CNC Turning- and Milling Center

PFIFFNER-MANURHIN KMX-XL32

Condition: ready for operation (used), Year of construction: 2001, operating hours: 58,134 h, functionality: fully functional, machine/vehicle number: 25 03 - 01104608, turning length: 330 mm, turning diameter: 33 mm, rotational speed (max.): 8,000 rpm, feed length X-axis: 70 mm, feed length Y-axis: 225 mm, feed length Z-axis: 140 mm, Equipment and axis systems Turrets: 3 units with driven tools Gantry: 1 unit with driven tools C-axes: main and sub spindle with C-axis TECHNICAL DETAILS Turning diameter: 33 mm Turning length: 330 mm Number of axes: 17 Controller: SIEMENS 840D Main Spindle Working area – max. bar capacity: Ø 32 mm Headstock travel: 350 mm Spindle bore: Ø 37.5 mm Spindle drive – AC motor power (100/40%): 8 / 12.5 kW Max. spindle speed: 8,000 rpm Spindle movement: left and right Spindle Feed Max. feed rate: 18 m/min Torque: 10.5 Nm Max. speed: 3,000 rpm Max. thrust: 3,000 daN Turret Heads (3 units) Rotary drive: gear motor Torque: 25 Nm Hydraulic locking – force: 2,500 daN Number of stations: 8 Tool clamping: VDI 30 Number of rotating tools: 4 Tool speed: 7,500 rpm Drive Motor power (100/40%): 5.5 / 7.5 kW Direction of rotation: left and right C-axis: included Feed Feed rate: 30 m/min Rated torque: 10.5 Nm Max. speed: 1,500 rpm Max. thrust: 3,000 daN Cross-Slide X1 – U1 Number of cross-slides: 1 Cross-slide travel: 70 mm Max. feed rate: 18 m/min Rated motor torque: 6 Nm Max. motor speed: 3,000 rpm Max. thrust: 500 daN Rear Tool Slide Number of slides: 2 U1 Slide travel: 70 mm Y1 Slide travel: 225 mm Lodpfswm I Ntox Ad Nehb Max. feed rate: 18 m/min Number of stations: 6 Tool section: 20 x 20 Max. thrust: 500 daN Rated torque: 6 Nm Number of rotating tool holders: 1 / 4 Motor drive: 8,000 rpm Motor torque: 4.2 Nm Max. speed single spindle ER32: 2,000 rpm – 12.6 Nm 1 modular double spindle ER20: 6,000 rpm – 4.2 Nm 1 modular double spindle ER20: 8,000 rpm – 3.2 Nm Cross-Slide Number of slides: 2 X2 cross-slide travel: 140 mm Z2 feed slide travel: 120 mm Max. feed rate: 18 m/min Max. thrust on X2: 500 daN Rated torque: 6 Nm Max. thrust on Z2: 900 daN Rated torque: 10.5 Nm Turret Slide X3 Number of slides: 1 Travel: 80 mm Max. feed rate: 18 m/min Rated motor torque: 6 Nm Max. motor speed: 3,000 rpm Max. thrust: 500 daN MACHINE DETAILS Supply voltage: 3 x 400 V – 50 Hz Total power consumption: 30 kVA Continuous sound pressure level at workplace – machine only: 76 dB(A) Machine Dimensions Machine weight: approx. 6 t Space requirement: approx. 3,850 × 2,000 × 2,100 mm Operating Data Operating hours: 58,134 h EQUIPMENT - Bar loader - Equipment and axis systems - Turrets: 3 units with driven tools - Gantry: 1 unit with driven tools - C-axes: main and sub-spindle with C-axis

Condition: new, sheet thickness steel (max.): 4 mm, - Capacity 4 mm - Adjustment of the hydraulic roller - foot switch - Brake motor - With 4 roller sets - Emergency stop - 400V Lhsdpsgg Nq Hjfx Ad Neb

Year of construction: 1969, condition: ready for operation (used), Max. grinding depth: 80mm, distance spindle table: 145mm, spindle bore: 28mm, connected load: 7kW, length: 2100mm, width: 1400mm, height: 950mm, weight: 1.6t, with documentation, an inspection is possible. Lhsdpjqzkdmjfx Ad Njb

Condition: good (used), Year of construction: 1988, voltage 380 V connected load 7,5 kVA dimensions 2725 x 1930 x 1773 mm weight of the machine ca. 2500 kg --> Technical data Main data: --> Table surface: 605 x 300 mm --> Table longitudinal movement max. (manual): 750 mm --> Table transverse movement: 340 mm --> Grinding height between table/new grinding wheel min/max: 22.5 / 322.5 mm --> Standard size of magnetic clamping plate: 600 x 300 mm --> Workpiece weight incl. magnet: 420 kg --> X-axis / longitudinal movement: --> T-slots (number x width): 3 x 17 mm --> Table feed, hydraulic: 0.3 - 25 m/min --> Travel per handwheel revolution: 47 mm --> Y-axis / height movement: --> Automatic vertical feed - coarse in 12 steps: 0.001 - 0.03 mm --> Automatic vertical feed - fine in 8 steps: 0.001 - 0.01 mm --> Distance per handwheel revolution (x1/x10): 0.1 / 1.0 mm --> Graduation on handwheel (x1/x10): 0.001 / 0.1 mm --> Trigger strokes: 0 - 5 --> Rapid traverse: 400 mm/min Lhsdpfjw Dvkasx Ad Nob --> Z-axis / transverse movement: --> Automatic transverse feed intermittent: 0.5 - 20 mm --> Automatic transverse feed / rapid traverse continuous: 0.1 - 1.0 m/min --> Distance per handwheel revolution: 5.0 mm --> Scale mark on handwheel: 0.02 mm --> Standard grinding wheel: --> Ø x width: Ø 355x38 (50) mm --> Bore: Ø 127 mm --> Speed: 1500 rpm --> Accessories Various grinding wheels --> Documentation

