2004 Peddinghaus Hydraulic 502

Peddinghaus Hydraulic 502

Condition: used, Year of construction: 1994, punching force max. 50 t throat 510 mm stroke 32 mm stroke - stepless adjustable 10 - 32 mm no. of strokes 35 bei 10 mm Hub/min Working height 1070 mm daylight 350 mm table width 255 mm dimensions ca. 1080 x 650 x 1680 mm material layer 630 X 535 weight ca. 1400 kg Scraper, height-adjustable and removable, with interchangeable plate Hydraulic low-pressure finder for foot switch operation Two-stage foot switch and electrical controls Integrated hydraulic unit With punching saddle for dies no. 3 and 4, up to Ø 39.5 mm Quick-change device for punches 3 and 6 up to Ø 39.5 mm Peddinghaus blue series Hsdpfxeyrhyus Ak Dsl with material support table no. 513, dimensions 630 x 535 mm

Condition: used, functionality: fully functional, gearing type: mechanical, fuel type: electric, Year of construction: 2019, Height: approx. 4,700 mm Bunker volume: approx. 60 m³ Plate conveyor width / length: approx. 1,150 x 4,800 mm Length: approx. 7,400 mm Width: approx. 5,200 mm Bonfigioli gearbox: Type SK 185 Hjdpswk E Emofx Ak Dol Siemens electric motor: 346 to 524 volts, 160 watts

Condition: good (used), Year of construction: 2005, machine/vehicle number: 4222559205002, Offer 25437 Technical Data: - Pressing force: 500 kN - Stroke infinitely adjustable: 10 - 32 mm - Strokes per minute: 22 - 27 1/min - Throat depth: 510 mm - Installation height: 350 mm - Drive: 400 V / 4 kW - Punching, for example: up to 27 mm Ø in steel: 14 mm - With special punching saddle, e.g.: up to 39 mm Ø in steel: 9.5 mm - e.g. up to 90 mm Ø in steel: 4 mm - Dimensions (approx.): W 700 x H 1700 x D 1200 mm - Weight (approx.): 1150 kg - Equipped with: - Hydraulic low-pressure centre punch locator - Extended punch holder for punching in section steel Hjdpfxex S Ehws Ak Dol - Roller conveyor with gripper feed, control PEHU 101 - Roller conveyor approx. 6000 mm - Foot switch - Emergency stop button

Condition: new, Year of construction: 2025, drilling capacity: 40 mm, throat depth: 1,220 mm, spindle speed (min.): 110 rpm, spindle speed (max.): 2,900 rpm, overall weight: 1,710 kg, spindle stroke: 200 mm, spindle mount: MK 4, Drilling capacity in St 60 40 mm Drilling capacity in GG 20 40 mm Hjdpfx Astzkmbjk Del Thread cutting (St 60 / GG 20) M 27 / M 36 Tool holder short spindle MK 4 Projection center spindle / column min. - max. approx. 210 - 1220 mm Clamping surface machine table approx. 1200 x 510 mm T-slots in the machine table: Number x width 3 x 18 mm Distance drill spindle - table min. - max. approx. 375 - 675 mm Distance drill spindle - base plate (= option) min. - max. approx. 1075 - 1375 mm Spindle stroke approx. 200 mm Feed rates approx. (4) 0.08 - 0.1 - 0.2 - 0.3 mm / U Speed range of the main spindle: infinitely variable 110 - 2900 rpm Dimensions (height x width x depth) approx. 2500 x 1200 x 1710 mm Net weight approx. 1710 kg Drive power spindle motor 400 V, 50 Hz approx. 2.2 / 4.0 kW

Condition: ready for operation (used), Year of construction: 2019, Lifting capacity: 2000kg, lifting height: 4000mm, fork length: 1220mm, power: 41kW, fuel: gas, machine dimensions X/Y: approx. 2350mm/1000mm, operating hours: 1793h. Including attachment Bolzoni Shifter 5BSS200F, mast model: 5F20C40, tower height: 2500mm. Documentation available. On-site inspection is possible. Hodov Ip Sgepfx Ak Del

Condition: good (used), 1 x hydraulic hacksaw Kasto Hodpsruqv Hjfx Ak Dsl EBS 450 with roller stand Technical data: Sawing area: Ø 450 mm round / 425 x 350 mm flat Saw blade dimensions: 700 x 50 x 2.5 mm 4 stroke speeds 40 / 57 / 80 / 115 H/min Cutting pressure: infinitely variable Mitre: 45° - Coolant device The machine can be inspected under power.

