Eccentric press

PRESSIX T50 CNR4

Condition: used, functionality: fully functional, machine/vehicle number: 211433, workpiece weight (max.): 1,200 kg, Offered for sale is a Schaublin 135 lathe in good technical condition. The machine is fully functional with accessories. All guideways are in good condition, and the machine's geometry is sound. All slides run smoothly and evenly. The machine was overhauled in 2002 and has always been serviced according to the manufacturer's specifications. Please take advantage of the opportunity to view this machine on-site. Isdpfx Adsv Rxhijnea

Year of construction: 1986, condition: ready for operation (used), BSTA 60 HL, with BBV 202/120 CE possible Isdpfx Adoizkmtjnea Contact us!

Year of construction: 1976, condition: defective spare-parts repository (used), manufacturer: Ahrens Year of manufacture: 1976 Model: 206 Z Technical data: sheet width: 1000mm sheet thickness: 0,7mm Profiling stations driven: 12 pieces shaft diameter: 55mm drive: 55kW infeed width: 1100mm distance between the stands: 650mm Dimensions of the individual components: roller table 1: 6.000 x 1.700 x 1.700 mm roller table 2: 6.000 x 1.700 x 1.700 mm Drive 1: 3,800 x 1,000 x 1,500 mm Drive 2: 6,300 x 1,000 x 1,500 mm reel: 3,000 x 1,300 x 1,600 mm shear: 1.700 x 650 x 1.000 mm Euro pallet: 1,200 x 800 x 1,200 mm For the whole machine 2 trucks are needed! Accessories/ special equipment: Iedpsg Ul S Dsfx Adnea Decoiler Profile shear Remark: The switch cabinet is missing. The machine is therefore not ready for operation.The machine is used as basic setup for roof trapezoidal profiles with high beading.

Condition: used, Year of construction: 2018, pressure 800 t stroke 80 – 360 / 400 mm no. of strokes 3 – 60 /min distance between columns 4200 mm dayligth (stroke and adjustment up) 1400 mm column travel -side 1800 mm table surface area 4000 x 1800 mm hole in the table 3400 x 450 mm table height over floor 950 mm ram surface 4000 x 1700 mm ram adjustment 305 mm material width 800 mm material thickness 0,7 - 6,0 mm material cross-cut 2800 mm² power requirement 475,0 kW Iedsw D Hkdopfx Adnsa Weight 154,00 t dimensions of the machine ca. 6,05 x 3,95 x 7,7 mxmxm total height over floor 6,6 m Servo-Press (Press, Coil Line, Transfer) - Press Schuler, MSD 2-800-4.0x1.8-400 Servo - eccentric drive in transverse-shaft design via 2 torque motors, hydraulic overload protection, motorised ram adjustment, ram counterbalance, main control panel with TFT touch colour display motor-driven retractable change plate, hydraulic slide-in clamping elements - Coil Line Schuler-Automation AC-UEL-M-0800 / AC-SH-9-70/160-0800 R-L / AC-RM-EHP-0800 Transfer Schuler-Automation AT2-M-800-500-405

Condition: used, TECHNICAL DETAILS - Number of axes : 9 Isdpfxowdalnj Adnsa - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 32 [mm] - Max. machining length : 320 [mm] - Spindle speeds : 8.000 [rpm] - Spindle power : 3.7 / 5.5 [kW] - C axis indexing precision : 0,001 [°] COUNTER-SPINDLE - Max. bar diameter : 32 [mm] - Spindle speeds : 8.000 [rpm] - Spindle power : 2.2 / 3.7 [kW] - C axis indexing precision : 0,001 [°] GUIDE BUSH HOLDER 1 - Number of positions : 9 - Number of motorized positions : 4 - Live tools speed : 6.000 (T01-T02-T03) / 4000 (T04) [rpm] - Live tools power : 1 [kW] - X/Y stroke : 142 / 348 [mm] GUIDE BUSH HOLDER 2 - Number of positions : 3 GUIDE BUSH HOLDER WITH AXIS B - Number of positions : 8 - Number of motorized positions : 4 - Live tools speed : 5.000 [rpm] - Live tools power : 1 [kW] - Stroke axis B : 0 - 135 [°] SECONDARY OPERATION - Number of positions : 8 - Number of motorized positions : 4 - Live tools speed : 6.000 [rpm] - Live tools power : 1 [kW] END ATTACHMENT - Number of positions : 2 - Number of motorized positions : 2 - Live tools speed : 8000 [rpm] - Live tools power : 1 [kW] POWER SUPPLY - Total installed power : 21 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2.150 x 1.280 [mm] - Machine height : 2.010 [mm] - Machine weight : 3.600 [kg] MACHINE HOURS - Number of hours under power : 37855 [h] - Number of working hours : 9578 [h] EQUIPMENT - CNC : Fanuc 31i-B5 - Interface : RS232 / PCMCIA / RJ45 / USB - Rotating guide bush - Parts catcher - Ejection of workpiece - Parts conveying strip - Chips conveyor - Coolant tank : MULLER COMBILOOP CL2 * with high-pressure pump : 100 [bars] - Bar loader : IEMCA BOSS 338 HD / 32 LL - Electric transformer

