Sheet metal folder, bending machine

Prod-Masz Abkantbank24 Biegemaschine Abkantbank ZGR-2140/1.2mm

Condition: new, Year of construction: 2025, Production of sheet metal working machines is for us always a special challenge, when it comes to the crux, connecting important aspects like dimension, quality, precision of execution and durability of the machine built into a meaningful and functioning whole. max. bending angle 145 degrees max. working length 3,64 m width 0,90 m hight 1.30 m max. opening 80 mm Gtjdpfx Ahjcntl Sovew thickness of steel plate 0.65 mm The rear tray is stable and easily during disassembly Front shock absorbers guarantee for repeatability of cutting Weight: 550 kg possible payment on delivery

Condition: new, Year of construction: 2025, Prod-Masz is your competent and professional partner in the manufacture of sheet metal processing machines. Trust, honesty and reliability are not empty words for us! Model: ZGR-2140 / 1,2 Technical specifications: - maximum working width: 2140 mm - Bending performance: up to 1.2 mm (sheet steel) - Bending angle: max. 145 degrees - Bending beam thickness: 24 mm Gtodpfx Ajccfh Hehvew - lifting the top beam in three positions - gas pressure springs - Passage opening: 80 mm - degree scale Angle stop rear frame for holding the sheet front depth stops - Weight: approx. 290 kg - The machine complies with the CE guidelines and has a 12-month guarantee. Price: € 1.550,00 Delivery - 2-4 days We are looking forward to your contact!

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm Gjdpfx Ahshzbipevotw - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: new, Year of construction: 2025, ZGR-3140/1,0 Our products are best quality and have certificate CE. Plate Bending Machine ZGR-3140\1,0 + additional equipment Technical data: - Maximum working width: 3140 mm - Sheet gauge up to: 1,0 mm (Steel) - Titan-Zinc-Plate 1,0 mm, Aluminium Plate 1,8 mm Cooper plate 1,5 mm - Max. bending angle: 145 degrees - Rotary shears cut to full working length Gtsdpfx Ajcntnkohvjw - Thickness of bending bar: 20 mm - Protractor - Weight: 600 kg - Rotary shears (max. plate gauge 0,8 mm / Steel) + 350 Euro - The machine have certificate CE and 12 months warranty.

Condition: new, Year of construction: 2026, Sheet metal machines type RED are the trademark of the Prod Masz company. Each RED press brake has a narrow folding beam, regardless of its length, can be bent on 3 sides thanks to side cut-outs, 2 handles on both sides. An additional advantage is more space inside for a fold. Professional folding bench RED PLUS with foot pedal Technical specifications: the maximum working length: 3200 mm Bending capacity: 0.8 mm (steel) 1.2 mm (aluminium, copper, zinc) Bending beam thickness: 15 mm Bending angle: max 160 degrees Upper beam opening: 80 mm Weight: about 700 kg Roller scissors plus 350 euros The front depth stops and rear frame are also included in the price. Bending from 3 sides -> cutouts on the side Recess 60mm/45° Marking template FREE :) Gtedpfxscrcgqs Ahvew Price: EUR 6,600.00 Delivery costs: PLEASE ASK Delivery date: every week We are looking forward to your contact! Invoices are issued with 0% as intra-community delivery or with plus 23% of VAT.

Condition: good (used), Year of construction: 1976, machine/vehicle number: 01-6262, Offer 25246 Technical specifications: Gsdpfsw Uhamox Ahvjtw - Max. working width: 2040 mm - Max. material thickness: 2 mm - Bending angle: approx. 0 - 135° - Bending angle lockable with end stop - Upper beam operated via lateral hand crank - Max. upper beam stroke: 85 mm - Max. adjustment of bending beam: 80 mm - Bending process assisted by eccentric weight - Space requirement: approx. W 3250 x H 1250 x D 450 mm - Weight: approx. 1700 kg