Condition: used, Year of construction: 2012, x-travel 1.035 mm y-travel 560 mm z-travel 510 mm CNC-control HEIDENHAIN TNC620 table-size 1200 x 560 mm max. table load 1000 kg spindle taper SK 40 Ljdpfx Adjw A Spvs Nohb spindle turning speed range 10.000 U/min drive capacity - spindle motor 13 kW feed stepless 20.000 mm/min rapid traverse 25 m/min tool change unit 20 Pos. coolant IKZ 20 bar voltage 400 V total power requirement 17 kVA weight of the machine ca. 4,1 t dimensions of the machine ca. 2,55 x 2,30 x 2,25 m chip conveyor 3,90 x 0,95 x 1,60 m - Serial No.: 1539000377A - Machine ON: 21.689 h - Program Run: 9.021 h - CNC-Control: Heidenhain TNC620 - elektronic hand wheel - chip conveyor - coolant through spindle 20 bar

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, center height: 150 mm, total length: 620 mm, Mechanics: All wear parts of the machine are replaced, including the infeed spindle in the X-axis. All assemblies are restored to as-new condition. After the overhaul, the machine is comparable to a new machine. Geometry: The machine is completely dismantled down to the guides. Before the geometry of the individual tables and assemblies can be restored, both guides of the X and Z axes are scraped by hand and restored to as-new condition. After completion, the machine receives a measurement report in accordance with the manufacturer's specifications. Painting: Once the geometry of the machine has been restored, it is prepared for repainting. All housings, tables and the machine bed are stripped of old paint, cleaned and repainted. Ledeurw Uyspfx Ad Nshb Hydraulics: The entire lubrication system, including the lubrication unit, is replaced. The hydraulic unit is also completely overhauled. Conventional internal cylindrical grinding machine TSCHUDIN HTG 610I Equipment of the machine: Technical data: Center height: 150 mm Center width: 680 mm Grinding length: 620 mm Weight and space requirement of the machine: 2500kg // 2340x1445x1900 mm Machine equipment (standard): 1 pc. Workpiece headstock MK5 1 pc. Control panel 1 pc. Holder for internal grinding spindle 1 pc. Speed control unit for belt spindle (UJ50 / UJ80) FISCHER 1 pc. Hydraulic unit Optional: - Digital measuring system 2-axis - Freely adjustable speed (1-800 rpm) incl. soft start (higher speeds are optionally possible after clarification of technical details) - Separate low speed for part alignment

Condition: good (used), max. wheel diameter 180 mm gear width 58 mm max. module 4 Lodpfx Adsuayw Se Njhb min. module 0,5 strokes per minute 200 - 710 total power requirement 3 kW weight of the machine ca. 3 t Very good condition, change gears,... Year of construction: Approx. 1964

Condition: excellent (used), New 2006 Brother CNC-B00 Control Pallet Change time 3.4 seconds Pallet Size 600 x 425mm X axis 550mm Y axis 400mm Z axis 415mm Spindle speed 12000rpm Lhjdpfx Adjrfxr Ue Nsb 40 Station ATC BT30

Condition: used, Year of construction: 1986, grinding diameter 350 mm grinding length 600 mm centre height 175 mm Very well maintained machine. The machine comes from a precision grinding shop from the Black Forest. Can still be viewed under power for a short time at the seller's premises. In 2022, the machine was partially overhauled and serviced in-house with production of the geometry according to the manufacturer's protocol. Equipment: -2-axis digital readout FAGOR -sine bar -tailstock with fine adjustment -Hydraulic tailstock -Surface grinding device -Internal grinding device -Fischer UJ70 internal grinding spindle -Paper belt filter -automatic sequence: roughing-finishing-firing-retur Ljdpfsv Tqqnex Ad Njhb Translated with (free version)

Condition: used, max. wheel diameter 180 mm gear width 45 mm max. module 4 min. module 0,5 stroke length max. 0 - 52 mm spindle taper innen MK 4 table diameter 160 mm Lhsdpfeu Uu S Tex Ad Neb table bore diameter 75 mm no. of strokes 355 - 630 Hub/min feed range 0,008 - 0,4 mm/Hub dimensions of the machine ca. 2,30 x 1,50 x 2,36 m power capacity 6 kW weight of the machine ca. 2.500 kg Year of construction: Approx. 1970