Drill

Panhans 116

Condition: excellent (used), Year of construction: 1982, Panhans Mortising Machine Type: 116 – School Model – Nodpfx Ajx Nrhrjcboct Two-hand operation Dowel hole drilling unit: spacing 16, 22, 25, 32 mm Drilling depth: 145 mm Mortise length: 240 mm Height adjustment stroke: 135 mm Motor power: 1.5 kW Speed: 2800 rpm Hold-down: manual Extraction port: 100 mm Machine length: 1280 mm Machine width: 960 mm Weight: 300 kg Location: from stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2023, DOUBLE GLASS BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLASS BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double miter saw for the simultaneous cutting of two glass beads positioned one above the other. The right saw unit is fixed, adjustment of the left unit is via the set cutting length can be read off a digital display. The units have supports that allow two glass beads to be cut simultaneously. The upper support can be removed for cutting larger cross-sections. After the cutting process is completed, the pneumatic clamping cylinders automatically swing to the side to simplify loading and unloading of the machine. STANDARD EQUIPMENT • Fixed unit on the right • Digital dimension display • Pressure switch • 2 HM-tipped saw blades • Electrical system with motor brake, undervoltage release, motor protection switch • Pressure switch • Tool set • Guards with horizontal clamping devices, pivoting • Two-hand control • Belt drive • Pneumatic unit lift • Middle support TECHNICAL DATA • Motor power 2 x 1.2 kW • Saw blade diameter Ø 220 mm • Max. cutting height without support 80 mm • Max. cutting width at 90 degrees 55 mm • Max. cutting width at 45 degrees 40 mm • Max. cutting length 2800 mm (optional 4000 mm) • Min. cutting length 158 mm • Weight 217 kg • Space requirement (standard equipment) 3000 x 850 mm Extended cutting capacity 1 pc Maximum cutting length • 4000 mm Star stop 4 positions 1 pc set 2 mechanical stops for adjusting up to 4 intermediate angles. Additional center support. 1 adjustment for rebated profiles. 1 adjustment for rebated profiles as per drawing: - Attachment to the clamping devices to compensate for the profile inclination - Allowances on the rear stops of the units and the center support. The sketch below shows (in green) a beveled presser that follows the inclined profile and presses it against the allowance on the stop (shown in red). Storage location: Garbsen Nsdpfsxnlgcjx Acbect

Condition: new, Year of construction: 2024, Panhans long hole drilling machine type: 116/10 -Drilling depth max. 145 mm -Drilling length max. 240 mm -Height adjustment 135 mm -Suction nozzle ø 100 mm -ColorRAL 7035 light greyRAL 5000 violet blue -Net weight approx. 200 kg Solid German mechanical engineering Professional slot milling and precise dowel drilling Ncsdpfxsr Eli Ts Acbst Fixed table, smooth-running mobile drill motor Travel mechanism for greater mobility Cast iron table 700 x 380 mm thick-walled and highly ribbed Smooth-running cross support with adjustable ball guides for lateral and depth adjustment Height adjustment via handwheel and scale, drilling depth stop via scale, drilling length limit adjustable via side stops left and right Drill motor output 1.3 kW/1.8 hp with motor brake and practical tool tray Incl. emergency stop button High-precision three-jaw drill chuck, clamping range 5 - 20 mm Dowel drilling device for drilling holes in rows with 16, 22, 25 and 32 mm raster roller High-precision milled raster, fixed via spring-loaded raster bolt Plug-in frame stop with index bolt for the positions: center, left, right CE-compliant GS tested Incl. additional special accessories: - Single lever operation - Handwheel with dial gauge Location: ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 1995, used, in good condition, low hours, top equipment Manufacturer: Panhans Model: 116H Year of manufacture: 1995 Njdpfxoxgu Uas Acboct Machine No.: 640 GS wood dust tested 2-lever operation Drill chuck 20 mm Dowel boring device with 4 stops 45° continuously adjustable mitre fence Mobile 2 pneumatic workpiece clamps Pneumatic height adjustment with foot pedal Extraction connection D 100 mm Required space approx. 950 mm x 1000 mm x 1300 mm Weight approx. 200 kg Storage location: 54634 Bitburg, free loaded, unpacked Handover in current condition as inspected without guarantee or warranty

Condition: new, functionality: fully functional, New machine - stock clearance sale - Tipping is mechanical. The stated price is net ex warehouse location. Nodow Sfdwepfx Acbsct

