Pinacho Taurus 260

Pinacho Taurus 260

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, turning diameter over cross slide: 310 mm, turning length: 1,600 mm, turning diameter: 520 mm, spindle bore: 80 mm, spindle speed (max.): 2,500 rpm, Pinacho CNC lathe, Taurus-260 x 1500mm, equipped with a Fagor 8055 CNC control. Swing over bed: 520mm, swing over cross slide: 310mm, spindle bore: 80mm, variable speeds from 0-2500 rpm. The lathe features a universal 3-jaw chuck with a diameter of 250mm and a manual quick-change tool turret, and is equipped with a fixed steady rest. All bearings of the main spindle and tensioners have been replaced with new ones. The lathe is in very good condition. Gedpfjzmp Etox Angjuh

Condition: used, Year of construction: 2005, Injection molding machine Manufacturer: Krauss Maffei Type: KM350 /1900 C2 Year of construction: 2005 Clamping force: 3,500 kN Tool opening force: 220 kN Drive force of movable platen: opening: 105 kN closing: 95 kN Platen size (h x v): 1,060 x 1,095 mm Clear opening (h x v): 710 x 710 mm Tool opening stroke: 920 mm Minimum tool mounting height: 380 mm Opening width: 1,300 mm Ejector stroke: 250 mm Ejector force front/rear: 95 / 48 kN Pump motor: 75 kW Installed heating capacity: 30 kW Control zones for cylinder heating: 6 Dry cycle rate: 1,550 1/h Oil capacity: 720 l Dimensions and weights: Net weight with control cabinet: approx. 16.0 tons L/W/H: 6,510 x 2,040 x 2,380 mm Maximum tool weight: 4,780 kg Injection unit: Working capacity: 1900 Screw diameter: 70 mm Injection pressure: 1,778 bar Displacement: 1,047 cm3 Shot weight for PS: 953 g Injection rate: 527 cm3/s Screw speed standard / option: 1/min 285/349 Screw speed standard or stage 1: 95 PS Screw speed option or stage 2: 117 PS Nozzle system force: 82 kN Fully hydraulic 2-platen clamping system PV control for injection unit MC4 32-bit microprocessor control Integrated control panel with TFT color screen and Floppy disk drive (3.5 inch) for data backup Gujdpsxu Uvaofx Angsh Plasticizing: 1 complete thermoplastic plasticizing unit in wear-resistant design, screw diameter 70 mm with backflow preventer and open nozzle Nozzle radius: 15.00 mm Nozzle bore: 6.00 mm 121026

Condition: good (used), Year of construction: 2018, Burning and Drilling System Plate Processing Center Manufacturer: Vernet-Behringer Type: MAG EVO 420 Year of construction: 2018 CNC control Power source: Kjellberg HiFocus 360 Plasma cutting for material thickness: 5 to 50 mm Spindle speed: 160 – 4,000 rpm Automatic turret Tool holder: 14 Drive power: 16 kW Drilling diameter: 5 - 40 mm V-scoring for marking: 5 to 40 mm Sheet metal dimensions min.: 1,500 x 300 mm (750 x 400 mm with limitations) Gedpfx Ajvzrczengouh Minimum dimensions of finished parts: 80 x 80 mm Sheet metal weight max.: 2,600 kg and 650 kg/m Infeed side: Roller conveyor for flat steel or plates: 4,000 x 2,000 mm Zero-point transverse conveyor Number of carriages: 2 clamps NC feed carriage, positioned to the side 4 clamping jaws (2+2) 3 short-stroke transverse conveyors Working height: 1,000 mm Outfeed side: Outfeed roller conveyor with a lowerable discharge table with a chute into a material collection container for unloading small parts. Filter unit incl. piping Powerful for use with carbide tools. For drilling, tapping, marking, milling, plasma cutting of flat steel and sheets. Software options for milling and scoring LANTEK license 121026ä Availability: immediate!

Year of construction: 2014, condition: ready for operation (used), A conveyor system is available for the transfer of Euro pallets to a warehouse automation, suitable for weighing, barcode scanning of the pallet, optional film wrapping, measuring, output to two output places or in case of error to a separate place, with pallet wrapper C&C group C-ONE EXTREMA, pallet dimensions: 1200x800mm, max. pallet weight: 1t, including documentation, control cabinets and accessories. Guodpolcdf Defx Angsh

Condition: ready for operation (used), Year of construction: 2010, pressure 160 t chamfer lenght 4100 mm distance between columns 3600 mm column arm 400 mm ram stroke speed 200 mm/sec work speed 10.0 mm/min return speed 165 mm/sec work stroke ca. 350 mm dayligth ca. 660 mm oil volume 450 ltr. table height 830 / 950 mm table width 75.0 / 60.0 mm voltage 400 Volt total power requirement 18.5 kW weight 13440 kg range L-W-H 5150 x 2050 x 3150 mm current new price approx. 90.000 euros Gedpfx Anoxaambjgsuh special price on request ----- ULTIMA PLUS electro-hydraulic press brake with: * increased installation height .. approx. 660 mm * increased cylinder stroke .. approx. 350 mm ----- - in checked condition - machine video - ?v=chgCaXLnpa8 Equipment: - CNC electro-hydraulic die/press brake - CYBELEC CNC control "DNC 880 S" * swiveling control panel, front right * 2D graphic programming & product display * tool & program library - CNC controlled axes: Y1 + Y2 + X + R axis - CNC electro-motorized back stop, with ball screws (X axis) - CNC electro-motorized Height adjustment of the stop beam (R axis) - 2x manually adjustable back stop fingers (Z axis) - 2x front, movable support arms with T-slot ("Sliding System") - 1x set of bending/insert tools * AMADA / SYSTEM A tool system - Laser protection device in front of the machine - Safety device behind the machine (door) - 1x freely movable foot switch - original operating instructions

