Sheet metal folder, bending machine

PROD-MASZ Abkantbank, Biegemaschine Abkantbank 2m ZGR-2140/1.2

Condition: new, Year of construction: 2025, maximum working length 2140 mm Pedpfobntdmjx Ah Hsgg sheet gauge up to 1,2 mm approx. weight of hand machine 300 kg shear cutting on the whole working length upper bar lifting in three positions maximum clearance between bars100 mm

Condition: new, 900 mm 900 mm 900x900 mm saw band length 9300 x 67 x 1,1 mm table height 790 mm band speed 14 - 60 m/min total power requirement 11 kW weight of the machine ca. 8,45 t dimensions 4,485 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Pgodpfx Ahjfg E Hpo Heg Guides. Price on request.

Condition: new, Year of construction: 2025, Production of sheet metal working machines is for us always a special challenge, when it comes to the crux, connecting important aspects like dimension, quality, precision of execution and durability of the machine built into a meaningful and functioning whole. Pgodpfx Ahscntl Sj Hog max. bending angle 145 degrees max. working length 3,64 m width 0,90 m hight 1.30 m max. opening 80 mm thickness of steel plate 0.65 mm The rear tray is stable and easily during disassembly Front shock absorbers guarantee for repeatability of cutting Weight: 550 kg possible payment on delivery

Condition: new, Year of construction: 2025, Sheet metal folder ZGR-3140/1.0 We have a new, high-quality folding machine of 3140 mm/ 1.0mm. This machine guarantees very high quality and agility of the work doing by the roofers. Our main task is the production of folding machines, with which we are concerned many years. The bending machine is equipped in degree scale, Romans screws, rear frame and gas struts. Directly from manufacturer! Pgedpfx Aoci R Exjh Hog - max. working length 3140 mm - steel plate to 1.0 mm - our machines bend both a copper sheet and aluminum sheet - the total weight of machine is 600 kg - the clearance between the lower beam (fixed) and the upper beam (pressed) of 80 mm - bending angle of 145 degrees - thickness of the bending beam of 20mm - new, full machine - delivery to the client - certificate CE - TAPPING ANGLE IS FREE !! Price excl. shipping We provide invoices with 0% of tax. Delivery every week :)

Year of construction: 1970, condition: good (used), machine/vehicle number: 024.0468, Offer 22569 Pgjdpfxop Atvmo Ah Hsg Technical data: - max. working width 2040 mm - max. material thickness 2 mm - bending angle approx. 0 - 135 ° - motorized stroke upper beam - max. stroke upper beam 85 mm - max. adjustment bending beam 80 mm - manual bending process is supported by eccentric weight - connection 400 V - space requirement approx. W 3700 x H 1250 x D 450 mm - weight approx. 1700 kg

Condition: new, Year of construction: 2025, Capacity 2020 x 2 mm (ST37) Delivery of the upper beam by hand lever left + right Slanted segments in the upper beam Continuous bending and lower beam rails RAL 7016 paint Manufacturing EU immediately available ex works Freight costs on request Podpefifa Asfx Ah Hjgg

Condition: like new (used), Gea CFS Koppens Thermal oil fryer BR 3500/600 Suitable for thermal oil heating; Net belt length: 3.500 mm Net belt width: 600 mm Machine dimensions (LxWxH): 6.000x900x1.600 mm Machine weight: 750 kg. Pjdpfx Ahskvni Aj Hegg Capacity: 250 kg/h in 600 liter oil

Condition: new, Year of construction: 2025, Bending machine PROD-MASZ to the plate ZGR 2640/1.2 is a sensational machine for precision bending of all types of metal sheets (steel 1.2mm, titanium zinc 1.2mm, aluminum of 1.5 mm, copper sheet 0.8 mm). Pgsdpsdad Adefx Ah Heg Equipped with a rack supporting plate, two front bumpers, bending angle measurement, a single lock of bending angle, turnbuckles, eccentric mechanisms. Each part of the machine is adjustable, which allows for adjustment of the arc bending. Used in the device locking system (set by the operator) allows you to achieve the desired angle of bending. Table rear and front bumpers are made of galvanized racks. Ideal for all kinds of steel treatments - wherever the roof is exposed to moisture infiltration. Proper execution of these connections certainly prolong the life of the roof. By hers construction she can be used not only for bending panels with both the ferrous metal, sheets of plastic and fiberboard. - Max. bending angle: 145 degrees - Rotary shears cut to full working length - Thickness of bending bar: 24 mm - Protractor - Weight: 350 kg Rotary shears (max. plate gauge 0,8 mm / Steel) + 350 Euro - The machine have certificate CE and 12 months warranty. Only shipping is possible Delivery every week Price excl. shipping We provide invoices with 0% of tax.

Condition: new, Year of construction: 2025, Prod-Masz is your competent and professional partner in the manufacture of sheet metal processing machines. Trust, honesty and reliability are not empty words for us! Model: ZGR-2140 / 1,2 Technical specifications: - maximum working width: 2140 mm - Bending performance: up to 1.2 mm (sheet steel) - Bending angle: max. 145 degrees Pjdpfxsccfh Hs Ah Hsgg - Bending beam thickness: 24 mm - lifting the top beam in three positions - gas pressure springs - Passage opening: 80 mm - degree scale Angle stop rear frame for holding the sheet front depth stops - Weight: approx. 290 kg - The machine complies with the CE guidelines and has a 12-month guarantee. Price: € 1.550,00 Delivery - 2-4 days We are looking forward to your contact!

Condition: new, Year of construction: 2025, Sheet metal machines type RED are the trademark of the Prod Masz company. Each RED press brake has a narrow folding beam, regardless of its length, can be bent on 3 sides thanks to side cut-outs, 2 handles on both sides. An additional advantage is more space inside for a fold. Professional folding bench RED PLUS with foot pedal Technical specifications: Psdpfx Ascrcgqsh Hegg the maximum working length: 3200 mm Bending capacity: 0.8 mm (steel) 1.2 mm (aluminium, copper, zinc) Bending beam thickness: 15 mm Bending angle: max 160 degrees Upper beam opening: 80 mm Weight: about 700 kg Roller scissors plus 350 euros The front depth stops and rear frame are also included in the price. Bending from 3 sides -> cutouts on the side Recess 60mm/45° Marking template FREE :) Price: EUR 6,600.00 Delivery costs: PLEASE ASK Delivery date: every week We are looking forward to your contact! Invoices are issued with 0% as intra-community delivery or with plus 23% of VAT.