Folding machine

RAS 71.30

Condition: excellent (used), Year of construction: 1998, sheet thickness steel (max.): 5 mm, Hydraulic swivel bending machine Manufacturer: HOCHSTRATE Type: 3000/5 Year of manufacture: 1998 Technical data Manufacturer: HOCHSTRATE Type: 3000 x 5 Year of manufacture: 1998 Sheet width: 3040 mm Gtodpfxevrxnxo Agbot Bending capacity: 5 mm (400 N/mm2) Motor power: 7.5 kW Space required: approx. 4.7 x 1.90 x 2.20 m Weight: approx. 6.5 t Equipment • PLC control • Bending rail 30 mm All information without guarantee. A demonstration is possible at any time in our exhibition hall.

Condition: used, functionality: fully functional, power: 183.87 kW (249.99 HP), first registration: 11/2011, fuel type: diesel, axle configuration: 4x4, fuel: diesel, color: red, gearing type: mechanical, number of seats: 9, From our immediately available stock of used vehicles, we offer you: Firefighting Group Vehicle LF 10 ALL-WHEEL DRIVE 4x4 on IVECO FF110E25 The LF 10 is the standard firefighting group vehicle for rural areas and small towns. It is suitable for both firefighting operations and technical rescue missions. Thanks to its off-road tires and all-wheel drive, our vehicle is also suitable for use in difficult terrain. General Data: • First registration: 11/2011 • Mileage: approx. 8,400 km • Unladen weight: 8,065 kg • Permissible total weight: 11,500 kg • Last service: 06/2025 • Next general inspection (TÜV): 10/2027 Chassis: • IVECO FF110E25 4x4 with 250 HP (185 kW) • 6-speed manual transmission • Single tires with matched track for maximum off-road capability Cab: • Standard crew cab (1:8 configuration) in RAL 3000 (fire red) • Mounts for 2 breathing apparatus, rear-facing Bodywork: • Manufacturer: Magirus • LF10 bodywork built to DIN specification • Three spacious side equipment compartments on each side • Fold-out steps for front and rear side equipment compartments • Mounts for standard equipment • Storage for portable fire pump • Mounts for 2 additional breathing apparatus Vehicle Pump / Extinguishing Agent Tank: • Magirus FPN 1000-10 centifugal fire pump Gtedjx Nbmqjpfx Agbet • Output: 1,000 l/min at 10 bar • Water tank: 1,000 l • Storage for 6 x 20 liters foam agent in canisters in compartment G6 Firefighting Equipment: • Rigid rapid attack hose, 50 m length, mounted on top of G6 Safety and Lighting: • Perimeter lighting on bodywork • Pneumatic light mast available on request We will gladly prepare a specific offer for you and present the vehicle to you in detail at our location in Berlin. All information has been provided to the best of our knowledge and belief and is without guarantee for completeness or accuracy. This advertisement is for information purposes only and does not constitute an offer. Subject to prior sale!

Condition: new, Year of construction: 2025, ZGR-2140/1,2 with additional equipment Our products are best quality and have certificate CE. Plate Bending Machine ZGR-2140\1,2 Technical data: - Maximum working width: 2140 mm - Sheet gauge up to: 1,2 mm (Steel) - Titan-Zinc-Plate 1,2 mm, Aluminium Plate 2,0 mm Cooper plate 1,7 mm - Max. bending angle: 145 degrees - Rotary shears cut to full working length Gtedpfx Aocntllogbst - Thickness of bending bar: 20 mm - Protractor - Weight: 290 kg - Rotary shears (max. plate gauge 0,8 mm / Steel) + 350 Euro - The machine have certificate CE and 12 months warranty. Shipping costs: its dependent on destination point, please ask us, we check Your total shipping costs.

Condition: good (used), functionality: fully functional, Year of construction: 1990, This high-performance RAS 67.30 folding machine with single-program control is from first ownership. Gtedexmi Hdjpfx Agbot Bending capacity: 3200 x 2.5 mm Drive power: 3 kW Machine weight: 3,800 kg Including pre-selection of bending angle via rotary potentiometer, second foot switch for two-person operation, continuous 45° upper folding beam, segmented/split and raised upper folding beam Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: ready for operation (used), Year of construction: 1984, sheet width 3040 mm plate thickness 4 mm distance between columns 3040 mm stroke of upper beam 200 mm adjustment of lower and bend clamping 100 mm Gtjdpexwzbbsfx Agbjt total power requirement 6,4/3 kW weight of the machine ca. 6,3 t dimensions of the machine ca. 4,3 x 1,2 x 1,8 m Motorized folding machine with double-sided bending beam drive, lower, upper and bending beam adjustable, drive motors as brake motors - slip clutches as overload protection, bending angle adjustment via potentiometer, individual switching for each work step by hand switch, SEGMENTED TOP RAIL 120 mm height (Photo 7).Please notice that such a machine now costs about €70.000,--. As usual, the sheet thickness is based on a strength of 40 kg / mm². Machine dealer with own stock of 2500 m².

Condition: new, Year of construction: 2025, AUTHORIZED DEALER Company PROD-MASZ. BENDING BENCH technology Halver, YOUR competent partner when it comes to BENDING BENCHES Folding bench ZGR2000/0.8 from the company Prod - Masz to try on site and to take away. You will receive professional instruction on site. Technical specifications: -Working width 2140mm - Sheet metal thickness up to 0.8mm -Non-ferrous metals 30% more sheet thickness -Bending angle up to 145° -Bending beam: 15 mm - Passage: 80 mm -degree scale -Stop for preset bending angles - Shelf for sheet metal Gtodpfx Astctmfjgbot -Front depth stop -Weight about 175kg Other dimensions (1000,1440,2140,2640,3140,3640,4140mm) on request Accessories - roller scissors (up to 0.8mm) 350EUR Shipping within Germany 180 EUR All prices are plus 19% VAT. Self pickup Certificate CE Guarantee: 12 months. Self pickup

Condition: used, functionality: fully functional, Year of construction: 1990, machine/vehicle number: RAS 74.30; MB8001, control type: CNC control, working width: 3,200 mm, installation height: 2,400 mm, bending angle (max.): 135 °, sheet thickness steel (max.): 4 mm, sheet thickness stainless steel (max.): 3 mm, sheet thickness aluminum (max.): 5 mm, back gauge adjustment: CNC-controlled, back gauge travel distance Z-axis: 1,500 mm, overall weight: 6,000 kg, total width: 4,000 mm, input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, The machine is in good condition. Control unit and relay board have been overhauled. Complete, segmented gooseneck tool, H=100, is included. Gjdpfex Av Uasx Agbstt

Condition: ready for operation (used), Year of construction: 1996, For sale: the conveyor belt shown in the photo. Please feel free to contact me for further information. Gtedpfevb Ilfex Agbjt

Condition: ready for operation (used), Technical characteristics Godjucitzjpfx Agbstt Power and Motors Voltage: 380 V Pluging: Three-phased Power: 5,5 Kw Motor: 7,5 CV Overall dimensions Lenght: 1000 mm Width: 2000 mm Height: 1700 mm

Condition: used, Year of construction: 1959, sheet width 2040 mm plate thickness 3,0 mm distance between columns 2060 mm adjustment of lower beam 110 mm stroke of upper beam 270 mm Gtsdpjx Hp Auefx Agbet total power requirement 7,5 kW weight of the machine ca. 3,7 t dimensions of the machine ca. 3,1 x 1,5 x 1,5 m