Welding turn table

Protec RB 10 000

Condition: like new (used), Year of construction: 2024, load capacity: 10,000 kg, Special price, used for 1/2 year, as new, with warranty Self-centering complete set, dual drive, synchronous with hand remote control, digital display, and foot control Diameter from 300 mm to 3500 mm Iedpfxow D Rhae Abfeth Drive roller diameter 300 mm Dimensions: length: 1900 mm x width: 470 mm x height: 390 mm Continuously adjustable speed 200 – 1200 mm/min. Motor AC 380 V

Condition: like new (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 051888, Used automatic disc cut-off saw Brand: Pedrazzoli Model: SB 350/45 AP Registration number: 051888 Year: 2004 Head block rotation mechanism for angled cuts up to 45° to the left with locking lever. Pneumatic and anti-burr removable vice. Pneumatic cylinder for head movement, with brake for speed regulation. Transmission with double extensible pulley for variable speed from 15 to 90 m/s. Tilting head on adjustable self-lubricating bushings. 600 mm pitch feeder controlled by pneumatic cylinder. Repeat up to a maximum of 9 steps, to obtain a total stroke of 5400 mm. Maximum feeder clamp opening 160 mm. Programmable piece counter. Minimum final cut waste of 160 mm. Feeder speed regulating valve. Ammeter. Reverse gear. Emergency button and switch with padlock on the control panel. Blade lubrication-cooling system with electric pump. Coolant tank with removable pump for tank cleaning. Integral guarding designed for quick blade change. Blade disc Ø 350 mm. Cutting capacity: Round tubes 0°: 102mm 45° right: 102mm Square tubes 0°: 85mm Ioderfw Ikepfx Abfjth 45° right: 90mm Rectangular tubes 0°: 158 x 85mm 45° right: 120 x 85mm Features: Three-phase 380V Dimensions: 1300 x 1350 x 1600 mm Work station height: 950 mm Weight: 420 kg

Condition: new, Year of construction: 2025, load capacity: 10,000 kg, self-centering complete set, double drive, synchronous with hand-held remote control with digital display and foot remote control Diameter from 300mm to 3500mm Drive rollers diameter 300mm x 120mm Dimensions: length: 1900mm x width 470mm x height 390mm Speed continuously variable 100 - 1200 mm / min. Motor AC 380 V Load capacity 10 t Total power requirement 1.1 kW Self-aligning for several diameters Continuously adjustable speed of the drive unit Ijdev En D Nopfx Abfsth Polyurethane coating of the rollers heat-resistant Optimal load distribution (4 rollers/unit), particularly gentle for workpieces with low wall thickness and sensitive surfaces Remote control on the cable and double foot pedal CE certificate

Condition: new, Year of construction: 2025, self-centering complete set, double drive, synkron with hand remote control with digital display and foot remote control diameter from 300mm to 3500 mm drive rollers diameter 300mm dimensions: length 1900mm x width 470mm x height 390mm speed stepless 200 - 1200 mm / min. Isdpfxok Adv Ej Abfjth Motor AC 380 V

Condition: new, With digital technology, the NEOPULSE 400 CW is a three-phase pulsed MIG / MAG generator for heavy industry. Mobile and equipped with a cooling unit and a high-performance unwinding system, the NEOPULSE 400 CW is ideal for tackling the most demanding applications. Intuitive and functional, its digital interface makes it possible to act on the welding parameters with ease. MULTIPROCESS WELDING MIG/MAG : - steel and stainless steel wire: Ø 0.6 to 1.6 mm - aluminum wire : Ø 0.8 to 1.6 mm - CuSi and CuAl wire : Ø 0.8 to 1.6 mm - Flux-cored wire: Ø 0.9 to 2.4 mm MMA DC / Pulsed: basic, rutile and cellulosic electrodes (up to Ø 6 mm). TIG DC CONTACT / PULSED. Itsdpfxemxkggs Abfsh Gouging (up to Ø 6.5 mm).

Condition: new, Year of construction: 2025, load capacity: 10,000 kg, 10-ton container turning device, self-centering roller stand 380 V, continuously adjustable speed from 200 to 1200 mm/min. For diameters from 300 mm to 3500 mm Roller diameter 270 mm x 120 mm Temperature resistance of the support rollers: 100°C Dual drive With hand and foot remote control, complete set Digital speed display Itedpfx Aeg Sz Ursbfjh

Condition: new, Year of construction: 2024, Container turning device 10 tons lifting capacity Double drive Synkron Axle distance steplessly adjustable by means of thread speed infinitely variable with foot remote control diameter from 300mm to 3500mm Roll width and diameter 120 x 270mm Isdpfxoifk Rbs Abfeth Speed 200 - 1200 mm/min.

