Band saw

MEP SHARK 281 SXI EVO

Condition: reconditioned (used), Used semi-automatic bandsaw MEP Shark 281 sxi evo Three operating modes: semi-automatic, manual, and manual dynamic (gravity) Blade dimensions: 2950 x 27 x 0.9 mm Two blade speeds: 36/72 m/min Max vice opening: 285 mm Rcodpfx Aeyyn Suohcsf Cutting capacity: at 0° round 250 mm, rectangle 280x200 mm at 45° round 190 mm, rectangle 180x180 mm at 60° round 120 mm, rectangle 110x110 mm Year: 2006 Weight: 435 kg Fully serviced.

Condition: used, Metal band saw Hans Schreiner MBS270, good condition, 1.5 kW, 2450 mm band length, 227 kg Redpswzzgnefx Ahcocf Subject to price changes, errors, printing and typographical mistakes excepted.

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm turning speed range: 36 / 72 m/min dimensions of saw-band 2950 x 25,4 x 0,9 mm weight of the machine ca. 0,4 t Dimensions (LxWxH) 1,5 x 0,9 x 1,5 Semi-automatic function: Vice closes and motor starts, saw head lowers for the cut, motor switches off, saw head rises, Vise opens. Some features: Rcodpfx Asfg E H Rshcjf New centralized switch console on an articulated arm. Latest generation hydraulic control unit, highly powerful and with low energy consumption. Base frame with pull-out coolant container. The machine complies in all areas CE regulations!

Condition: new, 36/72 m/min 285 mm capacity 90 degrees: round 250 mm capacity 90 degrees: square 230 mm capacity 90 degrees: flat 280x200 mm capacity 45 degrees: round 190 mm capacity 45 degrees: square 180 mm Rcedpfx Aheyv Nfujcof capacity 45 degrees: flat 180x180 mm capacity 60 degrees: round 120 mm capacity 60 degrees: square 110 mm capacity 60 degrees: flat 110x110 mm dimensions of saw-band 2950 x 27 x 0,9 mm output 1,5 / 1,8 kW Weight 435 kg dimensions 1700x1000x1840 mm Semi-automatic function: - Vice closes and engine starts - Saw head lowers for the cut - Engine shuts off - Saw head lifts - vise opens

Condition: used, functionality: fully functional, power: 85 kW (115.57 HP), fuel type: diesel, empty load weight: 7,700 kg, lifting height: 6,900 mm, mast type: telescopic, Year of construction: 2022, operating hours: 345 h, total length: 4,970 mm, construction height: 2,380 mm, fork length: 1,200 mm, drive type: Diesel, load capacity: 3,300 kg, construction width: 2,390 mm, Rigid telescopic forklift Mast type: Telescopic Rcsdpfx Ahou Dyftocof Speed class: 20 Technical condition: very good Front tires Type: Pneumatic Front tires Size: 500 80 24 Front tires Condition: 80 - 100% Rear tires Type: Air Rear tires Size: 500 80 24 Rear tires Condition: 80 - 100% Description: Are you looking for an efficient, powerful and comfortable machine? Then the MLT 733 with at least 115 HP, the telescopic handler designed for agricultural transport work with a lifting height of 6.88 m and a lifting capacity of 3.3 t, is made for you! Top priority comfort: This machine is characterized by a completely new, easily accessible cab with optimum visibility, the JSM® (Joystick Switch and Move) with adjustable armrest, DSB (Double Switch Buttons) and sound insulation ideal for long working hours. Top priority performance: With this telehandler, you can achieve exceptional results thanks to the 115 hp Deutz engine and torque converter transmission. Its self-locking differential, 41 cm ground clearance and automatic spiral fans are perfectly adapted for agricultural use. Top priority efficiency: The MLT 733 with at least 115 hp is equipped with a variable displacement pump (up to 150 l/min) 3rd valve, rear working lights, front working lights, air conditioning,

