Sliding table saw format

REMA Fx400 2osie 6kW / 1300 elektryczna

Condition: good (used), Year of construction: 1990, CNC Cylindrical Grinding Machine Make: TSCHUDIN Type: HTG 22 - 862 Year 1990 with MARPOSS E14 control and measuring control E5. center width : 650 mm center height : 100 mm grinding length : 620 mm Weight : ca.4 500 Kg. Further data See : TECHNICAL DATA SHEET With many grinding stones and holders Complete machine documentation available. Machine in stock. Isdpjid Aphjfx Adnja

Condition: excellent (used), Year of construction: 2016, Takisawa TMM 250 3 turn-mill center, year 2016, Fanuc turning length:1300 Turning diameter: 350 mm Spindle speed (max.): 4000 1/min Iodpfxert Ip No Adnja 9 axes 2 x spindles 2 x C-axis Swing diameter 780 mm Turning diameter max. 350 mm Turning length max. 1,300 mm Chuck diameter left 250 mm Chuck diameter right 200 mm Upper tool carrier with Y-axis 260 mm and B-axis 230° / +/- 115° Complete with 30-position tool changer Lower tool carrier 15-position turret - all positions driven Complete simultaneous 5-axis machining with turning/milling support. Tool changer with 30 tool positions Workpiece magazine, to the right of the machine, with gantry handling Driven tools on the turret. C-axis for left and right spindle Chip conveyor Internal coolant supply through milling spindle 20 bar Due to high office costs (customs regulations) we do not deliver to Turkey Turkey, Iran, Russia and Belarus.

Condition: new, Year of construction: 2024, Saw Saw blade rotation speed 3000 / 4000 / 5000 RPM Diameter saw blade and bore 300 – 400 mm, 30 mm Sawblade tilting 90° – 45° Cutting depth at 90° / 45° 125 mm / 90 mm Cutting width parallel fence, version Z400 M, Z400 EL 1350 mm (option 1000 / 1525 mm) Cutting width parallel fence, version Z400 X1, Z400 X3 1250 (option 1500 mm) Cutting length 3500 mm (option 2500 mm / 4100 mm) Dimensions cast iron table 985 mm x 710 mm Dimensions sliding table 3200 (option 2200 mm / 3800) mm x 420 mm Dimensions cross-cut table 1420 mm x 650 mm Length of swiveling cross-cut fence 2295 mm (telescopic 3000 mm) Scoring unit Diameter scoring blade and bore 120 mm, 20 mm Cutting depth with 120 mm diameter blade 3,5 mm Scoring blade rotation speed 8200 RPM Scoring saw motor power 1,3 kW / 2 hp (S6) Weight 850 kg (Z400 – 3200) – 1080 kg (Z400 X3 – 3800) Voltage 400 V 3 phase (option 230 V 3 phase) Motor power (3 phase) 7 kW /9,5 hp (S6), option 9,2 kW / 14 hp (S6) Isdpfjglfv Sex Adnsa

Year of construction: 1990, condition: good (used), CNC-4th axis NIKKEN type: CNC-200 year 1990 Iodpfx Aogabu Uodnja with counterholder and base plate.

Condition: good (used), Year of construction: 2008, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, working range: 2,500 mm, Equipment: cooling unit, TRUMPF TruLaser 2525 - 4 kw (formerly Trumatic L 2530) Working area: 2,500 x 1,250 x 115 mm Control: Siemens Sinumerik 840 D Laser power: 4,000 watts Max. Sheet thickness mild steel: 20 mm Max. Sheet thickness stainless steel: 15 mm Max. Sheet thickness aluminum: 10 mm STANDARD EQUIPMENT: - Closed machine frame with integrated laser unit - TFT color screen - Position laser diode - Motion unit for high-precision processing - Additional highly dynamic Yp axis - Drives with maintenance-free three-phase servomotors - Closed beam guidance - Conveyor for small parts and waste - NitroLine - FlyLine Ijdpfx Adorwlwnonoa - Piercing end detection TRUMPF LASER: - CO2 laser TruFlow 3200 - High frequency excitation - Maintenance-friendly turbo radial blower - Gas mixer (integrated) - Laser power control - Laser logbook function CUTTING HEAD: - Laser cutting head with 5" lens - Laser cutting head with 7.5" lens - Universal quick-change device - ControlLine CONTROL: - SIEMENS Sinumerik 840D control system - Automatic switch-off - ContourLine - SprintLine - Teleservice - Microweld - RJ45 network connection - 3.5" floppy disk drive - Network connection via telediagnosis SAFETY: - CE marking - Light barriers - Multi-chamber extraction system - Compact dust extraction system - Workshop programming EXTENDED EQUIPMENT: - More powerful TruFlow 4000 laser - Automatic pallet changer

