Water jet cutting system

OMAX 80160

Condition: refurbished (used), functionality: fully functional, travel distance X-axis: 1,390 mm, travel distance Y-axis: 1,390 mm, table length: 2,030 mm, table width: 1,650 mm, warranty duration: 24 months, pump pressure: 4.138 bar, power: 30 kW (40.79 HP), 𝐃𝐢𝐞 𝐊𝐨𝐧𝐟𝐢𝐠𝐮𝐫𝐚𝐭𝐢𝐨𝐧 𝐝𝐞𝐫 𝐖𝐚𝐬𝐬𝐞𝐫𝐬𝐭𝐫𝐚𝐡𝐥𝐬𝐜𝐡𝐧𝐞𝐢𝐝𝐚𝐧𝐥𝐚𝐠𝐞 𝐢𝐬𝐭 𝐟𝐫𝐞𝐢 𝐰ä𝐡𝐥𝐛𝐚𝐫. 𝐌𝐞𝐥𝐝𝐞𝐧 𝐒𝐢𝐞 𝐬𝐢𝐜𝐡 𝐠𝐞𝐫𝐧𝐞 𝐮𝐧𝐝 𝐭𝐞𝐢𝐥𝐞𝐧 𝐒𝐢𝐞 𝐮𝐧𝐬 𝐈𝐡𝐫𝐞 𝐊𝐨𝐧𝐟𝐢𝐠𝐮𝐫𝐚𝐭𝐢𝐨𝐧𝐬𝐰ü𝐧𝐬𝐜𝐡𝐞 𝐦𝐢𝐭. 𝐙𝐮𝐦 𝐁𝐞𝐢𝐬𝐩𝐢𝐞𝐥: OMAX 5555 with 30 kW EnduroMAX pump and Tilt-A-JET cutting head - general overhaul with manufacturer certification and two-year warranty. OMAX waterjet cutting machines are ideal for pilot, one-off and small series production. Set-up times are significantly reduced compared to conventional manufacturing processes (e.g. no tool changes, no start hole drilling). The cost-cutting OMAX waterjet cutting machines are revolutionizing toolmaking as well as individual and series production, not including the numerous applications in the fields of mechanical and plant engineering. - 𝐀𝐮𝐟 𝐖𝐮𝐧𝐬𝐜𝐡 𝐅𝐢𝐧𝐚𝐧𝐳𝐢𝐞𝐫𝐮𝐧𝐠 𝐨𝐝𝐞𝐫 𝐋𝐞𝐚𝐬𝐢𝐧𝐠 𝐦ö𝐠𝐥𝐢𝐜𝐡 (𝐳.𝐁. 𝐛𝐢𝐬 𝐳𝐮 𝟖𝟔 𝐌𝐨𝐧𝐚𝐭𝐞𝐧) Bdodpsrm I Tqjfx Ab Iea - up to 20 times faster - up to 50% more cost-efficient - accurate to ± 0.02mm - precise, clean, quiet, user-friendly - Software and machine components based on the latest OMAX technology The Tilt-A-Jet cutting head automatically calculates and compensates for the natural taper. This results in a right-angled cutting edge. In addition, precise small angles can be produced in contours (toolmaking & press molds with small, precise initial angles, etc.). Prompt delivery can be arranged with INNOMAX AG.

Condition: refurbished (used), Measuring Range X/Y/Z = 900 x 1200 x 850mm Accuracy 4,0 + 4,5L/1000 (origin setup, now better after Retrofit) Completely refurbished 2018 with new Pantec Eagle Pro Controller Probesystem is Renishaw PH10MQ and SP25M Software Inspect3D Inca Premium actual version Computer is a HP z240 Option : Laserscanner (e.g. Kreon) Bdjdpfx Aedpak Reb Ija Probe changer