Condition: new, Model Name Shark 281 SXI evo Rjdpogvkglsfx Ahcecf

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 200 mm capacity 90 degrees: square 230 x 230 mm capacity 45 degrees: round 190 mm capacity 45 degrees: flat 180 x 180 mm capacity 45 degrees: square 180 x 180 mm capacity 60 degrees: round 120 mm capacity 60 degrees: square 110 x 110 mm capacity 60 degrees: flat 110 x 110 mm vice 285 mm turning speed range: 36 + 72 m/min dimensions of saw-band 2950 x 27 x 0.9 mm Control MEP NC coolant tank 95.0 l total power requirement 1.5 / 1.8 kW weight of the machine ca. 435 kg dimensions of the machine ca. 1000 x 2000 mm Features: - Robust electro-hydraulic semi-automatic band saw (INDUSTRY) - With miter cuts up to 60° - MEP EVO microprocessor control for controlling all functions * Front right, rotatable - Optional manual or automatic saw bow lowering * Continuously adjustable saw bow lowering - Saw blade guide made of carbide plates - Hydraulic saw blade tensioning - including digital value display - 2 saw blade speeds - 1 bi-metal saw blade - Coolant system - 1 angle stop - Chip removal brush - Machine base with forklift pockets - Operating instructions in German Functioning of semi-automatic operation: Rodpfx Ahsw U U Uwececf - Electro-hydraulic clamping of the vise - Electro-hydraulic lowering of the saw bow - Electro-hydraulic raising of the saw bow - Electro-hydraulic opening of the vise

Condition: used, Year of construction: 2004, fuel type: gas, weight max. in kg 2500 kg stroke 3050 mm fork length 1200 mm load centre 500 mm turning radius 2444 mm driving speed 22 km/h Rcsdpfx Aher Dg H Eecsf guage width vorne 1008 mm guage width hinten 932 mm weight of the machine ca. 3,64 t dimensions of the machine ca. 3,8 x 1,25 x 2,25 m

Condition: new, cutting diameter 305 mm saw band length 3375 mm cutting width 350 mm dimensions of saw-band 3375 x 27 x 0,9 mm 305 mm 260 mm 350 x 200 mm 250 mm 230 mm 230 x 200 mm 175 mm 155 mm 170 x 100 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 0,7 t Redpfxsu Dbvto Ahcscf dimensions of the machine ca. 1,5 x 1,8 x 1,9 m

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Universal Milling Machine Deckel FP4M with 3-Axis Active Digital Readout Heidenhain, Excellent Condition, CE Compliant!!! Technical Data: - Year of manufacture: 1992, Machine no. 2203-8449 - Fixed angle table - Spindle speed: 50 - 2500 rpm - Feed rate: 8 – 630 mm/min - Drive power: 3.7 / 4.4 kW - Spindle brake - Rapid traverse: 1300 mm/min - Travel (X/Y/Z): 500/400/400 mm - Vertical milling head traverseable on column - Vertical and horizontal quill - SK40 taper - Vertical quill extendable by 90 mm - Hydraulic drawbar system - Approx. weight: 1600 kg Equipment and Accessories: - 3-axis active Heidenhain digital readout - Coolant system - Chip tray - Central electric lubrication - Operating manual, spare parts drawings Redpfxeu Tuk Hs Ahcscf About the Machine: For sale is a Deckel FP4M Universal Milling Machine (Active) in very good condition. The machine has minimal backlash, and all slides move smoothly. Even at maximum spindle speeds, the milling machine runs quietly. The machine features hydraulic tool clamping. The FP4M was only occasionally used in a state-run facility for training purposes. On this newer FP4 model, the feed rates are steplessly adjustable in all three axes, and each axis also features a rapid traverse. A major advantage is the active 3-axis digital readout. With the Heidenhain control, you can input measurements that the machine will approach automatically. Oil change has been performed; mechanically and electrically tested. The Heidenhain digital readout makes work easier and even more precise. Take advantage of the opportunity to inspect and test this machine under power on site.