Machining Centres - Horizontal

PAMA SPEEDCENTER

Condition: used, Year of construction: 2000, grinding diameter 450 mm grinding length 1000 mm centre height 225 mm Photo outside of the machine of an already delivered one in similar scope. Other fotos from the origin machine. -major maintenance -New table geometry -partial painting of the interior Djdpfexzk Niox Ab Tskp grinding wheel equipment LEFT 400x63x127mm (standard) grinding wheel equipment RIGHT 300x40x127mm Internal grinding unit Ø120mm for HF spindles CNC control KELCO 120 C-axis for non-circular grinding. Kel-Poly B-AXIS: CNC-controlled B-axis KELCO 120: v constant 35m/s or 45m/s High-frequency internal grinding spindle Operating unit for MFV and MFZ spindles Hydraulic quill retraction for the tailstock NO micro-adjustment on the tailstock Spring-loaded quill insert Top table cooling Standard workpiece headstock MK 5 DIN 55026 size 5" Micro-adjustment for the standard workhead Dressing device on the lower table Active longitudinal positioning KELPOS, MARPOSS, mounted on the grinding head Tool measuring system KELSET, MARPOSS MARPOSS gate sensor Measuring control MARPOSS Minialsar prepared Paper belt filter

Condition: good (used), Year of construction: 2007, Machine is in good working condition. Machine come without automatic line. Marked equipement with red not come.. Some accesories and machine equipement are also available. Dedpfx Absxf Iame Tokp More specs of the machine, check last two pictures.

Condition: like new (used), Year of construction: 2016, functionality: fully functional, travel distance X-axis: 7,000 mm, travel distance Y-axis: 3,200 mm, travel distance Z-axis: 1,500 mm, total length: 10,500 mm, table length: 6,000 mm, table width: 3,000 mm, total width: 7,475 mm, spindle speed (min.): 2,670 rpm, spindle speed (max.): 18,000 rpm, total height: 5,380 mm, table height: 300 mm, FPT INDUSTRIE DINOMAX 3 MOVABLE BRIDGE MILLING MACHINE TECHNICAL SPECIFICATIONS Brand: FPT Industrie Model: Dinomax 3 Year: 2016 Dedpey Ta Tkjfx Ab Tskp CNC: Heidenhain TNC 640 Table: 6000 x 3000 X-axis travel: 7000 mm Y-axis travel: 3200 mm Z-axis travel: 1500 mm 40-tool magazine: (25 ISO 50 positions / 15 HSK A63 positions) Pick-up system for tool magazine, 3 positions Internal coolant system, 20 Bar Swarf filter Video surveillance system during machining AutoCal (automatic calibration software) MAPR (ISO 50 measuring and alignment probe) MRLUL (verification laser probe)

Condition: used, Year of construction: 2008, functionality: fully functional, travel distance X-axis: 3,150 mm, travel distance Y-axis: 1,850 mm, travel distance Z-axis: 1,000 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 24 m/min, spindle speed (max.): 24,000 rpm, torque: 87 Nm, Fidia C20 CNC WORKING AREA X-axis longitudinal travel: mm 3,150 Y-axis transverse travel: mm 1,850 Z-axis vertical travel: mm 1,000 MAX AXIS SPEEDS X, Y axis feed rate: m/min 30 Z axis feed rate: m/min 24 WORK TABLE Clamping surface: mm 3,000 x 1,600 Maximum permissible load: kg/m² 5,000 T-slots: • Longitudinal 8 H12 + 1 H8 • Width mm 22 • Pitch mm 160 ELECTROSPINDLE Maximum power (S6 60%): kW 55 Spindle speed range: rpm 240 ÷ 24,000 Constant power range: rpm 6,000 ÷ 24,000 Maximum torque: Nm 87.5 Tool holder: HSK-A63 C-axis travel: ± 200° Dkedoyw Tddspfx Ab Tjp C-axis speed: °/min 2,000 C-axis offset from spindle axis: mm 75 A-axis travel: +95° / -110° A-axis speed: °/min 2,000 Max distance spindle nose – table surface: mm 1,175 Machine equipped with: • 24-position tool magazine • Remote electronic handwheel • HMS system for head calibration • Various equipment included with the machine • User and maintenance manual and CE declaration of conformity

Condition: ready for operation (used), Year of construction: 2023, operating hours: 8,900 h, functionality: fully functional, Heller HF5500 including Fastems FPT 1000 Heller HF5000 5-axis machining center Dkedpfxsw I Tups Ab Tsp Control: Siemens Sinumerik SL Spindle: HSK100 Tool magazine: 100 tools Fastems FPT1000 18 pallet stations Planning software (unmanned shift)

Condition: good (used), Year of construction: 2007, control 840 D x-axis 2500 mm y-axis 2500 mm z-axis 1700 mm Control system - Siemens Sinumerik 840 D Dkodpfxewzyp Uo Ab Tsp Max. workpiece weight - 6000 kg Spindle diameter - 130 mm Quill stroke - 700 mm Tool holder - ISO 50 DIN 69871 - AD Max. torque at the spindle - 1847 Nm Total power requirement - 65 kW Machine weight approx. 45 t Space requirement approx. 10.9 x 9.3 x 5.7 m

