Drilling and milling machine

OPTIMUM 28 VS-ST

Condition: used, functionality: fully functional, power: 250 kW (339.91 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 390 l, operation weight: 39,000 kg, maximum load weight: 14,000 kg, tire condition: 100 %, emission class: euro3, shovel volume: 6.4 m³, digging bucket width: 2,800 mm, Year of construction: 2013, Front axle load: 19,115 kg Cab: ROPS/FOPS-certified Fuel tank capacity: 390 liters Gjdpfx Aaoxpww As Ejud Brake: SAHR (spring-applied, hydraulically released) multi-disc wet brakes on each wheel Turning circle (outer): 7.508 m Transmission: Dana Series T40000, 4-speed powershift transmission with torque converter Turning circle (inner): 4.015 m Maximum speed: 26.9 km/h (in 4th gear) Rear axle load: 18,885 kg Maximum torque (at 1,350 rpm): 1,674 Nm Weight: approx. 39,000 kg Output (at 2,100 rpm): 250 kW / 355 HP Engine manufacturer: Cummins QSM11 EPA Tier 3/EU Stage IIIA Bucket capacity (heaped): 6.4 m³ Breakout force (mechanical): 18,420 kg Breakout force (hydraulic): 22,300 kg Payload capacity: 14,000 kg

Condition: new, Year of construction: 2026, functionality: fully functional, Swing dia over bed 500 mm Swing dia over cross slide 270 mm Swing dia in bridge 700 mm Length of bridge 357 mm Gusdsyt Iaqepfx Aa Eod Center high 250 mm Center distance 1500 mm Width of bed 340 mm Max weigth of wpc. 300 kgs Spindle speed 22 – 2000 rpm Spindle hole D53 mm Spindle power 5,5 kW Weight ca.1950 kgs Dimensions LxWxH = 3200 x 1100 x 1500 mm Accessories and features - 3 axis D.R.O. - Chuck protection - 3 jaws chuck D250 mm - 4 jaws chuck D300 mm - Tool holder protection - Stopper for long. slide - Steady rest - Travelling rest - Center - Reduction adapter for main spindle - Tailstock - Coolant unit - 4-fold toolholder - Machine lamp - Rapid speed on long, and cross slides - CE marking - Manuals

Condition: used, Year of construction: 1986, machine/vehicle number: 275590, Ref. No. 25362 Technical Data: - Drilling capacity 25 mm - Drill spindle taper MK 3 - Drill spindle speeds 100 / 205 / 345 / 440 rpm Godpeyf Ehiofx Aa Ejud 695 / 885 / 1450 / 2900 rpm - Drill spindle stroke 130 mm - Drill spindle reach 260 mm - Coordinate table with 3 T-slots 580 x 240 mm - Table travel X-axis: 415 mm Y-axis: 155 mm - Drive 400 V / 0.75 / 0.9 kW - Space required approx. W 900 x H 1800 x D 700 mm - Weight approx. 270 kg - Machine vice

Condition: used, Universal tool milling machine Gsdpow Rlvqjfx Aa Ejud Brand: OPTIMUM Model: MT 100 Year of manufacture: 2018 – workshop tested Machine no.: J33021808035 Geometric acceptance with test report Accessories: - 3-axis digital display DPA 2000 - Vertical milling head SK 40 with drawbar thread M 16 - Fixed table 1,120 x 260 mm (T-slot: 14 mm) - Machine lamp - Coolant system - Manual central lubrication - Operating manual Used as seen, without warranty The machine technically corresponds to the state of the art at the time of manufacture.

Condition: used, turning diameter over bed / mm turning diameter over slide rest / mm turning length / mm Conventional lathe with copying attachment and extensive accessories Turning diameter over cross slide: 240 mm Spindle bore: 52 mm Turning diameter: 360 mm Center height: 180 mm Turning length: 1,000 mm Overall length: 2,200 mm Overall width: 750 mm Overall height: 1,400 mm Gedev Rgzwspfx Aa Esud Maximum spindle speed: 1,750 rpm Min. spindle speed: 60 rpm Total weight: 1,800 kg All technical specifications are subject to change without notice. Deviations may occur depending on the year of manufacture, model, or condition of the machine. We assume no liability for the accuracy or completeness of this information.

Condition: used, Year of construction: 2018, functionality: fully functional, Helium leak detection device. Guodeyt Sm Uepfx Aa Eed

Condition: new, bore capacity in steel (diameter) 25.0 mm throat 180 mm bore stroke 80.0 mm morse taper 2 MK turning speeds 180 - 2270 U/min table-size 305 x 305 mm swivelling +/- 45 Grad T-slots 16.0 mm column diameter 72.0 mm voltage 400 V total power requirement 1.10 kW weight 57.0 kg range L-W-H 400 x 630 x 990 mm scope of delivery - Keyless chuck 1 - 16 mm / B 18 - Drill chuck arbor MK 2 / B 18 - Digital quill stroke display - machine light - Right-left rotation Guodpjxaa Thofx Aa Esd - protective cover - Height-adjustable protective cover - T-nuts - operating tool

Condition: like new (used), Manufacturer: Varian Type: NHS-35 Condition: The pump is in very good condition and can also be supplied with a corner valve if required. Warranty: 3 months Delivery time: In stock Gedpehmba Asfx Aa Ejud

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, machine just arrived and will be cleaned soon. turning diameter over bed: 400mm distance between centers: 1000mm spindle size: 50 mm chuck size 200mm speed range 40 rpm to 2000 rpm machine weight: 1700kg Guedoyh Ndwspfx Aa Eed including 3 jaw chuck and tool holder

Condition: excellent (used), - Heidenhain digital display. - Accessories available. Gedpfjw Hqf Rjx Aa Ejud Travel paths: X – travel 280 mm Y – travel 210 mm Cross table KS 255 D Spindle speeds 135 – 4,500 rpm