Condition: new, Year of construction: 2026, For sawing e.g. stainless steel, tool steel, hollow sections and solid materials Two-pole drive motor enables saw band speeds of 30 and 65 m/min Monitoring of saw blade tension electromechanically via microswitch When the saw arm is raised, the lowering cylinder locks in the upper position via the solenoid valve - additional locking at the cylinder is therefore not required Saw arm inclined by 25°, thus longer service life of the saw band Precise and robust band guides with adjustable HM plates After completion of the cutting process the saw band stops automatically in the lower end position Lowering of the saw arm by gravity or manually With infinitely adjustable, constant saw arm lowering speed via hydraulic cylinder Dimensions and weights length approx. 1200 mm width/depth approx. 650 mm height approx. 1800 mm Weight approx. 270 kg Electrical data Supply voltage 400 V Mains frequency 50 Hz Machine data Saw band speed(s) 30 / 65 m/min Speed levels 2 Saw band length 2450 mm Saw band width 27 mm Saw band thickness 0,9 mm Material feed Table height material feed 925 mm Cutting range Ijdpfx Ajg U Uv Rebfoth 0° round (tube) 220 mm 0° round (solid material) 120 mm 0° rectangular lying (hollow profile) 230 x 150 mm 0° bundle (tube) 230 x 120 mm -45° round (tube) 160 mm -45° round (solid material) 85 mm -45° rectangular lying (hollow profile) 160 x 90 mm -60° round (tube) 90 mm -60° round (solid material) 55 mm -60° rectangular lying (hollow profile) 90 x 90 mm Art. No.: 3680001 S

Condition: like new (used), Year of construction: 2024, Special price, used for 1/2 year, as new, with warranty Self-centering complete set, dual drive, synchronous Iodpfxjwt A Nze Abfsth with hand remote control, digital display, and foot control Diameter from 300 mm to 3500 mm Drive roller diameter 300 mm Dimensions: length: 1900 mm x width: 470 mm x height: 390 mm Continuously adjustable speed 200 – 1200 mm/min. Motor AC 380 V

Condition: new, Year of construction: 2026, Drilling and milling machine Kudu with CNC control and tool changer (3-axis) drilling and milling machine with movable processing unit - the table remains stationary, the drill head moves. The drilling machine can be used both manually and fully automatically. After each drilling process, the processing unit moves to the next drilling position fully automatically in the X and Y axes. Operation is kept very simple. The data can be transferred to the machine control using the file formats DXF./DWG. be carried out via a programming station. Alternatively, the system can also be programmed directly on the machine control. The system is very robust and consists of proven machine components. Technical data: • Measuring length: 6,000 mm • Total length: 8,050 mm • Stable machine base • Drilling head speed: up to 2500 rpm (standard version), is supplied with the right speed for your application. • Tool holder: SK 40 • Drive of the X, Y and Z-axes via servomotors • Rapid traverse in the X-axis: 20 m/min • Rapid traverse in the Y-axis: 5 m/min • Distance from upper edge of table to lower edge of tool holder 400 mm • Table width 480 mm • Working height: 1050 mm • Drilling diameter: 3 to 30 mm in St. 50 (depending on the tool) • Tapping: M4 - M30 (with compensating chuck) • Machining path in the Y axis: 300 mm • Tolerance in the X axis: + - 0.1 mm • Tolerance in the Y-axis: 0.06 mm • Tolerance in the Z-axis: 0.06 mm • Drill head drive motor: 5.5 kW • System weight: 2300 kg • System dimensions: 8050 mm x 3000 mm x 2388 mm (see layout plan) • Power connection: 32 A • Air connection: 8 bar • Protection of the system at the front via light barrier • Access protection at the rear, machine fence • Control touch screen panel 21.5", reinforced front glass • Easy programming on the Machine • Milling of long holes and circles • Lubrication takes place using a minimum quantity spray system • without material vices • Remote maintenance possible using Teamviewer (LAN interface) • Tool memory for drilling tools, with dimensions, speed • Simulation of work processes • Digital hand wheel Ijdpfxofu Ivzs Abfoth Your advantages • The surface of the workpieces is protected • Clear, graphic surface • Machining directly at the end of the workpiece is not difficult • 50% space saving compared to pushing machining • Chips are collected in the chip tray • Simplest programming & operation • Minimum quantity spray system (standard) • Programming errors are prevented by CAD /CAM excluded