Condition: excellent (used), Year of construction: 2009, travel distance X-axis: 5,000 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 2,350 mm, feed rate X-axis: 13,000 m/min, feed rate Y-axis: 13,000 m/min, feed rate Z-axis: 13,000 m/min, total length: 12,000 mm, total height: 4,800 mm, table width: 2,000 mm, total width: 6,800 mm, table length: 2,500 mm, drilling capacity: 180 mm, rotational speed (min.): 2,000 rpm, feed length W-axis: 1,000 mm, Coolant true spindel 20 Bar Paper filtration system ATC Tool changer 60 Positions  Spindel extension L = 550 mm Full B-Axis 360.000 with ROD880C Table load 28.000 Kg X - Travel: 5000mm Y - Travel: 3500mm Z - Travel: 2350mm W - Travel: 1000mm Table Length: 2500mm Table Width: 2000mm Table load: 28000 Speeds / ranges: 2000Rpm Power: 51kW Spindle Taper: 180 ISO50ISO/Bt/Mk Feed rate X-Axis: 13000mm/min. Dkjdpfoy Hq Dyox Ab Tjp Feed rate Y-Axis: 13000mm/min. Feed rate Z-Axis: 13000mm/min. Feed rate W-Axis: 13000mm/min. ATC Toolchanger: 60 Coolant through spindle / Bar:20 Number of controlled axis: 5 Length: 12000mm Width: 6800mm Height: 4800mm Weight: 44000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Technical characteristics: HORIZONTAL MACHINING CENTER AUTOFEED 8 PALLETS 140 TOOL ISO50 Dkedpfxe Dvlxj Ab Tjp

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Workpiece Clamping & Table: • Pallets according to DIN 55201, maximum load capacity 5,000 kg • Tilting moment: 50,000 Nm • Rotary table: 10 rpm, resolution 0.001°, tangential moment (clamped): 25,000 Nm Pallet & Tool Changer: • Automatic pallet changer for 3 pallets, changeover time 47 s • Automatic tool changer, chip-to-chip time: 13 s • Tool weight up to 15 kg • Drum magazine with 320 storage slots (4 drums), max. tool diameter 250 mm, max. length 450 mm, max. weight 35 kg Dodpfx Aboyzr Ayo Tskp Travel & Feed Rates: • Feed range: 1–40,000 mm/min • Rapid traverse: 40 m/min • Acceleration (x/y/z): 4 / 5 / 3 m/s² • Feed forces: max. 20 kN Main Spindle: • Spindle diameter: 100 mm • Speed range: 20–6,000 rpm (optional 10,000 rpm, 2-stage gearbox) • Tool interface: SK50 (DIN 69871), optional BT50 or HSK-A100 • Through-spindle coolant, max. 70 bar Coolant System: • Coolant unit with gravity fleece filter • Supply pressure: 10–70 bar, tank volume 3,400 l • Temperature stabilization and compensation for high precision • Optional: Sag and spindle expansion compensation, spindle warm-up program • Hinged belt chip conveyor (optional, with fleece or vacuum filter) • Connection to central coolant system possible Performance & Accuracy: • Continuous power consumption as per installation plan • Sound pressure level ≤ 80 dBA • Positioning accuracy (x/y/z): o Tp = 0.006 mm o Psmax = 0.005 mm o Umax = 0.004 mm General Data: • Net weight (complete): approx. 26,500 kg • Color scheme: Light grey RAL 7035 / Mouse grey RAL 7005 / Ruby red RAL 3003 • Operating voltage: 400 V / 50 Hz • Documentation in German language

Condition: excellent (used), Year of construction: 2014, operating hours: 68,000 h, functionality: fully functional, travel distance X-axis: 2,200 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,200 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 15,000 rpm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 30 m/min, torque: 167 Nm, overall weight: 35,000 kg, Initial commissioning: December 2014 Control system: Fidia X-axis: approx. 2,200 mm Y-axis: approx. 3,500 mm Z-axis: approx. 1,200 mm A-axis: ± 100° C-axis: ± 275° Machine operating hours: approx. 68,000 h Total spindle hours: approx. 26,500 h Clamping table: 2,000 x 3,500 mm with T-slots 2-axis fork milling head Spindle power: 70 kW Spindle speed: max. 15,000 rpm Torque: max. 167 Nm Tool holder: HSK 100A Tool clamping: hydraulic Linear axis drives Feed rate X, Y, and Z axes: up to 50 m/min / 30 m/min Connection data Voltage: 400 V Frequency: 50 Hz Dimensions, weights Required space for machine without peripherals: approx. 8,000 x 6,000 x 5,000 mm Total weight: approx. 35,000 kg Additional equipment - Coolant system - 26-place tool changer - Work area enclosure - Chip conveyor Dodpjyrc Akefx Ab Tskp Available at extra charge: - Wireless touch probe - BLUM laser Condition of the machine Fully operational, very good condition. Can be inspected under power.