Condition: new, Year of construction: 2025, We offer you a wide range of sheet metal bending machines and guillotine shears. What you can expect from us: fast and safe delivery without complications; competent advice and service during and after the guarantee. Promised. Advice, delivery or maintenance? It's a pleasure. For individual machines or entire packages? No problem. We know all of our devices inside and out. For years. And as a manufacturer, we are always up to date. We look forward to you. Folding bench RED-2200 / 0.8 including transport rollers Bending machine folding bench with side cutouts for bending from top to bottom. Thanks to him, you will finish your windowsill. In the machine construction there is a space for curved machining at a height of 6 cm up and down. It is a modern sheet metal bending machine that bends sheet metal from three sides. Technical specifications: - maximum working width: 2080 mm Godog In Azopfx Ahvetw - bending capacity: up to 0.8 mm (sheet steel) - All non-ferrous metals 30% more bending capacity - Bending angle: max. 145 degrees - Folding beam thickness: 15 m - lifting the top beam in three positions - Upper beam stroke: 80 mm Degree scale Angle stop rear frame to hold the sheet metal front depth stops - Weight: approx. 250 kg The roller shears (max. Cutting performance 0.8 mm / steel) plus 350 euros - Hand folding machine plus 75 euros The machine complies with the CE guidelines and has a 12 month guarantee. Delivery date: every week We are looking forward to your contact! Invoices are issued with 0% as intra-Community delivery.

Condition: used, Year of construction: 1979, Technical details: turning diameter over bed: 540 mm turning length: 630 mm centre distance: 900 mm center height over bed: 270 mm center height: über Hinterschlitten: 138 mm Turning diameter: über Hinterschlitten: 250 mm longitudinal feed: 700 mm Gtodpfjvbhv Rsx Ahvow facing movement : 80 / 75 mm revolution per minute: 1,8 - 450 bei 8x steples U/min clamping diameter: 26 mm range of feed in x - axis: 12 step / 0,063 - 0,63 mm/U range of feed in y - axis: 36 step / 0,070 - 1,11 mm/U tailstock quill: MK5 mm tailstock quill stroke: 250 mm Total power requirement: 7,0 kW machine weight approx.: 3,76 t dimension machine xH: 3,2 x 1,2 x 1,8 m Application: Mainly for relief turning and relief grinding of cutting tools (especially hobs with and without thread pitch). Back turning and relief grinding is possible from the front, the rear and in the axial direction of the machine. Main drive via 8-stage manual gearbox. Feed gearbox is designed as a 12-stage manual gearbox. Swivel range of the rear slide = 360deg. Swivel range of cross slide = 360deg. Lathe chuck is cone disc Ø 200mm with MK5 Equipment: turning mandrel Ø 49,5 x 400mm Measuring system ARBAH-L 3+1 Inverter FRENIC 5000G11 i.D. *

Condition: good (used), functionality: fully functional, machine/vehicle number: 804, roller length: 2,550 mm, working width: 2,500 mm, sheet thickness (max.): 16 mm, sheet thickness steel (max.): 16 mm, overall weight: 12,500 kg, 3-roll hydraulic plate bending machine 2500 x 16 mm Manufacturer: KUMLA Gtsdpfjvxbm Rox Ahvow Type: PV 7 H Serial no.: 804, overhauled in 1987 The machine is of a very robust design and has only been used in single-shift operation. Max. bending length: 2500 mm Max. sheet thickness: 16 mm Cone bending device Top roll diameter: 324 mm Bottom roll diameter: 305 mm Hydraulic roll adjustment Dimensions: L x W x H = 5000 x 1600 x H 1900 mm Working height: 1000 mm Additionally, a staircase platform around the machine can be purchased.

Condition: new, Year of construction: 2025, Manual segment bending machine 2 meter working width The SGR model is equipped with segmented bending tools on the three beam elements: upper, lower and bending beam. Sheet metal can be bent on all sides and, for example, complex box shapes or workpieces with bending legs up and down can be produced. Multi-use, powerful, heavy and very solid segment folding bench - this is not a typical folding bench - much stronger and more robust. A segment folding machine is characterized by full segmentation over the entire working length of 2 meters. Upper and lower segments can be removed easily and quickly and the bending beam is divided into segments. The bending angle is from 0 to 160 degrees. Lock with the pedal, your hands are free and you can easily position the sheet metal - open and close with your foot. The bending beam is connected to 2 gas pressure dampers, so controlling the bending beam is incredibly easy. At the rear of the machine 2 practical tool boxes for segments or tools. Technical specifications: - maximum working width; 2050mm Gedpscntp Defx Ahvstw - Bending angle max. 160 degrees - max. sheet thickness (steel) 1.2mm - Weight 600kg - segment jaw width 30,40,50,60,70 and 100mm - three cheeks are equipped with segment jaws (full segmentation) -Stop for preset bending angles -degree scale passage 100mm wheels incl. Delivery date: every week Delivery costs are PLEASE ASK We are looking forward to your contact! Invoices are issued with 0% as intra-community delivery or with plus 23% of VAT (polish invoice).