Condition: new, pressure: 60stroke: 250total power requirements: 4weight approx.: 800messurements (LxWxH): 1.710 x 700 x 2.100Technical DataPress force: 60 tons Motor power: 4 kW Stroke: 250 mm Clear distance between columns: 1,040 mm Piston Ø: 180 x 120 mm Feed speed: 8 mm/s Working speed: 4 mm/s Return speed: 10 mm/s Length: 1,710 mm Width: 700 mm Height: 2,100 mm Weight: 800 kg Hedpfod Ab Iqsx Ak Dsl EquipmentSteel welded construction Any stop position Pressure gauge Safety valve against overload 2 V-prisms Height-adjustable table Table up/down device Control with operating lever Manual right/left cylinder movement Equipment according to CE regulations, operating manual in German and English

Condition: new, Hydraulic - sectional steel shears LFSS Typ. HKM 60 - 5 stations Including MUBEA - punch and die holder Including Ringsland - punch and die holder ::: PUNCH ::: Ø / sheet thickness: Ø 28 mm / 15 mm, Ø 38 mm / 11 mm, Ø 110 mm / 3 mm stroke: 55 mm number of strokes (20 mm): 26 / min throat: 220 mm Working height: 940 mm ::: STEEL SHEARS ::: Capacity round: Ø 40 mm capacity square: 35 mm ::: ANGLE SHEARS ::: Capacity 90°: 120 x 120 x 12 mm capacity 45°: 80 x 8 mm working height: 1140 mm ::: PLATE SHEARS ::: capacity: 200 x 20 mm, capacity: 300 x 15 mm, cutting length: 317 mm cutting with angle: 80 x 10 mm, working height: 940 mm ::: CUT-OUT ::: Hodpfx Akogiplns Dsl thickness: 10 mm, width: 42 mm, depth: 100 mm Working height: 940 mm Capacity: 60 to., Motor power: 4 kW, Voltage: 400 V Weight: 1440 kg Dimensions (LxWxH) 1520 x 950 x 1780 mm

Condition: good (used), Year of construction: 1991, machine/vehicle number: 0168091277886, Offer 23294 Hydr. combined flat and profile steel shears with notching device and hole punch Technical data: - Flat steel shears - blade length 470 mm - for flat material 450 x 15 mm - or 300 x 20 mm - Profile steel shears - L-steel at 90° 140 x 13 mm - at 45° 70 x 7 mm - T-steel at 90° 70 mm - Steel bar shears - round steel 50 mm - Square steel 42 mm - Notching device - rectangular notching 52 x 90 x 12 mm - Hole punch - Punching force approx. 750 KN - Infinitely variable stroke 0 - 70 mm Hodorll I Uopfx Ak Dsl - punches holes in steel up to 30 mm Ø in 20 mm - throat 310 mm - Hydraulic drive 400 V / 7.5 kW - Space requirement approx. W 1600 x H 1850 x D 1400 mm - Weight approx. 2400 kg - with: - 2 E. foot pedals for two separate work stations - Turntable

Condition: used, Section steel shears, profile shears, punch, punching machine, hole punch -Pressure force: 29 to Hedpjf Ek H Usfx Ak Dol -Punching: -Scissors: -to cut: -not: -mechanical release: -div. Punches and dies: -Length stop: -Installation dimensions: 1300/1570/H1900 mm -Transport dimensions: 1300/770/H1900 mm -Weight: 1112 kg