Condition: new, The new vacuum pump is available from stock and ready for immediate use. We recommend that it is only installed by trained personnel. Adaptation material available on request. Oil filling: without Technical data: 2.7 kW 3 x 230/400 V 50 Hz 1500 rpm Oil return suction in non-return valve housing Gas ballast Incl. level switch Final pressure: 0.1 mbar Iodpfx Ajttzxrjdnsa Subject to prior sale! This offer is only valid for customers within Germany and in European countries!

Condition: used, Year of construction: 2010, functionality: fully functional, turning length: 300 mm, turning diameter over cross slide: 20 mm, turning diameter: 20 mm, spindle speed (min.): 10,000 rpm, spindle speed (max.): 10,000 rpm, spindle bore: 20 mm, rotational speed (max.): 10,000 rpm, power: 30 kW (40.79 HP), Turning and milling center complete with bar feeder LNS HYDROBAR MINI SPRINT bar loader(Maximum bar length 3,000mm) DMG MORI SPRINT 20-8 Control: Fanuc 310i Main spindle speed: 10.000 rpm Power: 5,5 kW torque: 14 Nm bar passage: max. 20 mm C1 axis: 0.001 travel Z1 axis: 80 mm Counter spindle speed: 10.000 rpm power: 5,5 kW torque: 14 Nm C2 axis: 0.001 Travel X2 / Z2 axis: 240 / 300 mm rapid traverse in X2 / Z2 axis: 40 m/min Tool carrier I (X/Y) Technology: Linear slide Internal machining: 6 stations tool holder: 20 mm External machining: 6 stations Tool holder: 12 x 12 mm Driven tool stations: 5 Tool drive: 3,450 / 6,000 rpm Tool holder: collet chuck, ESX 16 Travel in X/Y axis: 50/350 mm Rapid traverse in X/Y axis: 40/30 m/min Tool carrier II (Y) Technology: Linear slide internal machining: 4 stations tool holder: 20 mm Iedpoq Nmm Eefx Adnoa External machining: 4 stations Tool holder: 12 x 12 mm Driven tool stations: 5 Tool drive: 3,450 / 6,000 rpm Tool holder: collet chuck , ESX 16 Travel in Y2 axis: 120 mm rapid traverse in Y2 axis: 40 m/min MACHINE DETAILS weight: 4200 kg Connected load: 30 kVA Operating voltage: 400 V / 50 Hz EQUIPMENT Chip management: chip conveyor Coolant management: Coolant pump Fire extinguishing system: Kraft + Bauer Oil mist extraction: Interface prepared Further equipment: Signal lamp

Condition: excellent (used), Year of construction: 2018, Index G220 CNC Mill Turn Mfd. 2018 (Demonstration Machine)  Recommissioning 2021 Control: Siemens 840D Solution Line, few production hours Main spindle D90 Counter spindle D90 Clamping pressure device 8 to 80 bar Upper tool carrier with motor milling spindle HSK-T63 Axes X, Z, Y and B Tool carrier 2 with X, Y, Z-axis and turret head with 12 stations VDI30 Tool changer with chain magazine double-row HSK holder 2 x 50 HSK 63 Tool management type "Milling machine" with relative D-number Cooling unit Automatic work door Light barrier for drill breakage control 5-axis simultaneous machining for motor milling spindle Motor current-based tool monitoring system Management of tools with setup dialog (max. 250 tools) Workpiece measuring on main or counter spindle Measuring cycles Follow-up center for cross slide 2 Tailstock function in the counter spindle Electronic shaft Grinding cycles Chip conveyor Ijdpfjw Tfansx Adnoa Filter Coolant system ECO-Fluid 3 pumps 3, 8, 20-80 bar UNIMAG4 Portal removal device Transport belt No clamping devices, no tool holders, ex location

Condition: excellent (used), Year of construction: 2008, X/Y/Z travel: 900 x 400 x 200 mm Table size: 800 x 400 mm Iodpjv Irwrefx Adnsa

Condition: ready for operation (used), Year of construction: 2022, Professional version, laser power: 1500W, integrated pilot laser, wavelength (nm): 1075 ± 5, programmable slots: 9, W-LAN. The condition is as good as new. Iodjrwzruepfx Adnoa