Condition: refurbished (used), functionality: fully functional, travel distance X-axis: 1,320 mm, travel distance Y-axis: 660 mm, table length: 3,680 mm, table width: 1,910 mm, warranty duration: 24 months, pump pressure: 4.138 bar, power: 30 kW (40.79 HP), 𝐃𝐢𝐞 𝐊𝐨𝐧𝐟𝐢𝐠𝐮𝐫𝐚𝐭𝐢𝐨𝐧 𝐝𝐞𝐫 𝐖𝐚𝐬𝐬𝐞𝐫𝐬𝐭𝐫𝐚𝐡𝐥𝐬𝐜𝐡𝐧𝐞𝐢𝐝𝐚𝐧𝐥𝐚𝐠𝐞 𝐢𝐬𝐭 𝐟𝐫𝐞𝐢 𝐰ä𝐡𝐥𝐛𝐚𝐫. 𝐌𝐞𝐥𝐝𝐞𝐧 𝐒𝐢𝐞 𝐬𝐢𝐜𝐡 𝐠𝐞𝐫𝐧𝐞 𝐮𝐧𝐝 𝐭𝐞𝐢𝐥𝐞𝐧 𝐒𝐢𝐞 𝐮𝐧𝐬 𝐈𝐡𝐫𝐞 𝐊𝐨𝐧𝐟𝐢𝐠𝐮𝐫𝐚𝐭𝐢𝐨𝐧𝐬𝐰ü𝐧𝐬𝐜𝐡𝐞 𝐦𝐢𝐭. 𝐙𝐮𝐦 𝐁𝐞𝐢𝐬𝐩𝐢𝐞𝐥: OMAX 2626 with 22 OR 30 kW EnduroMAX pump and OMAX cutting head - general overhaul with manufacturer certification and two-year warranty. OMAX waterjet cutting machines are ideal for pilot, one-off and small series production. Set-up times are significantly reduced compared to conventional production methods (e.g. no tool changes, no start hole drilling). The cost-cutting OMAX waterjet cutting machines are revolutionizing toolmaking as well as individual and series production, not including the numerous applications in the fields of mechanical and plant engineering. - 𝐀𝐮𝐟 𝐖𝐮𝐧𝐬𝐜𝐡 𝐅𝐢𝐧𝐚𝐧𝐳𝐢𝐞𝐫𝐮𝐧𝐠 𝐨𝐝𝐞𝐫 𝐋𝐞𝐚𝐬𝐢𝐧𝐠 𝐦ö𝐠𝐥𝐢𝐜𝐡 (𝐳.𝐁. 𝐛𝐢𝐬 𝐳𝐮 𝟖𝟔 𝐌𝐨𝐧𝐚𝐭𝐞𝐧) - up to 20 times faster - up to 50% more cost-efficient - accurate to ± 0.02mm - precise, clean, quiet, user-friendly Bjdpfx Ast A Az Tjb Ieda - Software and machine components based on the latest OMAX technology The Tilt-A-Jet cutting head automatically calculates and compensates for the natural taper. This results in a right-angled cutting edge. In addition, precise small angles can be produced in contours (toolmaking & press molds with small, precise initial angles, etc.). The A-Jet is fully software-controlled, the multi-axis accessory allows angles of up to 60° to be cut in relation to the vertical. The A-Jet cuts countersinks and any contour chamfers. This accessory is also used to produce weld seam preparations. Prompt delivery can be arranged with INNOMAX AG.