Condition: used, Year of construction: 2015, machine/vehicle number: 5319, travel distance X-axis: 8,000 mm, travel distance Y-axis: 2,600 mm, travel distance Z-axis: 1,300 mm, BASIC MACHINE PowerSpeed 5 WITH FORK HEAD – KEY TECHNICAL DATA Travels: X-axis: 8,000 mm Ijdpfxswdub De Adnja Y-axis: 2,600 mm Z-axis: 1,300 mm Machine bed (X-axis): Flat-bed design with 1,000 mm guideway width. Two electric motors drive via a centrally bolted rack. Hardened compact roller guides ensure high precision. Machine base (Y-axis): Welded steel construction with 900 mm guideway width. Two liquid-cooled feed motors and two measuring systems ensure dynamic performance and accuracy. Protected by telescopic steel covers. Headstock slide and headstock: Made of GGG 60 cast iron, guided by compact roller guides. Optimal power transmission thanks to long guideways and close arrangement of the Y and Z axes. Dual-spindle drive: Two vertical ball screws with separate drives and measuring systems for high dynamics and long-term accuracy. Drive system: Individual digital drives with AC motors. Feed and rapid traverse range: 2–30,000 mm/min. Acceleration: 3.5 m/s². Measuring system: Direct, non-contact linear measuring systems for high manufacturing accuracy. Automatic 2-axis yoke head with motor spindle: A-axis: 764 Nm (100% duty cycle), ±105°, clamping torque 2,160 Nm, accuracy ±5″ C-axis: 810 Nm (100% duty cycle), ±200°, clamping torque 3,024 Nm, accuracy ±3″ Motor spindle: HSK-A 63, up to 18,000 rpm, 89 Nm (100% duty cycle), internal/external coolant supply up to 70/20 bar, liquid-cooled Electrical equipment: 400/230V, 50Hz, 80kVA power rating. Control cabinet (IP54) with control and switching devices. Machine-to-cabinet cable length: 5m. Control cabinet cooling: Two-chamber system with automatic internal air cooling and dehumidification. Lubrication: Centralized lubrication for guides, permanent grease lubrication for the main spindle, oil mist lubrication in the milling head. Power supply: Compressed air 4–6 bar, G 1/4 connection, with filter pressure regulator and condensate separator. Control: Siemens 840D sl with swiveling control panel. Wireless handwheel with LCD display, potentiometers, and buttons for axes, feed, and spindle. Remote maintenance: Fault diagnosis via alarm manager, notification via email/SMS (SIM card and network required). TightBlock base frame (X = 8,000 mm): Solid composite construction for damping. Foundation recommendation: ≥100 mm thickness per 1,000 mm of X-travel, structurally tested. Coolant system: 500 l tank, filter system

Condition: used, Year of construction: 1998, x-travel 6000 mm y-travel 4000 mm z-travel 1250 mm w-axis 1500 mm Iodpfeu I E Emox Adnja Control Fidia max. workpiece weight 60000 kg Control unit for tool magazine/tool changer Siemens turning speeds 6,3 - 4000 U/min surface area 2500 x 4500 mm 48 St. tool taper SK50 daylight between the side columns 3700 mm rapid traverse 30000 m/min total power requirement 63 kW weight of the machine ca. 150 t required space 16,8 x 10,3 x 7,9 m

Condition: used, Year of construction: 1996, Carriage length: 2800 mm, anodized version (new carriage), 7.5 kW motor, automatic contactor control, digital speed display, cutting width 1000 mm, table extension 800 mm, without feed !!!! Location: Nattheim Iodpfew Sy Tgjx Adnja

