Welding turn table

Protec KT 3000 HV

Condition: new, Year of construction: 2023, Protec KT 3000 HV, Hydraulic height adjustable Load 3000 KG Manual remote control with digital display Double foot remote control Height approx. min. 700mm tilted to center, height max. 1400mm diameter faceplate 1400mm Tilt angle min. 135 Rjdpfsifw Hdox Adaen Speed 0,05 to 0,9 rpm. Motor power 3 KW

Condition: new, Year of construction: 2024, 600 kg load capacity Welding turntable height adjustable with through hole 100 mm Plate diameter 700mm Horizontal height min. 0.65m, max. 1.25m Height tilted min. 0.45m, max. 0.95m Speed from 0.01 - 1.3 rpm Tilt up to 135° Hand and foot remote control with speed display Redsg Tdpgopfx Adajn very robust

Condition: as good as new (ex-display), 3000 kg welding rotary table, hydraulically height adjustable Rodpjdvn E Usfx Adaen Speed 0.05-0.6 U/min Table diameter 1200 mm Inclination 0-120° Total height 700 mm Height adjustment with vertical pane until the mid- 960 mm ~ 1910mm Horizontal disc mass 1200mm up to 1900mm

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, load capacity: 3,000 kg, Protec KT 3000 HV, hydraulically height-adjustable Load 3000 KG Rjdpfx Adsq U Ac Dsaen Hand-held remote control with digital display Double foot remote control Height approx. min. 700mm horizontal, height max. 1400mm Diameter of face plate 1400mm Angle of inclination min. 135° Speed 0.05 to 0.9 rpm Motor power 3 KW we have a huge selection of turntables in all sizes from 100 kg to 30 tons load capacity Used and new machines

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: GM2000.5000 H-322.41.9000.3E 130.20, Load capacity 5t Reeving 4/1 Lifting height 9m Lifting speeds 8/1.3m/min Cab travel speeds 20/5m/min FEM group 2M Rjdpfx Aevx E I Sodaen Operating voltage 400V Control voltage 230V Flange width 300mm Several immediately available in stock

Year of construction: 2023, condition: new, 3000 Kg welding rotary table, hydraulic height adjustable Complete set speed 0,05 to 0,6 rpm table diameter 1200mm inclination 0 to 120 Total height adjustment approx. 700mm Height adjustment with vertical disc to center 960 mm ~ 1910mm Dimensions with horizontal disc Rjdpfxjk Adlij Adajn 1200mm to 1900mm

Condition: as good as new (ex-display), Year of construction: 2022, Protec KT 3000 HV, Hydraulically height adjustable Load 3000 KG Manual remote control with digital display Double foot remote control Height approx. min. 700mm tilted to middle, height max. 1400mm Diameter faceplate 1400mm Rsdjfky Iqjpfx Adasn Tilt angle min. 135 Speed 0,05 to 0,9 rpm. Motor power 3 KW

Condition: new, Year of construction: 2024, travel distance Y-axis: 600 mm, travel distance Z-axis: 450 mm, - Simple graphic programming, including GoTo function in manual mode - Machining lengths from 3000 - 16500mm, depending on version - Free programming in DIN/ISO (G commands) - 2-axis interpolation for X/Y-axis, including arcs - 3-axis linear interpolation (X/Y/Z) - 3-axis interpolation (X/Y/Z) for helical milling and thread milling - Rapid traverse X-axis = 30 m/min., Y-axis = 25 m/min. Main spindle BT 40 - 5 bearings, diameter 110/60 mm (3x angular contact ball bearings 7212, 2x deep groove ball bearings 6212) - Suitable for both high axial and radial loads = drilling and milling - Maximum tool length : 290 mm - Maximum tool diameter : 88 mm Rjdpfx Asrb Afajdaon Guide X-axis - 2 pieces 45 mm linear guides with 2 full ball bearing carriages each X-axis drive - helical precision rack, travel 3,000 to 16,500 mm Y-axis guide - 2 35 mm linear guides, each with 2 fully spherical carriages Y-axis drive - Ball screw diameter 25 mm, travel 600 mm Z-axis guide - 2 35 mm linear guides, each with 2 fully spherical carriages Z-axis drive - Ball screw diameter 32 mm, travel 450 mm Standard version Automatic tool changer with 10 positions, mounted in the machine column

