Punching machine

Raster RST 400-1000 DH

Condition: like new (used), Year of construction: 2022, operating hours: 13,116 h, Max. bar capacity mm: 20 Max. Z-axis travel (sliding headstock/fixed headstock) mm: 205 / 80 Max. spindle speed rpm: 10,000 Drive power 100%/40% duty cycle kW: 3.0 / 5.5 Torque 100%/40% duty cycle Nm: 5.73 / 10.5 / max. 17.2 C-axis resolution degrees: 0.001 Max. rapid traverse Z m/min: 20 Tool stations: 8 Driven tools: 8 Max. tool speed rpm: 12,000 / 8,000 Tool holder diameter mm: 45 Drive power 100%/40% duty cycle kW: 1.0 / 2.0 Turning tool cross-section mm: 16x16 / 20x20 Slide travel X mm: 120 / 165 Slide travel Y mm: ±25.4 Slide travel Z mm: 254 / 567.5 Rapid traverse X/Y/Z m/min: 20 / 20 / 40 B-axis swivel angle degrees: 105 Lower turret: Tool stations: 8 Driven tools: 8 Max. tool speed rpm: 12,000 Tool holder diameter mm: 45 Drive power 100%/40% duty cycle kW: 1.0 / 2.0 Turning tool cross-section mm: 16x16 / 20x20 Slide travel X mm: 120 Slide travel Y mm: ±25.4 Slide travel Z mm: 155 Rapid traverse X/Y/Z m/min: 20 / 20 / 40 Back working device: Tool stations: 4 Ffedpfx Afjwuddvsnst Slide travel X/Y/Z mm: 120 / ±25.4 / 155 Tool holder diameter mm: 25 Sub spindle: Max. spindle bore mm: 20 Max. spindle speed rpm: 10,000 Drive power 100%/40% duty cycle kW: 3.0 / 5.5 Torque 100%/40% duty cycle Nm: 5.73 / 10.5 / max. 17.2 Slide travel X mm: 235.5 Slide travel Z mm: 258 C-axis resolution degrees: 0.001 Rapid traverse X/Z m/min: 20 / 40 Coolant system basic unit: Pump pressure bar: 3 / 8 Tank capacity l: 250 Flow rate at 3 / 8 bar l/min: 80 / 120 Filtration degree µm: 200 Machine dimensions Length x width x height mm: see installation plan* Weight kg: 5,000* Connected load kW: 40 (47 kVA)

Condition: used, Year of construction: 2004, pressure 80 t stroke 16 - 63 mm no. of strokes 100 - 750 /min distance between columns 970 mm dayligth (stroke and adjustment up) 380 mm column travel -side 380 mm table surface area 940 x 910 mm hole in the table 770 x 190 mm table height over floor 1180 mm ram surface 940 x 510 mm ram adjustment 76 mm material width 203 mm material thickness - 6,0 mm feed length 0 - 120 mm Fedpfx Afsvuua Nsneft power requirement 37,0 kW Weight 14,50 t dimensions of the machine ca. 2,7 x 1,7 x 3,6 m permitted for automatic mode according to the CE-Norm with infinitely variable drive, pneumatic clutch/brake combination, semi-automatic stroke adjustment, motoric ram adjustment, fix table, circular oil lubrication mechanical roll feed Bruderer BBV 205/120 with drive via main shaft / pivot shaft of the press consoles Guethle CK A noise enclosure can be offered optionally - price on request

Year of construction: 2011, condition: reconditioned (used), Boschert tool grinding machine EASY SHARP Equipped for Trumpf tooling system (Amada system optional) Machine for punching tool maintenance with cooling system and especially powerful motor, therefore also suitable for use with diamond grinding wheels. Used machine is currently being overhauled Equipment for Trumpf tooling system up to size III Accessories: Tool holder for punch flat and whisper Die holders for size I, II and III New corundum grinding wheel Dressing diamond Cooling system and machine base revised Technical data: Grinding wheel diameter 175 mm height adjustment 150 mm working area 400 x 150 mm Ffedpfeid I T Isx Afnjt motor power 2,2 kW Motor speed 2825 rpm Optional adapter for Amada system available Pictures similar

Condition: excellent (used), Year of construction: 1981, functionality: fully functional, equipped with: 1 Right hand feeding system 1 Eccentricpress 250 kN Fedpfx Aer D N Eqjfneft 4 Standard slide unit 1 Narrow slide unit working range: wire diameter range: up to 6,0 mm stripmetal width: up to 80 mm feeding length: up to 520 mm output: 10 - 250/min