Condition: new, Year of construction: 2023, New machine Year of construction 2023 Equipment and technical data: - Solid German machine construction - Professional slot milling and precise dowel drilling Fixed table, smooth-running mobile drill motor - Travel device for greater mobility - Cast iron table 700 x 380 mm thick-walled and highly ribbed - 2 manual eccentric clamps with solid steel columns for clamping the workpieces Ncsdpfjw I Uzkox Acbot - Smooth-running cross support with adjustable ball guides for lateral and depth adjustment - 2-lever operation - Height adjustment via handwheel and scale, drilling depth stop via scale, drilling length limit adjustable via left and right side stops - Drill motor power 1.3/1.7 kW, pole-changing, speed 1500/3000 rpm with mechanical motor brake and practical tool tray - incl. emergency stop button - High-precision two-jaw drill chuck with protective sleeve, clamping range 1-20 mm - Dowel drilling device for drilling holes in rows with 16, 22, 25 and 32 mm raster roller high-precision milled raster, fixed via spring-loaded raster bolt - Plug-in frame stop with index bolt for the positions: center, left, right Mitre fence, plug-in with index bolt for 45° and 22.5° - Workpiece fence up to 1500 mm for series processing - CE-compliant, GS tested - Max. Drilling depth 145 mm - Max. Drilling length 240 mm - Height adjustment 135 mm - Clamping range 5-20 mm - Motor power 1.3 / 1.7 kW - Voltage 400 V / 50 Hz - Suction nozzle 100 mm Ø - Color RAL 7035 light grey and RAL 5000 violet blue Special equipment: - Dial gauge in the handwheel, with 0.1 mm height adjustment display instead of the scale - Single-lever operation with remote locking for longitudinal and transverse movement of the drill motor including loosening and locking of the raster bolt on the dowel drilling device, narrow workpieces can then also be processed from the side of the table - Emergency stop button with key - Safety cover over the drill chuck with electric lock New price with this equipment 12213. Shipping dimensions: 120x80x160 cm Weight: approx. 200 kg Availability: short term Storage location: Hochheim

Condition: new, Year of construction: 2024, TECHNICAL DATA -drilling depth max. 145 mm -drilling length max. 240 mm -height adjustment 135 mm -suction port ø 100 mm -speed 1500 / 3000 rpm -ColorRAL 7035 light grayRAL 5000 violet blue -net weight approx. 200 kg Solid German machine construction Professional slot milling and precise dowel drilling Fixed table, smooth running mobile drilling motor Travelling device for more mobility Cast iron table 700 x 380 mm thick-walled and highly ribbed Nodpsfpa Raefx Acbect Smooth-running cross support with adjustable ball guides for lateral and depth adjustment Height adjustment via handwheel and scale, drilling depth stop via scale, drilling length limitation adjustable via side stops on left and right side Drilling motor power 1.3 kW/1.8 HP or 1.7 kW/2.3 HP, pole-changing, speed 1500/3000 rpm with motor brake and practical tool tray Incl. emergency stop button High-precision three-jaw drill chuck, clamping range 5 - 20 mm Dowel drilling device for hole line drilling with grid roller 16, 22, 25 and 32 mm high-precision milled grid, fixation via spring-loaded grid pin frame stop pluggable with index bolts for the positions: center, left, right Miter fence pluggable with index bolts for 45° and 22,5°workpiece fence up to 1500 mm for series machining CE-conform GS tested

Year of construction: 2000, condition: refurbished (used), The FKS-10CP suppository filling, cooling and sealing equipment for pre-formed moulded plastic packaging for suppositories. In the year 2019 the plant mechanically and electronically was completely overhauled is as new. Before delivery the plant is test-run using suppository, casings supplied by CP-Citopac GmbH Nodpfxjfc I Hao Acbect More technical details you found in the Datasheet.

Condition: new, Number of spindles 6 St. Working width 250 mm Working height 150 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 6-24 m/min. weight 4770 kg Dimensions (L/W/H) 4722x1860x1776 mm Vierseitenhobelmaschine Kuper SWT XL-6 in Fenster-Version mit elektronischer Axial- und Radialverstellung der Spindeln. Schwerer Maschinenständer, verwindungsfrei und schwingungsarm. Ncedpfx Acsvnv Ubebst Anzahl der Spindeln: 6 Arbeitsbreite: 250 mm Arbeitshöhe: 150 mm Abrichttischlänge: 2500 mm Spindeldrehzahl: frequenzgeregelt 4.000 - 8.000 U/min Vorschubgeschwindigkeit: 6-24 m/min Ausführliche Beschreibung finden Sie in nebenstehender PDF-Datei! (Technische Angaben laut Hersteller - ohne Gewähr!)

Condition: new, Year of construction: 2022, Dowel hole drilling device: no Drilling depth: 150 mm oblong hole length: 180 mm Height adjustment travel: 145 mm Motor power: 1,5kW Speed: 3000 rpm Ncedpfx Aogq Un Aecbet Suction connection: 100 mm Machine length: 1280 mm Machine width: 960 mm Weight: 240 kg