Single-column hydraulic press with drawing cushion, hydraulic drawing press, deep drawing press, C-f

RÖCHER REP 100.01 SZ

Single-column hydraulic press with draw cushion RÖCHER Type REP 100.01 SZ
Hydraulic deep-drawing press
Machine No. 15.499 Year of manufacture 2003
Pressing force: 100 tons
Ram stroke: 500 mm
Throat depth: 370 mm
Installation height: 600 mm
Table surface: 850 x 700 mm with a drop-through hole Ø 150 mm
Ram surface: 700 x 600 mm
Ram ejector force: 16 tons (160 kN)
Ram ejector stroke: 100 mm
Ram ejector with internal thread M24 x 1.5 mm
Draw cushion force: 40 tons (400 kN)
Draw cushion stroke: 200 mm
Draw cushion area: 530 x 530 mm
Pressure holding time: 0 to 90 sec.
Table height above floor: 910 mm
Hydraulic operating pressure: max. 300 bar
Hydraulic tank capacity: 700 liters
Approach speed (rapid traverse): approx. 400 mm/sec.
Pressing speed up to 23.8 tons (238 kN): 5 to 68 mm/sec.
Pressing speed up to 100 tons (1000 kN): 5 to 16 mm/sec.
Return speed: 50 to 400 mm/sec.
Main pump drive power: 18.5 kW
Auxiliary pump drive power: 4 kW
Power supply: 400 Volt, 50 Hz (63 Amps)
- Operation and programming via PC 670 touch panel, keyboard and mouse
- Machine control via SIEMENS S7-300 PLC system
- Ram stroke and press force programmable via control system
- Draw cushion with drawing and ejector function
- Draw cushion force infinitely adjustable
- Ram and draw cushion equipped with direct linear measurement system
- Draw cushion can be moved in and out under the press area, for punching work using the drop-through hole
- Floor-level installation, draw cushion does not penetrate the floor
- Pressure and stroke cutoff
- Fixed stop with indirect measurement system
- Pressure holding time infinitely programmable
- Table with holes for the draw cushion ram rods
- Ram with ejector
- Knock-out damping
- Stroke triggering via two-hand operation, foot switch, hand lever and push button on the control panel
- LEUZE light barrier as reach-in protection for safety operation
- Front mirror columns on the press table can be shifted laterally
- Electrical control cabinet mounted on machine frame
- Hydraulic oil cooler with fan motor (oil-air cooling)
- Manual central lubrication pump
- 2x hose connections for tool tempering or cooling at the ram
- Piece counter in the control system
- 306 read operating hours
- Operating manual, hydraulic diagram, and electrical diagram available
Space requirements (L x W x H): 3100 x 1800 x 4160 mm
Weight: approx. 13 tons
Very good condition, as new
Gjdeyupulopfx Ahveip

The listing was translated automatically. Translation errors are possible.