Punch

Pressta Eisele Dyno 6A

Year of construction: 2009, condition: ready for operation (used), machine/vehicle number: 527, Offer 23035 Approximate technical data: - Pressing force: 30 tons Hjdpjlnkc Uefx Aahep - Maximum sheet thickness: 10 mm - Maximum punching diameter: 105 mm - Punching capacity: - e.g., steel sheet: 105 mm in 1.5 mm; 45 mm in 5 mm - e.g., stainless steel sheet: 90 mm in 1.5 mm; 45 mm in 4 mm - Stroke: 7 - 70 mm - Overhang: 560 mm - Maximum stroke rate: 120 strokes/min - Single stroke / continuous stroke - Drive: 400 V / 4 kW - Space requirement (approx.): W 8000 x H 1850 x D 1700 mm - Weight (approx.): 1900 kg - Includes: - Stop table with stops - Foot pedal - Emergency stop button - Quick tool change device - Various punch and die holders

Condition: used, Year of construction: 2007, Technical details: throat: 640 mm round bar steel: stanzen: Ø 26 x 20 mm Punching capacity: 70 t total power requirement: 5,5 kW weight of the machine ca.: 2,0 t dimension machine xH: 2,0 x 1,0 x 1,8 m hydraulic section steel shearing machine shearing station: -shear max. 300 x 20mm / 375 x 15mm -shear cutting max. 150 x 13mm -holding-down device adjustable in length to 630mm profile station: processing of round and square profiles; U-profiles; double T-beams and non-symmetrical angles Angle/profile cutting -angle steel max. 90° shearing = 150 x 15mm and 45° shearing = 80 x 10mm -U-I profile = 130 x 65mm; T profile = 90 x 12mm -profile cutting max: round steel Ø 45mm and square steel 45mm -knife cutting edges fourfold Punching station: -Punching force 60to -throat 640mm -table WxD = 1000 x 600mm Hedpfxou Icmho Aahep -punching max. Ø x thickness: Ø 26 x 20mm and Ø 57 x 9mm -slot punching D x W x D: 10 x 45 x 90mm -through hole in table Ø 40mm -Equipment: stop bar Al angle 100 x 80 x 1000mm Notching station: -Table W x D 430 x 380mm -notches: material thickness 10mm; width 45mm; depth 60 - 90mm; angle flange 100 x 10mm Punching: -Table 600 x 600mm -throat 625mm -bore max: Ø 57 x 12mm -working stroke 80mm; stroke rate 34 strokes/min; punching pressure 40to -stop angle 200 x 100mm L=600mm Notching station: -Table size 450 x 450mm -notching material thickness 13mm; width 52mm; depth V 90° 70 - 100mm; angle flange 100 x 13mm Please ask for accessories. Operation by foot switch Some accessories available. Please ask. *

Condition: ready for operation (used), Year of construction: 2019, Lifting capacity: 2000kg, lifting height: 4000mm, fork length: 1220mm, power: 41kW, fuel: gas, machine dimensions X/Y: approx. 2350mm/1000mm, operating hours: 1793h. Including attachment Bolzoni Shifter 5BSS200F, mast model: 5F20C40, tower height: 2500mm. Documentation available. On-site inspection is possible. Hsdpfsv Ip Sgsx Aahop

Condition: used, Year of construction: 1983, round bar steel 50 mm square edge steel 40 x 40 mm L-beam 140 x 13 mm Punch power 900 kN hole punching press: throat 510 mm hole punching press: max. length of stroke 29 mm hole punching press: capacity (dia. x thick.) 31 x 20 mm notching: l + T material 80 x 14 mm no. of strokes 40 / 45 Hub/min total power requirement 4 kW weight of the machine ca. 3,7 t dimensions 2,1 x 0,7 x 2,12 m Hjdpjvh I T Njfx Aahop Accessories: various punches and dies

Condition: good (used), Year of construction: 1991, machine/vehicle number: 0168091277886, Offer 23294 Hydr. combined flat and profile steel shears with notching device and hole punch Technical data: - Flat steel shears - blade length 470 mm Hjderll I Uspfx Aahep - for flat material 450 x 15 mm - or 300 x 20 mm - Profile steel shears - L-steel at 90° 140 x 13 mm - at 45° 70 x 7 mm - T-steel at 90° 70 mm - Steel bar shears - round steel 50 mm - Square steel 42 mm - Notching device - rectangular notching 52 x 90 x 12 mm - Hole punch - Punching force approx. 750 KN - Infinitely variable stroke 0 - 70 mm - punches holes in steel up to 30 mm Ø in 20 mm - throat 310 mm - Hydraulic drive 400 V / 7.5 kW - Space requirement approx. W 1600 x H 1850 x D 1400 mm - Weight approx. 2400 kg - with: - 2 E. foot pedals for two separate work stations - Turntable

Condition: excellent (used), Profile steel shear, profile shear, punch, punching machine, hole punch, hydraulic flat/profile and bar steel shear -Manufacturer: Mubea, hydraulic profile steel shear type HIW1000 -Drive: hydraulic -Pressure force: 100 tons -Equipment: large support table with stops for die-cutting, various stamps and dies Hodpfxox Dclbj Aahop -Production: Punching, shearing, cutting, notching -Dimensions: 2360/760/H1800 mm -Weight: 2700 kg

Condition: good (used), punching force: 45 t, - Capacity 45 tons Hjdpfeu Havwox Aahep - Hydraulic - 4 stations - Foot control - Emergency stop - 400 V

Condition: ready for operation (used), Year of construction: 2018, Width: 1860mm, depth: 800mm, height: 1900mm, weight: approx. 2.3t Rectangular notchers: 57 x 100mm, triangular notchers: 5 x 5 x 7.5mm. Notching station width: 330mm, working height: 915mm Hsdpfjrxflcox Aahsp

Condition: new, messurements (LxWxH): 0,80 x 0,85 x 1,20weight approx.: 0,610total power requirements: 4sheet thickness: 6Details: Hjdsd Ab Icjpfx Aahjp Hydraulic drive, 6 mm at 90° (fixed) Blade length: 200 mm Notching angle: 90°

Condition: used, Year of construction: 2007, GEKA HYD 110 Hedpfx Aasynkduohep