saw blade diameter 315/350 mm Rbedsd Iin Tjpfx Ahzet capacity 90 degrees: round 125 mm capacity 90 degrees: square 110 mm capacity 90 degrees: flat 160x90 mm capacity 45 degrees: round 105 mm capacity 45 degrees: square 90 mm capacity 60 degrees: flat 80x100 mm total power requirement 1,8/2,5 kW weight of the machine ca. 0,2 t dimensions of the machine ca. 0,6 x 1,22 x 1,06 m The large workshop saw with sophisticated technology. (20070) • For miter cuts right and left up to 45°, end stop at 90° and at 45° left • For sawing steel, stainless steel, and, to a limited extent, aluminum profiles • Vice with quick-release lever, longitudinally adjustable clamping jaw, adjustable guide, and double clamping arm for burr-free cuts • Conical safety clutch made of hardened steel to protect the saw blades. • Large base plate made of solid cast iron for maximum stability and low-vibration sawing • 2 speeds: 30 + 60 rpm • Powerful special gear with elastic clutch for heavy-duty use • Automatic cooling directly on the saw blade • Saw head with double bearings • 24 V safety switch in the handle with restart lock • Length stop, assembly tool ATTENTION: Price does not include saw blade!!!

Condition: new, Column drilling machine Make: ALZMETALL Model: AX 3 iTRONIC-V Year of manufacture: 2023 Condition: New machine Speed 80 - 1.125 rpm. standard equipped with: - 7" TFT - LCD display with touch function: Manual input spindle speed setpoint, Speed display actual value, Integrated drilling depth display with Touch zero point transfer, Virtual drilling depth scale in the display, Machine status displays and warnings in display, service information, Selectable operator language: DE/EN/FR/ES/IT/NL/RU. - Thread cutting device - Speed adjustment, stepless, by means of lever Rbjdpjh I N Trjfx Ahzot - Speed display, digital - Three separate buttons for clockwise rotation - counterclockwise rotation - stop - clockwise and counter-clockwise rotation via contactor control - automatic drill feed with feed overload protection - spindle protection - operating instructions other important technical data: - 40 mm drilling capacity in ST 60 - 120 mm quill stroke - spindle cone MK 3 - 115 mm column diameter - feed rate 0,1 + 0,2 mm/rev - 1,45 / 1,9 kW Motor power - 515 x 360 mm Table dimension with the following options: - LED machine light - foot switch, complementary to the threading device - Technology calculator in the display - Drilling depth fine adjustment and fixed stop

Condition: good (used), Centre height: 195 mm Distance between centres: 1250 mm Max. swing diameter over bed/cross slide: 400/265 mm Spindle mount/bore: Camlock D1-6"/54 mm Tailstock quill taper: MT 5 Spindle speeds steplessly adjustable in 3 ranges: 0 - 2500 rpm Longitudinal feeds: 0.018 - 1.2 mm/rev Cross feeds: 1/2 of longitudinal feeds 51 metric thread pitches: 0.2 - 14 mm 56 imperial (inch) threads: 2 - 56 TPI 20 module threads: 0.2 - 3.5 module 20 diametral pitch threads: 8 - 56 DP Electrical connection: 400 V, 7.5 kW Weight: 1500 kg Rbjdpfxsxlg Dws Ahzot Space requirement: 2500 x 1300 x 1300 mm

Condition: new, ROGI SAW MACHINE TYPE CY355 INVERTER VARIO SPEED SEMI-AUTOMATIC Sawing dimensions ----- 3770 x 34 x 1.1 mm Cutting speeds ----- variable 20-80 M/min. Motor Power ----- 2.2 KW - 400V - 3 Phase Weight ----- 855 KG Cutting capacity 90 ----- 355 mm / 490 x 300 mm Cutting capacity 60 ----- 230 mm / 180 x 220 mm Cutting capacity 45 ----- 350 mm / 290 x 340 mm Cutting capacity -45 ----- 290 mm / 250 x 250 mm INCLUDED Saw band Workpiece stop Pedestal Pressure gauge for sawbelt tension Saw band guide with carbide inserts Hydraulic quick-clamp Cooling pump Hydraulic bag cylinder Rsdpfx Aega Tzxshzsbt Motor protection switch Automatic end stop

Condition: used, TIG Welding Machine MESSER GRIESHEIM Type Combitig GW 23 AC/DC The machine only operates with direct current welding and contact ignition Serial No. 445276 Year of manufacture: approx. 1990 Output: 230 Amps = 35% duty cycle 180 Amps = 60% duty cycle 140 Amps = 100% duty cycle Infinitely variable setting range Rbsdpfjdzqa Isx Ahzot Current type: DC Mains connection: 400 V, 50 Hz, 32 A plug - 2-stroke / 4-stroke welding mode - DC welding with contact ignition works - AC welding and high-frequency ignition do not work - 7 meter hose package with hand torch - Connection plug for remote potentiometer (foot pedal) – foot pedal not included - Air-cooled - Gas pressure regulator Required space (L x W x H): 850 x 480 x 600 mm Weight: approx. 90 kg The welding test shows good results when welding stainless steel with DC; the HF ignition does not work, but the arc can be ignited via brief contact. When welding aluminum with AC, no arc is formed.

Condition: good (used), Year of construction: 1986, Offer 23389 Rodpfx Aorckv Hshzjbt Technical data: - Drilling capacity in steel ST 60 30 mm - Drill spindle holder MK 3 - 4 feeds 0.1 - 0.16 - 0.25 - 0.4 mm/rev - Drill spindle speeds in gear stages 95 - 2000 rpm - Drill spindle stroke 160 mm - throat depth 350 mm - Table with 3 T-slots height-adjustable 340 x 320 mm - Table can be tilted left + right - max. distance table - drill spindle 500 mm - max . Distance machined base plate - drill spindle 1050 mm - Column diameter 160 mm - Coolant device - Lighting system - Drive 400 V / 2.4 kW - Space requirement approx. W 600 x H 1950 x D 800 mm - Weight approx. 350 kg

Condition: used, L-TEC Inverter TIG Welding Machine Type Inverter TIG 200 DC TIG welding machine for direct current (DC) Serial No. 184548 Year of manufacture: approx. 1994 Rsdpfx Ahodzqb Eezsbt Output: 200 amps = 60% duty cycle 155 amps = 100% duty cycle Adjustment range: infinitely variable Current type: DC (direct current) Mains connection: 400 Volt, 50 Hz, 32 Amp plug - 4-meter hose package with central connection and hand torch - with remote potentiometer (foot switch) - gas pressure regulator - DC only - HF ignition Space required (L x W x H): 850 x 480 x 740 mm Weight: approx. 150 kg The welding test shows very good results when welding stainless steel with direct current. Overall in good condition.

Condition: good (used), Year of construction: 1986, machine/vehicle number: 23036, Offer 23380 Technical data: Rbodorckw Ispfx Ahzet - Drilling capacity in steel ST 60 30 mm - Drill spindle holder MK 3 - 4 feeds 0.1 - 0.16 - 0.25 - 0.4 mm/rev - Drill spindle speeds in gear stages 95 - 2000 rpm - Drill spindle stroke 160 mm - throat depth 350 mm - Table with 3 T-slots height-adjustable 340 x 320 mm - Table can be tilted left + right - max. distance table - drill spindle 500 mm - max. distance machined base plate - drilling spindle 1050 mm - Column diameter 160 mm - Lighting system - Drive 400 V / 2.4 kW - Space requirement approx. W 600 x H 1950 x D 800 mm - Weight approx. 350 kg