Condition: good (used), Year of construction: 2008, 1 used vertical machining center Manufacturer: Deckel Maho Model: DMU 80 monoblock Year of manufacture: 2008 Control: ITNC 530 Technical specifications X travel: 980 mm Y travel: 630 mm Z travel: 630 mm Ffsdpfxexa Euds Afnot Control: iTNC 530 Total power requirement: 10 / 15 kW Machine weight approx.: 9.5 t Space requirements approx.: 4*4*2.5 m Additional information Equipment: Electronic handwheel Operation mode 4 Manual swivel milling head Motor spindle 12,000 rpm SK 40 / Clamping DIN 69872 32-tool magazine Fixed table 1250 x 700 mm Chip conveyor Coolant system

Condition: as good as new (ex-display), Year of construction: 2017, operating hours: 132 h, functionality: fully functional, machine/vehicle number: 20731, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, rapid traverse X-axis: 90 m/min, rapid traverse Y-axis: 90 m/min, rapid traverse Z-axis: 90 m/min, nominal power (apparent): 35 kVA, controller manufacturer: Fanuc 31I, spindle speed (max.): 42,000 rpm, operating hours of spindle: 132 h, coolant supply: 20 bar, spindle motor power: 15 W, spindle nose: HSK E40, input voltage: 415 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, The Machine is in perfect condition. Machining accuracy is +/-0.0015mm. (measured with zeiss micura) The machine is equipped with Renishaw OMP400 and BLUM Pico for workpiece and tool measuring. Repeating accuracy is +/-0.001 High speed and high accuracy option on Fanuc. The Machine can be inspected under power. Fsdpfx Afovcfi Dsnjft

Condition: good (used), Make: OMERA Type: R4 / 12-2 Year: 1976 Table length : 1900 Table width : 1000 Steady arm throath HOR : 670 Steady arm throath VER: 940 Stroke cylinder : 350 Column diameter : 200 Specifications Metric US Standard There are no specifications for this machine (yet). Dimensions (Estimate) Length 3000 mm Width 2200 mm Height 2500 mm Weight 2800 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Ffjdekvnumepfx Afnst

Condition: excellent (used), Year of construction: 1999, grinding length: 1,000 mm, Internal / External spindel Collet device Schaublin with inserts Steady rest 5 - 80 mm Steady rest 3 - 120 mm Coolant system Filtration system Speeds head 1500 / 1700 / 2200  Centre height: 175mm Ffedpfjxy I Tvsx Afnet Grinding Ø: 350mm Grinding length: 1000mm Grinding stone dimensions:400 x 50 x 127mm Grinding stone speeds: 1500 / 1700 / 2200Rpm Table inclasement: 9° Tailstock: 4Mk Cooling system: Yes Filtration: Yes Length: 2860mm Width: 1680mm Height: 1670mm Weight: 2500kg

Condition: used, Year of construction: 1998, machine/vehicle number: 10870, Press capacity: 50 ton Ram stroke adjustable: 16 - 51 mm Slide adjustment: 64 mm Free frontal opening L-R: 1100 mm Free lateral opening F-B: 250 mm Table surface area : 1080 x 650 mm Slide area: 980 x 420 mm Hole in table: 1060 x 200 mm Number of strokes: 100 - 750 s.p.m. Fsdpfx Afsuqd Abjnsft Required power: 22 kW Working hours machine: 16850 h Height over floor approx.: 2471 x 1278 x 3150 mm Weight of machine approx.: 9 ton Standard configuration BRUDERER precision roller feed BBV 205 / 120

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 25.12.15, Fresan FP 100P - C Frame Eccentric Press - 100 Tons (1000kN) TECHNICAL DATA: * Power: 100 tons (1000kN) * Strokes Per minute: 60 (variable) * Ram-Table Distance: 445 mm * Stroke Adjustment: 0 - 132 mm * Ram Adjustment: 95 mm (motorized) * Table Dimensions: 700 x 1000 mm STANDARD SPECIFICATIONS: * Conformity to CE safety regulations * Welded steel frame * Crankshaft made of AISI 4140 (42CrMo4) alloy steel. Highly durable and ductile. CNC ground for minimum surface friction. * SnBz-12 quality bronze bearings * Pneumatic clutch-brake combination * Fully closed gearbox with helical gears working in oil * Double body press safety valve * Safety PLC & light curtains & safety switches (Pilz) * Ram with 6 slides & waste oil collector * 7-inch HMI touchscreen operator panel * Speed control with AC inverter * Motorized ram adjustment * Mechanical fuse for overload protection (Hydraulic fuse can be installed on standard a machine after purchase) * Pneumatic counterbalance cylinders (ISO, 4 pcs) * Automatic central lubrication & used oil collectors (Thin oil / slideways oil) OPTIONAL EQUIPMENT: Fedsnxh T Rspfx Afnsft * Additional work table * Part ejector mechanisms(upper and/or lower ejectors) * Material feeding, loading & unloading systems (Decoilers, straighteners, pneumatic & servo feeders...) * Special design / customized machine