Condition: good (used), functionality: fully functional, Year of construction: 1998, sheet thickness (max.): 13 mm, sheet thickness steel (max.): 13 mm, back gauge: 1,000 mm, back gauge travel distance Z-axis: 1,000 mm, overall weight: 18,400 kg, total length: 4,400 mm, total width: 2,350 mm, total height: 2,250 mm, cutting length (max.): 4,100 mm, Equipment: finger protection, safety light barrier, Cuttinglength: 4.100 mm Cutting thickness: 13 mm Back gauge: 1.000 mm Control: Darley Delem Featured with: - Sheetsupporters frontside 4000 mm Godswc Sahspfx Angjuh - Footpedal - Material conveyor - Extra sets knives - Documentation Country of origin: The Netherlands Motor power: 30 kW Machine LxWxH: 440 x 235 x 225 cm Machine weight: 18.400 kg

Condition: used, functionality: fully functional, machine/vehicle number: E00801629S, Year of construction: 1997, operating hours: 14,410 h, load capacity: 32,000 kg, lifting height: 4,350 mm, fuel type: diesel, mast type: simplex, construction height: 4,370 mm, fork length: 2,400 mm, empty load weight: 40,000 kg, drive type: Diesel, Heavy duty forklift truck - Diesel Chassis number: E00801629S Load center: 1200 Guedpfx Aeuh Arnsngjh Fork width: 300 mm Fork thickness: 120 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: Normal Front tires type: Air Front tires Size: 16.00-25 Front tires Condition: 40 - 60% Rear tires Type: Air Rear tires Size: 16.00-25 Rear tires Condition: 20 - 40% Description: In addition to this FABRICAT MODEL, we also have approx. 150 heavy-duty forklifts, container stackers, reach stackers, forklift trucks & terminal tractors in our Oldenburg warehouse. Visit our homepage - hinrichs-Forklifts. Leasing, installment plan & financing at fair conditions are possible for us at any time. We are also happy to buy your used vehicle free of charge, even without you purchasing a vehicle from us. Give me a call Marco Levermann, I will be happy to advise you in detail about this FABRICAT MODEL. By the way: Our specialist forklift workshop specializes in the repair and overhaul of large trucks from 8 tons upwards. We are also happy to display your vehicle for sale on consignment. With Coil or Forks 2,40m both available.

Condition: used, Year of construction: 2015, functionality: fully functional, overall weight: 1,500 kg, # PILOUS ARG 500 plus S.A.F. The PILOUS ARG 500 plus S.A.F. is a heavy-duty horizontal band saw designed for the precise and efficient cutting of metal profiles, solid materials, pipes, and structural sections. The machine is suitable for industrial applications and offers adjustable blade speed, hydraulic clamping, and a robust construction for reliable long-term operation. ### Technical Specifications * Model: PILOUS ARG 500 plus S.A.F. * Blade dimensions: 6040 × 41 × 1.3 mm * Blade speed: 15–90 m/min * Main motor: 400 V, 50 Hz, 4 kW * Pump motor: 400 V, 50 Hz, 0.12 kW * Hydraulic motor: 400 V, 50 Hz, 0.55 kW Gujdpfx Anjzvhw Tsgoh * Working height of vice: 870 mm * Hydraulic system oil capacity: 26 l * Hydraulic oil: ISO 6743-4/HM, DIN 51524 Part 2-HLP * Coolant tank capacity: 35 l * Machine dimensions, minimum: 1410 × 2370 × 1580 mm * Machine dimensions, maximum: 2000 × 2800 × 2150 mm * Machine weight: 1530 kg ### Cutting Capacity | Cutting angle | Round material | Square material | Rectangular material | | ----- | -----: | -----: | -----: | | 90° | Ø500 mm | 450 mm | 620 × 450 mm | | 45° | Ø500 mm | 440 mm | 440 × 450 mm | | +45° | Ø500 mm | 440 mm | 430 × 450 mm | | ±60° | Ø350 mm | 310 mm | 310 × 400 mm | The PILOUS ARG 500 plus S.A.F. combines high cutting capacity, variable blade speed, and hydraulic operation, making it a suitable solution for demanding industrial metal-cutting applications.

Condition: new, bending length: 2600sheet thickness: 30upper roll diameter: 390 Technical specifications: Gedsd Ab Sxepfx Angeuh - Hardened and polished rolls - Conic bending device - Digital readout for side rolls - Complete body made of ST-52 Steel - Portable control panel separated form machine - Rolls are mounted with bearings - Top roll cover, openable and closeable by hydraulic, controlled from control panel. - All rolls are driven by hydraulic motor and planetary gearbox - Side rolls upwards downwards movements are hydraulic powered Options: - variable rotation speed EURO 4.682.00 Material feed table on request Oil cooler EURO 1,040.00 Center support EURO 13.600,00 Side supports EURO 9.450.00 We have many references!