Year of construction: 2021, condition: new, Derryglan Ltd - offer a wide range of industrial washer for every application, food, meat, butcher, bakery, pharma, labs, processors and general industry. Washers for Utensils, Crates, Bins, Knife, Tray cleaning applications. Bedpfx Asgq N Ezob Ijda JEROS Washers have a specially designed lid which opens fully to allow easy operation and loading without causing backstrain to operators. The special JEROS features provide easy installation of the machines. Even in the smallest production areas. Further, the machine can be used as a sink when not in use as an automatic Utensil Washer. The flush hose The flush hose makes it possible to reuse the wash water e.g. for cleaning the floors. The flush hose can also be mounted on the mixer tap if required. Mixer tap Built-in mixer tap allows washer to be used as a sink with separate drainage. Fulfils the highest hygiene standards Even the most persistent dirt is removed! The fully automatical detergent dispenser ensures the optimum dosage of soap. The powerfull pumps and rotating wash arms provide a brilliant wash result.The end rinse pump guarantees a constant temperature of 85?C during the entire rinse period and sanitisation of the utensils is achieved. An additional advantage of the high temperature rinse is the fast drying of utensils by evaporation, a rinse aid can be automatically added to assist with this process The New Generation The 9100 Series comprises a total of five new models: 9110 / 9115 with rotating wash systems and 9117 / 9120 / 9130 with wash frame system. Inside, the machines have been thoroughly redesigned, focusing on hygiene and easy cleaning. The inside surfaces and rounded to ensure quick and automatic flow of water back to the filter and pumps. Filters, wash arms and wash frames come in electropolished surface finishes leaving the stainless surface completely smooth to prevent dirt from sticking to surfaces of the machine. This makes it easier to clean and maintain the machine Efficiency and optimum hygiene safty, including HACCP, form the base of the JEROS, set of values. Energy saving up to 25 % All the machines are now available with 'i-version' as standard. This means that all machines have water saving rinse nozzles and that both the wash and rinse tanks are isolated, as also the lid is with double wall and isolated. The machines therefore require less operating power, resulting in energy and water savings of up 25 % for all the models. It is also possible now to set the machines to 'auto off', as required, so that they do not have to be left unnecessarily in standby mode if they are not used for prolonged periods of time, etc. Eco wash As standard all models includes an environmentally friendly 'ECO wash' programme for less dirty objects. Pushing 'ECO wash', the machines wash with a reduced wash temperature and use less soap. Still the rinse with 85? C hot water for guarantee of hygienic result New double Micro-Filter: Unique double filtration system, with a progressive micro-fine filter, provides an efficient filtration of the wash water - thus entails a perfect washing result with less soap consumption and minimal water consumption Larger particles are collected in a coarse filter, wereas smaller particles are captured in the self-cleaning micro-fine filter. During the washing/rinse process, the collected particles are drainet out of the micro-fine filter from the bottom, just as well from the surface of water. this ensure a constant optimum wash water quality

Condition: refurbished (used), functionality: fully functional, travel distance X-axis: 660 mm, travel distance Y-axis: 660 mm, table length: 2,970 mm, table width: 2,080 mm, warranty duration: 24 months, pump pressure: 4.138 bar, power: 30 kW (40.79 HP), 𝐃𝐢𝐞 𝐊𝐨𝐧𝐟𝐢𝐠𝐮𝐫𝐚𝐭𝐢𝐨𝐧 𝐝𝐞𝐫 𝐖𝐚𝐬𝐬𝐞𝐫𝐬𝐭𝐫𝐚𝐡𝐥𝐬𝐜𝐡𝐧𝐞𝐢𝐝𝐚𝐧𝐥𝐚𝐠𝐞 𝐢𝐬𝐭 𝐟𝐫𝐞𝐢 𝐰ä𝐡𝐥𝐛𝐚𝐫. 𝐌𝐞𝐥𝐝𝐞𝐧 𝐒𝐢𝐞 𝐬𝐢𝐜𝐡 𝐠𝐞𝐫𝐧𝐞 𝐮𝐧𝐝 𝐭𝐞𝐢𝐥𝐞𝐧 𝐒𝐢𝐞 𝐮𝐧𝐬 𝐈𝐡𝐫𝐞 𝐊𝐨𝐧𝐟𝐢𝐠𝐮𝐫𝐚𝐭𝐢𝐨𝐧𝐬𝐰ü𝐧𝐬𝐜𝐡𝐞 𝐦𝐢𝐭. 𝐙𝐮𝐦 𝐁𝐞𝐢𝐬𝐩𝐢𝐞𝐥: OMAX 2626 with 22 OR 30 kW EnduroMAX pump and OMAX cutting head - general overhaul with manufacturer certification and two-year warranty. OMAX waterjet cutting machines are ideal for pilot, one-off and small series production. Set-up times are significantly reduced compared to conventional manufacturing processes (e.g. no tool changes, no start hole drilling). The cost-cutting OMAX waterjet cutting machines are revolutionizing toolmaking as well as individual and series production, not including the numerous applications in the fields of mechanical and plant engineering. - 𝐀𝐮𝐟 𝐖𝐮𝐧𝐬𝐜𝐡 𝐅𝐢𝐧𝐚𝐧𝐳𝐢𝐞𝐫𝐮𝐧𝐠 𝐨𝐝𝐞𝐫 𝐋𝐞𝐚𝐬𝐢𝐧𝐠 𝐦ö𝐠𝐥𝐢𝐜𝐡 (𝐳.𝐁. 𝐛𝐢𝐬 𝐳𝐮 𝟖𝟔 𝐌𝐨𝐧𝐚𝐭𝐞𝐧) - up to 20 times faster - up to 50% more cost-efficient - accurate to ± 0.02mm - precise, clean, quiet, user-friendly - Software and machine components based on the latest OMAX technology The Tilt-A-Jet cutting head automatically calculates and compensates for the natural taper. This results in a right-angled cutting edge. In addition, precise small angles can be produced in contours (toolmaking & press molds with small, precise initial angles, etc.). The A-Jet is fully software-controlled, the multi-axis accessory allows angles of up to 60° to be cut in relation to the vertical. The A-Jet cuts countersinks and any contour chamfers. This accessory is also used to produce weld seam preparations. Bdodpfot A Azmsx Ab Ija Prompt delivery can be arranged with INNOMAX AG.

