Band saw

PEGAS-GONDA 510X510 HERKULES X

Condition: used, TECHNICAL DETAILS - Bar diameter : Ø 5 à 80 [mm] - Bar length : 250 à 1615 mm [mm] - Supply voltage : 400 [V] Nsdev R Hw Sepfx Ahkoda - Machine weight : 500 [kg]

Condition: new, Year of construction: 2023, cutting diameter 350 mm saw band length 4640 x 34 x 1,1 mm table height 860 mm 350 mm 15 - 100 m/min 4,0 kW 2800 kg 2200 x 3200 x 2200 mm Display Model Current list price: 55,910 euros Fully automatic band saws with a two-column guide system for production cuts, particularly in materials that are difficult to machine and solid stock. With this machine, MEP offers you a machine that is at the highest technical level and, thanks to the use of the highest-quality materials, features an unmatched, robust, and torsionally rigid structure. An extremely robust saw frame made of gray cast iron provides the necessary stability, which leads to impressive cutting results, and the sturdy gray cast iron columns on which the saw frame glides via preloaded linear guides ensure ensure the highest cutting precision even under maximum load. The modern machine control system (MEP NC 5.0) offers the user maximum ease of operation and ensures trouble-free operation. (Monitoring/Evaluation/Correction in real time) MAXIMUM PERFORMANCE > The two operating modes (semi-automatic and automatic) enable efficient cutting under all conditions. > The control system allows for the storage of up to 100 cutting programs, each with different quantities and lengths, and minimizes programming time for frequently executed jobs. > The automatically detected starting position of the saw head reduces the setup time. > The saw headâ??s feed via linear guides driven by hydraulic cylinders with preloaded ball screws ensures reduction of mechanical vibrations during cutting and greater stability. > The automatic alignment of the front saw blade guide head based on the dimensions of the bars to be cut reduces processing time. > Saw blade tension is controlled by the brushless motor and is constantly monitored and automatically adjusted to the set minimum value. EXTREMELY FLEXIBLE Ndodpfx Ahelf Tu Ujkja > The feed system, with a 600 mm stroke, is repeatable and cuts all lengths. > The vertical roller pair allows for holding and aligning any type of bar or bundle that is fed into the machine. > The vector drive for stepless adjustment of the blade speed from 15 to 100 m/min enables the cutting of any material. > The motorized chip conveyor can be mounted to the right or left of the cutting area . FEATURES: Fully automatic control â?? NC 5.0 - Innovative (Windows CE-based) touchscreen control with additional soft- touch buttons for frequently used functions -USB port -Joystick for manual control of the axes (X-Y) -Controlled head descent with automatic compensation via a servo valve , constant monitoring of the preselected torque 4, and with precise feed rate adjustment in millimeters per minute 5 -Adjustment/preselection of the continuously variable band speed in m/min. -Band saw tension with tension monitoring and display via an electronic converter -Automatic detection of the start of the cut -Large 7" color touchscreen for displaying and selecting all machine functions and parameters, and programming in seconds. Display of detailed alarm and error messages -Numerous special functions, including executing various lengths and quantities (10 programs) as a sequence, clean cut, step-by-step execution, and much more. -Sturdy, torsion-resistant, and low-vibration saw frame made of cast steel -Carbide band guides for maximum cutting precision, hinged for easy saw band replacement -Large, adjustable cast steel idler ...

Condition: used, Year of construction: 2017, x-travel 1.100 mm y-travel 610 mm z-travel 610 mm Control Heidenhain table dimensions 1.100 x 610 mm number of tool places 40 Pos. tool taper SK 40 auto power on hours ca. 20.432 h spindle hours ca. 6.642 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Ndsdpfoyn R Ndjx Ahkea The main spindle has been reconditioned. Accessories, tools, and work-holding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: good (used), Bar feeder, automatic bar loader for CNC lathe, brand Iemca, model Kid 80, year 2016. Nedpfx Ahsy N R Ttjkjda

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: 140014, travel distance X-axis: 760 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 8,000 rpm, spindle mount: MK 4, table length: 1,270 mm, table width: 305 mm, total height: 2,390 mm, total length: 2,170 mm, total width: 2,510 mm, overall weight: 2,500 kg, workpiece weight (max.): 200 kg, controller model: Siemens 828 D, Equipment: documentation/manual, rotational speed infinitely variable, For sale is a CNC milling machine, model V 760 L by MMD. The machine has been in single-shift operation since 2014 and shows normal signs of use. However, it is fully functional and continues to work precisely and reliably. Technical specifications: Control: Siemens 828 D Automatic tool changer 3D probe included Automatic tool measurement The machine is powered on and can be inspected under operation at any time. Condition: Used, well-maintained, technically flawless. Regularly serviced, immediately ready for use. Year of manufacture: 2014 Njdpexnnb Nsfx Ahkjda Operation: Single-shift operation Inspection and test run possible by appointment.