Year of construction: 2022, condition: new, 3000 Kg welding rotary table, hydraulically adjustable in height speed 0,05 to 0,8 rpm very robust, complete set with hand and double foot remote control Rjdpfxeff Ngie Adajn table diameter 1200mm inclination 0 to 120 total height adjustment approx. 700mm Height adjustment with vertical disc up to center 960 mm ~ 1910mm Dimensions with horizontal disc 1200mm to 1900mm We have the turntables with 600Kg, 1000Kg, 3000Kg, 5000Kg in the offer

Condition: new, Year of construction: 2023, Protec KT 3000 HV, hydraulically height-adjustable Load 3000 KG Hand-held remote control with digital display Double foot remote control Height approx. min. 700mm tilted to center, height max. 1400mm Diameter of face plate 1400mm Redsqvnh Tspfx Adaon Tilt angle min. 135° Speed 0.05 to 0.9 rpm Motor power 3 KW

Condition: new, Year of construction: 2024, pressure: 8 bar, Miter setting horizontally 15°- 90°15° infinitely variable saw motor 5.50 KW (400 volts) saw blade 600 mm traversing range rear stop 180 mm working height 940 to 1000 mm adjustable via feet 2 x suction nozzles (above in the hood and below) net weight 600 kg WxDxH 135x140x150 cm RAL 9007 gray aluminum rotary plate polished nickel steel Saw head with recirculating ball guides designed with high accuracy and long service life and high rigidity. Sawing material can be preloaded with low pressure when the hood is open. Hydropneumatic sheet feed Chip flow towards the extraction hood. Furnishing • Precision underfloor circular saw • Miter adjustment 0º/ 45º/ 90º/ -45º / -60º continuously • incl. 2 pneumatic vices (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Suction device-swarf extraction system Othgf • Mist spray device for air-oil cooling • Air gun with spiral hose • incl. maintenance unit with pressure reducer • Ergonomically arranged control panel • maximum cutting height 230 mm Hxdcvds7y • Saw blade 600mm • Saw blade not included! Our NC pusher system ensures that your machining parts are positioned at the desired machining position on our UK 600 HA 90°. A gripper clamps the material, the NC control positions the material automatically. The tension and the sawing process are then triggered. The positions are previously programmed into the program control. Once the machine tool has completed your machining, it automatically moves to the next sawing position. Depending on the processing part, several parts can also be clamped on top of each other/next to each other and positioned at the same time. Rjdpfegwt S Tsx Adajn It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, load capacity: 3,000 kg, Protec KT 3000 HV, hydraulically height-adjustable Load 3000 KG Hand-held remote control with digital display Double foot remote control Height approx. min. 700mm tilted to center, height max. 1400mm Rjdjt Sk Imepfx Adaon Diameter of face plate 1400mm Tilt angle min. 135° Speed 0.05 to 0.9 rpm Motor power 3 KW on request with original Siegmund perforated plate octagonal table plasma nitrided 1800 x 25 bore 28mm (surcharge)

Condition: new, load capacity: 3,000 kg, Protec KT 3000 HV, hydraulically height adjustable Rjdpfx Ajt Ugm Rjdajn Load 3000 KG with load center of gravity 300mm Handheld remote control with digital display Double foot remote control Height approx. min. 700mm tilted to center, height max. 1400mm Diameter of face plate 1400mm Inclination angle min. 135° Speed 0.05 to 0.9 rpm Motor power 3 KW Perforated plate surcharge

Condition: new, DESCRIPTION DM100 Z2C - performs edge rounding and removes sharp burrs from both the inner and outer edges of steel, stainless steel or aluminium parts after laser, shear or punch cutting of metal parts from 50 x 50 mm up to 1100 x 100 mm in size. Ekdjtxp The 1st station processes the products through a contact roller (approx. 55° shore) with an abrasive belt and removes strong burrs in the first step. The 2nd station processes the products with 2 counter-rotating cross belts each from below and from above. The cross belts round off the parts to be machined on both the inner and outer edges. A big advantage is also the deburring of products with surface protection foil, because only the edges are processed without damaging the foil. Rjdpfod Ixadex Adasn Technical data - DM1100 Z2C: Working capacity (Ø mm) 1100x100 No. of belt stations (Z) 1 No. of cross belt stations 2 Abrasive belt, dimensions (mm) 1100x2200 Abrasive belt speed (m/s) 8-22 Cross belt speed (m/s) 2-8 Feed speed (m/s) 0.6-3.2 Sanding belt motor per head (kW) 18.5 Cross belt motor (kW) (2x) 3 Feed motor (kW) (3x) 0.18 Total power (kW) 33 Power consumption (A) 62 Rod suction connection per head (Ø mm) 150+185 Dimensions (mm) 3600x2330x2350 Weight (kg) 5000