Condition: new, Comparable to Durma, Baykal, Ermaksan, etc. Bending length: 3,020 mm Pressing force: 135 t Approach speed: 140 mm/s Bending speed max.: 10 mm/s Return speed: 130 mm/s Stroke: 320 mm Installation height: 550 mm Throat depth: 450 mm X-axis travel: 750 mm X-axis speed: 300 mm/sec R-axis travel: 250 mm R-axis speed: 100 mm/sec Clear distance between frames: 2,555 mm Machine length: 3,730 mm Machine width: 2,300 mm Total height: 2,850 mm Table height: 900 mm Motor power: 15 kW Oil tank: 190 l Machine weight: 9,500 kg (Technical data may vary depending on equipment) Standard features: - 3 CNC axes (Y1, Y2, X) Bdsdeq Rdtqjpfx Ab Isa - Double-guided, stable, and precise ram - Robust, double-guided backgauge - Manually adjustable, double-guided stop fingers on linear guides - Adjustable front support arms with height adjustment - Lateral and rear safety covers - Lower die adapter rail, 60 mm - Manual upper tool clamping system (Promecam system) - Manual crowning - Foot switch with emergency stop - 380 V, 50-60 Hz, 3-phase - LED lighting Recommended options: - Dener DA 66T control - Fiessler AKAS 2M laser finger protection - FPSC Safety PLC (manual) - X and R axes with servomotors - CNC crowning for high bending accuracy - 2 additional stop fingers - Other working lengths and thicknesses available with suitable accessories! -

Year of construction: 1977, condition: excellent (used), machine/vehicle number: 3273, Neff - internal broaching press machine type: vertical hydraulic broaching press Bdsdpfx Ajd N Rl Nob Isa manufacturer: Neff Germany type: 16 SRKA built in: 1977 stroke: 1300 pulling force: 16.000KG working stations: 1 PCs drive: hydraulic system equipment: coolant system remark: machine under power in stock Information about us: we are specialized for second hand broaching machine and still have anytime about 80 pcs of used broaching machines in our stock, vertical and horizontal machines from 3000kg up 63.000kg pulling force and from 1000mm stroke up to 3500mm stroke

Condition: new, thread dia. M10 - M33 mm Bdsdpfjfg U Slex Ab Ija 35/115 U/min. 320 Nm air pressure 6 - 8 bar working area 400 - 2000 mm