Condition: like new (used), Semi-automatic, electro-hydraulic band saw Blade dimensions: 2950x27x0.9mm The saw is suitable for cutting solid metals and metal profiles with medium cross-sections up to 280x200 mm at an angle of 0°; Cutting angle range: from 0° to 60° to the left; WITH ADDITIONAL EQUIPMENT - manual and manually dynamic cutting cycle Ndjdpozlimbofx Ahksa Year of manufacture: 2025

Condition: reconditioned (used), Year of construction: 2015, Used automatic hydraulic band saw for metal MEP Shark 230 nc hs 5.0 Ndsdstva Nhspfx Ahkea Automatic auger chip remover Blade size: 2950x27x0.9 Choice of cutting speed with inverterr: from 15-100 m/min Capacity: round 230mm, square 230x230mm Year: 2015 Possibility of cuts also in semi-automatic mode The machine has been fully serviced, the following parts have been replaced: all bearings, reducers, both wheels (pulleys) leaf, hard metal plates in guides, main shaft, coolant pump, two jaws, coolant pipes,yojstick, fans and other consumables.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, operating hours: 10 h, power: 1.5 kW (2.04 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 260 mm, cutting width (max.): 280 mm, control type: PLC-controlled, roller diameter: 260 mm, pivoting range: 60 °, actuation type: electric, rotational speed (max.): 15 rpm, rotational speed (min.): 100 rpm, total height: 1,780 mm, total length: 1,900 mm, total width: 1,050 mm, overall weight: 420 kg, table height: 795 mm, year of last overhaul: 2026, saw band length: 2,970 mm, saw blade speed: 100 rpm, saw blade width: 27 mm, number of digital displays: 1, Equipment: CE marking, cooling unit, documentation/manual, motor brake, rotational speed infinitely variable, PEGAS 260×280 SHI-LR Semi-Automatic Metal Band Saw ✓ Machine sold directly by the manufacturer ✓ Manufacturer's showroom demonstration machine ✓ Now available for sale ✓ Machine sold directly by the manufacturer ✓ 6-month warranty ✓ Service and spare parts provided by the manufacturer ✓ Regularly inspected and professionally maintained ✓ Heavy-duty cast iron construction ✓ Inspection and test run available before purchase Ndsdpfx Ahszhm Eaokea ✓ Available for immediate delivery Technical Specifications Maximum cutting capacity (round): 255 mm Maximum cutting capacity (rectangular): 280 × 250 mm Continuously adjustable mitre cutting: 60° right to 45° left Semi-automatic hydraulic operation Variable blade speed: 20–100 m/min Motor power: 1.5 kW Saw blade dimensions: 2720 × 27 × 0.9 mm Hydraulic material clamping vice Hydraulic saw head feed and return Coolant system Power supply: 3 × 400 V / 50 Hz Machine weight: approx. 420 kg Built for Daily Industrial Use The PEGAS 260×280 SHI-LR is a semi-automatic band saw designed for both single-piece and small-batch production. The machine is suitable for straight and mitre cutting of structural steel, stainless steel, tool steel, solid bars and profiles. Angle cutting is continuously adjustable from 60° to the right and 45° to the left. All major load-bearing components are manufactured from high-quality cast iron, providing exceptional rigidity, vibration damping, high cutting accuracy and a long service life. The saw head is inclined at 25°, reducing blade wear and extending blade life. The hydraulic semi-automatic cycle controls material clamping, cutting, saw head return and vice opening, while material loading is performed manually. Feed pressure and cutting feed rate are easily adjustable for optimum cutting performance. Inspection and Test Run The machine can be inspected and tested under working conditions at the manufacturer's premises in Slavkov u Brna, Czech Republic. If you are interested, please contact us. We will be happy to demonstrate the machine and answer any questions you may have.

Condition: like new (used), Year of construction: 2024, machine/vehicle number: 5401501006, functionality: fully functional, operating hours: 125 h, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 500 mm, cutting width (max.): 560 mm, roller diameter: 550 mm, actuation type: electric, rotational speed (max.): 150 rpm, rotational speed (min.): 15 rpm, total height: 2,522 mm, total length: 4,116 mm, total width: 2,030 mm, overall weight: 3,790 kg, table height: 810 mm, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, lighting, rotational speed infinitely variable, PEGAS 540 CALIBER A-CNC – a fully servo-driven bandsaw for metal, equipped with ball screws for the working movements of the saw arm and the feed for the divided bar stock. This is a demonstration and exhibition machine from the manufacturer PEGAS-GONDA. The saw has only been used at trade fairs and demonstration events between 2024 and 2026. The control system records only 125 operating hours. Main parameters: * automatic CNC bandsaw for metal * cutting capacity up to Ø 550 mm * automatic material feed * SIEMENS S7-1500 control system and complete servo drive for all movements by SIEMENS * touchscreen control and program storage * smooth belt speed control * robust industrial design for series production Nodpfx Aezkcafshksda The machine is in virtually new condition, fully functional, and ready for immediate use. Original price of a new machine: 85,712 EUR excluding VAT Selling price: 29,950 EUR excluding VAT Inspection and demonstration are possible at the production facility in Slavkov u Brna by appointment. We would be happy to supplement the offer with roller conveyors with a load capacity of up to 2000 kg per meter.

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 022115SB01, bar length: 3,300 mm, total length: 4,292 mm, total width: 1,196 mm, total height: 1,730 mm, overall weight: 2,130 kg, It was fitted to the Biglia B620 (with a spindle length of 1150 mm) – 71 mm guide channels – 70.5 mm bar pusher – 9 bushings (6-20-26-28-32-42-46-52-58 mm). Ndedpjzg Eu Refx Ahksa