Condition: new, Year of construction: 2025, Universal 5-in-1 Multifunction Machine - CMS260 is a tool that has gained recognition in the European market. We guarantee that this machine complies with safety and technological regulations. Here is a comprehensive description of this machine distribution: Advanced Technological Solutions: CMS260 combines high-quality construction with advanced technological software, designed for various woodworking applications. Compliance with Safety Standards: The machine meets all requirements regarding European Union and Polish safety regulations. It’s not just about performance, but above all, user safety. Technical Start-Up Documentation (TSD) in Polish: It includes access to full technical documentation, which makes operating and maintaining the machine easier. Authentic CE Declaration of Conformity: The CMS260 holds a genuine CE declaration of conformity, a certificate issued by authorized certification bodies within the European Union to verify compliance with European safety standards. Multifunctionality in Small Spaces: Despite its versatility, the machine performs well even in limited spaces, thanks to its smart design and compact dimensions. Precise Triple Cutter Shaft and Aluminum Sliding Table: The triple cutter shaft with HSS blades and aluminum sliding table with a triangular guide ensure precision and power during operations. Three Motors for Maximum Performance: The CMS260 features three motors as standard, providing significant power, especially during heavy-duty operations. Integrated User-Friendly Elements: The machine includes foldable planer tables for faster conversion to thickness planer mode, manual adjustment of the saw blade tilt up to 45°, and a clear electrical panel. Foldable Chip Collector Hood and Stable Planing Stop: The integrated foldable chip collector hood extends 100 mm, and the planing stop can be adjusted from 90° to 45°, improving workspace safety and efficiency. DRILLING ATTACHMENT (ADDITIONAL COST) Horizontal Drilling Machine: Drilling and chiseling are tasks easily mechanized. Chiseling head that can be raised and lowered Table adjustable in two axes Adjustable length stop Two lower clamps and one side clamp Technical Data: Circular Saw Table dimensions: 920 x 410 mm Max. saw blade diameter: 254 mm Saw blade spindle: 30 mm Rotational speed of the saw blade at 50 Hz: 4000 rpm Saw blade tilt angle: 0°-45° Max. cutting height at 45°: 63 mm Max. cutting height at 90°: 78 mm Motor power: 2.2 kW / 400V Planer / Thicknesser Drum diameter: 70 mm Number of knives: 3 pcs Iedpfev R Td Esx Adnsa Rotational speed of the cutting drum: 5500 rpm Feeding rollers: 32 mm Max. planing width: 260 mm Max. planing depth: 3 mm Workpiece angle adjustment: 0–45° Max. thicknessing width: 258 mm Max. thicknessing height: 225 mm Max. thicknessing depth: 4 mm Feed speed: 7 m/min Motor power: 2.2 kW / 400V Main table size: 920 x 410 mm Sliding table size: 238 x 1320 mm Dust extraction port diameter: 100 mm Milling Machine Spindle: 30 mm Spindle rotational speed: 1400/4000/6000/9000 rpm Spindle mounting length: 105 mm Max. spindle stroke: 110 mm Max. table hole: 160 mm Motor power: 1.5 kW / 400V Weight: 360 kg

Year of construction: 2022, condition: new, Altendorf WA 6 manual height adjustment, double roller carriage length 2000 mm scoring unit, swiveling, cantilever table, angular miter fence, automatic brake, lowerable below table height ----- Technical data ----- Swivel range: 0 - 45 °, cutting width at rip fence: 1.000 mm, max. cutting height: 87 mm, max. saw blade Ø: 315 mm, Swivel range miter fence: up to 49 °, Speeds: 4,200 rpm, Engine power main motor: 5.5 hp / 4 kW, motor power scoring motor: 0,5 hp / 0,37 kW, Working table height: 910 mm, suction nozzle Ø: 1 x 100 / 50 mm each, weight: 450 kg Iedpfeihahmex Adnsa Large suction hood Location: Ex stock 54634 Bitburg - immediately available - Location: Ex stock 54634 Bitburg - free on truck - - immediately available -