Condition: excellent (used), Year of construction: 1997, Measuring Range X – axis 500 mm Y – axis 600 mm Z – axis 300 mm Accuracy acc. ISO 10360 E = [3,0 + 4,0L/1000] µm at temperature range 18 … 22 °C max. workpiece height 440 mm wax. workpiece weight 250 kg base material granit dimension measuring table 640 x 1280 mm fixing holes M8 x 1,25 Scalesystem Mitutoyo Linear Scales resolution 0,0005 µm DCC Controller Mitutoyo CMMC5 DC motors all axis Guideways air earings Bdedpsfmp Ttsfx Ab Ioa Tilt&swivel head Renishaw PH10T Probesystem Renishaw TP200 Probe Changer SCR200 Computer Workstation (Windows 10) Software MCOSMOS-1 V2.4

Condition: refurbished (used), functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 305 mm, workpiece weight (max.): 1,814 kg, table length: 2,200 mm, operating speed: 12,700 mm/s, table width: 1,700 mm, warranty duration: 24 months, pump pressure: 4.138 bar, power: 30 kW (40.79 HP), 𝐃𝐢𝐞 𝐊𝐨𝐧𝐟𝐢𝐠𝐮𝐫𝐚𝐭𝐢𝐨𝐧 𝐝𝐞𝐫 𝐖𝐚𝐬𝐬𝐞𝐫𝐬𝐭𝐫𝐚𝐡𝐥𝐬𝐜𝐡𝐧𝐞𝐢𝐝𝐚𝐧𝐥𝐚𝐠𝐞 𝐢𝐬𝐭 𝐟𝐫𝐞𝐢 𝐰ä𝐡𝐥𝐛𝐚𝐫. 𝐌𝐞𝐥𝐝𝐞𝐧 𝐒𝐢𝐞 𝐬𝐢𝐜𝐡 𝐠𝐞𝐫𝐧𝐞 𝐮𝐧𝐝 𝐭𝐞𝐢𝐥𝐞𝐧 𝐒𝐢𝐞 𝐮𝐧𝐬 𝐈𝐡𝐫𝐞 𝐊𝐨𝐧𝐟𝐢𝐠𝐮𝐫𝐚𝐭𝐢𝐨𝐧𝐬𝐰ü𝐧𝐬𝐜𝐡𝐞 𝐦𝐢𝐭. 𝐙𝐮𝐦 𝐁𝐞𝐢𝐬𝐩𝐢𝐞𝐥: OMAX MAXIEM 1530, 30 kW MAXIEM pump and A-JET angle cutting head - general overhaul with manufacturer certification and two-year warranty. Customers looking for efficient and cost-effective waterjet cutting systems will find their home in the MAXIEM modular line. These powerful MAXIEM systems combine flexibility of use and affordability and can be expanded with a wide range of accessories to suit your cutting task. With the Modular Line MAXIEM, OMAX presents sophisticated, reliable waterjet cutting technology at an extremely economical entry-level price, thereby opening up the advantages of this technology for many areas of application. - 𝐀𝐮𝐟 𝐖𝐮𝐧𝐬𝐜𝐡 𝐅𝐢𝐧𝐚𝐧𝐳𝐢𝐞𝐫𝐮𝐧𝐠 𝐨𝐝𝐞𝐫 𝐋𝐞𝐚𝐬𝐢𝐧𝐠 𝐦ö𝐠𝐥𝐢𝐜𝐡 (𝐳.𝐁. 𝐛𝐢𝐬 𝐳𝐮 𝟖𝟔 𝐌𝐨𝐧𝐚𝐭𝐞𝐧) - accurate to ±0.025mm - No hardening on the cutting edges - No special requirements for workpiece fixing - no tool changes - no starting holes - no toxic gases or vapors - Software and machine components according to the latest OMAX technology Bjdpfx Abjrm Ilfs Ijda The precise cutting head can achieve an accuracy of ± 9 arc minutes and saves reworking on other processes (e.g. grinding). The machine is currently undergoing a general overhaul, so the illustrations are similar to the offer. Prompt delivery can be arranged with INNOMAX AG.