Press brake

Promecam

Year of construction: 2021, condition: as good as new (ex-display), Overband plate magnet Version in VA 1.4301 tightly welded 800 x 500 x 180mm completely welded housing Caedpfod Evl Dsx Ab Toa Ring eyelets for suspension

Condition: used, pressure 50 t chamfer lenght 1500 mm distance between columns 1220 mm Control Cybelec DNC 1200 closing speed 95 mm/min working feed 1-10 mm/sec work stroke 156 mm overrun time 59 ms tracking travel 6 mm throat 200 mm distance table - lower edge of ram 301 mm table width 160 mm Codpsra Rrhsfx Ab Toaa table height 850 mm x-axis 550 mm travel R-axis +/- 50 weight ca. 3600 kg a lot of lower and upper tools incl. work light

Condition: ready for operation (used), functionality: fully functional, working width: 850 mm, Four-side planer Manufacturer: Kupfermühle Model: VUIN Maximum working width: approx. 850 mm Maximum planing height: approx. 200 mm Planing spindle with 4 knives Codpfow Hr Nkex Ab Toaa With electronic height adjustment 1 horizontal shaft from above, 7.5 kW 1 horizontal shaft from below, 7.5 kW 1 vertical shaft from the left, 4 kW 1 vertical shaft from the right, 4 kW Feed motor 3 kW

Condition: new, 0 8000 kg gear diameter 75 mm 105 mm Width 190 mm length 370 mm height 100 mm loading area rund 100 mm Codpfxevu E U Dj Ab Toaa weight Gesamt 70 kg dimensions 800 x 600 x 250 m Heavy-duty castors, 2-part Total load capacity 16 t. with turntable ATTENTION: Only 2 pieces are included in the offer.

Condition: excellent (used), Year of construction: 1997, Pressure capacity 40 t Folding length 2100 mm Clearance between the uprights 1600 mm Projection 220 mm Installation height approx. 300 mm Stroke length approx. 100 mm Working height 880 mm Table width 135 mm Stroke rate approx. 9 / min Table width approx. 240 mm Emptying speed approx. 70 mm / s Working speed approx. 13 mm / s Retraction speed approx. 100 mm / s Drive power 5.5 kW Dimensions L x W x H 2400 x 1400 x 2100 mm Weight 3750 kg Accessories / Special features: - As good as new deer foot upper tool, continuous, can be sawn to any length yourself - As good as new universal die with various openings, 70 x 70 x 2100 mm - Motorized plunge depth adjustment with digital display - Manual backgauge approx. 600 mm with SIKO counter - Fast rapid feed and fast retraction - 2-hand operation, combined with foot switch + EMERGENCY STOP - 2 backgauge fingers - Pressure regulation via potentiometer on the control panel - Control panel, swivel-mounted - CE marking Siegfried Volz Machine Tools Casdpfx Abju Agk Ho Tja Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: new, table length 2000 mm Caedovu Hahopfx Ab Tea table width 1000 mm table height 920 - 1000 mm 2000 kg height of stroke max. 1525 mm total connected load 1,5 kW connected load frequency 400 V weight of the machine ca. 0.95 t Welding table on lifting table: Hole diameter: 28mm The table is made of 15mm thick S355 steel The surface is stained and oiled. Tolerance: +/- 1 mm at the top and +/- 1 degree at the sides. Side panels 150 x 10mm Ribbed bottom for reinforcement.

Condition: ready for operation (used), empty load weight: 340 kg, total length: 1,430 mm, total width: 560 mm, total height: 980 mm, Can work in horizontal and vertical positions 3 driven rolls digital readout hydraulic stroke of upper roll: 124 mm with tooling for tubedia 28 44 mm Read-out: digital readout Dia rolls: 165 mm Dia of die mandrel: 40 mm Rotationspeed: 10 rpm Casdpfx Aoxlli Eeb Tja Motorpower: 1,85 kW

Condition: excellent (used), Year of construction: 2004, Technical specifications: Working length: 2600 mm Cajdpfx Aewd Uinsb Toa Width between columns: 2150 mm Pressing force: 45 tons CNC control: DELEM DA 66 W Controlled axes: Y1/Y2; X; R; Z1/Z2 Motorized adjustable backgauge with 4 stop fingers Thrust: 310 mm Working height: 930 mm Motor power: 5.5 kW CE mark Dimensions (length x width x height): approx. 3000 x 2150 x 2150 mm Weight: approx. 5 tons Accessories: 1 set of standard tools Condition: The machine is in very good condition. The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: used, Year of construction: 2008, pressure 56.0 t chamfer lenght 1400 mm distance between columns 1300 mm throat 220 mm stroke 200 mm dayligth 485 mm work speed 8.0 - 10.0 m/min return speed 35.0 mm/sec Control CNC Boschert Csdpfxoxaanxo Ab Toaa back stop - adjustable 0 - 370 mm work height max. 915 mm Cylinders : 2 Stück voltage 3x 400 V connected load 8.0 kVA weight 3700 kg range L-W-H 2320 x 1280 x 2030 mm very good / well-maintained condition (!!) with lots of bending tools - in checked conditions - machine video - ?v=NrpZs6Ar0Vo Equipment: - NC electro-hydraulic press brake - BOSCHERT NC control unit, front - NC electro-motorized back stop (X axis) * with 2x manually adjustable stop fingers (R+Z axis) - AMADA PROMECAM (SYSTEM A) upper tool holder - AMADA PROMECAM (SYSTEM A) lower tool holder - Handwheel with analog display for adjusting the bending angle - lots of insert tools, including tool cabinet - 1x working cylinder = double-acting cylinder - upper beam made from a solid steel plate - pressure gauge for pressing pressure (infinitely adjustable) - 2x front support tables - 1x freely movable foot switch - robust machine base - rear protective device (cover + circuit breaker) - original operating instructions (machine + control)

Condition: good (used), Year of construction: 1995, Description Control Sinumerik 810M Spindle speed 5000 rpm Turret head 12 - position Table clamping surface length 850 mm, width 325 mm Very good condition, regularly serviced. Operating instructions German Cedpfx Absvt Amuj Tjaa Number of axes 3 (X, Y, Z) Travel path X 420mm, Y 330mm, Z 240mm Control: Sinumerik 810 M Max. spindle speed 5000 rpm Automatic tool changer for 12 tools SK40 holder Coolant system