Injection molding machine

Engel Victory 500/120 Tech (145)

Condition: new, *TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Load circuits: 1 or 2 as standard Temperature range: - 45°C to +130°C Medium: water / glycol mixture Dimensions LxWxH (without connections) : 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300kg 2-circuit: approx. 1500kg *HIGHLIGHTS EQUIPMENT: -Controls: Temperature control (standard) -Control via SPS with touch screen -Analogue and digital interfaces -Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) -Heating control via solid-state relay (SSR) Dkjdpeg Ezarjfx Akvsr -Flow measurement in the internal circuit for flow monitoring (INFO: If the water/glycol mixture is incorrect, the system automatically warns and switches off in the next step) -Pressure-controlled cooling water regulator (INFO: Much more accurate than temperature controls) Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metal) (non-ferrous metal-free optional) All medium-carrying components and piping insulated for low-temperature application -Water-cooled condenser (air-cooled on request). *OPTIONS: -flow rate control: up to 100l/min, >4 l/min +/- 5% of measured value -Pressure control: 0.5 to 4.5 bar (control range) -compressed air monitoring -test piece emptying by means of compressed air - Cooling water monitoring -Limitation of inlet pressure -Other special options available on request and after technical inspection Visit our website for more details or for other performance classes. *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: good (used), Size max 750 x 1.050 mm Dedpfx Aksd Hp H Ijvjkr Stroke height 940 mm Lifting capacity max 600 kg

Condition: used, Year of construction: 2001, Baffle width: 4000 mm. Baffle height: 1000 mm. External dimensions: 4600 x 1500 mm. 2 x 1.5 kW motors. Total nominal flow rate: 7000 m³/h. Right and left exhaust nozzles with 300 mm diameter. Dsdpfx Ajvvizkekvokr Storage location: Garbsen

Condition: excellent (used), Year of construction: 2004, Engel Victory 80/45 Tech Closing force: 45 tons, without core Screw diameter: 22 mm Dksdpfx Akjh Rawbsvjr Year of manufacture: 2004 Control unit: 200

Condition: reconditioned (used), Year of construction: 2006, travel distance X-axis: 5,500 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 15 rpm, table width: 1,200 mm, table length: 6,000 mm, RepairFIT by Dornhöfer The difference. Djdoy Tkgbopfx Akvokr Including installation & commissioning! Machine year of manufacture: 2006 Capacities / Travel: Longitudinal (X): mm 5,500 Vertical (Y): mm 1,400 Lateral (Z): mm 1,000 Work table: Length: mm 6,000 Width: mm 1,200 Number of T-slots on the table surface: pieces 12 Width of T-slots: mm 22 Distance between slots: mm 100 Max. workpiece weight: kg 13,500 NC rotary table: Position: Right, flush integrated into the table surface Clamping surface: Ø mm 1,000 Positioning accuracy: ° 360x0.001 Max. workpiece weight: kg 3,500 Number of T-slots: pieces 9 Size of T-slots: mm 22 Distance of T-slots: mm 100 Paint finish: RAL 7035 light gray / RAL 5011 steel blue Tool interface: ISO 50, DIN 69871 AD Pull stud: DIN 69872 Form A Main drive: Drive power: 100% ED KW28 Spindle speed range: Spindle speed: min-1 15 - 5,000 Torque: Nm 815 Feeds: X, Y and Z axis mm/min 2 – 10,000 Max. rapid traverse speed: X, Y and Z axis mm/min 25,000 Max. feed force: N 10,000 Footprint FLC6000: m (approx.) 11.0 x 5.6 Overall height: m (approx.) 3.5 Weight: kg approx. 35,000 HEIDENHAIN iTNC 530 HSCI Automatic MTE milling head, diagonal Automatic tool changer Chip conveyor Coolant system with 70 bar & (IKZ) RepairFIT is our proven offer for a profitable entry into our product lines. The machines available in this line are procured by us after a strict selection process and undergo a thorough inspection (deep-dive check). After intensive cleaning, the identified obvious defects and errors were professionally repaired by our expert service team.

Year of construction: 2018, condition: new, loading capacity: max. 1.000 Kg. coil inside diam.: min. 400 mm Dkedodx Ryyopfx Akvjr coil outside diam.: max. 1.100 mm coil hight: max. 800 mm

Condition: excellent (used), Year of construction: 1991, swing diameter 400 mm Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : WMW - GLAUCHAU Hydraulic Internal Grinding Machine with Face Grinding Device model SI 6/1 AS-N x 315 year 1991 Internal grinding diameter 40 - 400 mm Internal Grinding depth, max. 315 mm Max. grindable External dia. 400 mm Weight of workpiece without steady, max. 630 kg Workpiece Swing Ø, with / without safety hood, max. 500 / 600 mm Height of centre above table 360 mm Dkjdpfx Akexyllvevjr 16 step workpiece spindle speeds 40 – 400 rpm Workpiece spindle bore, approx. 53 mm Workpiece headstock swivelling max. 30 ° Adjustment of workpiece headstock position crosswise, max. 400 mm Automatic cross traverse of grinding head 70 mm Adjustment of grinding head position on slide crosswise, approx. 100 mm Feed of grinding head, intemittendly 0.001 – 0.025 mm/stroke Feed of grinding head, continually 0,1 – 1 mm/min Table stroke, max. 630 mm Table speeds infinitely variable 0,1 – 8 m/min (10 m/min) Distance workpiece headstock and grinding slide, max. 1,250 mm Adjustment of Grinding spindel stock on table 520 mm Spindle drive, approx. 7.5 kW Total electrical load, approx. 17 kW - 380 V - 50 Hz Weight, approx. 6,000 kg Accessories / Special Features: • Universal internal grinding spindle head with automatic cycles to grind cylindrical and conical bores with one or multiple diameters, external diameters and grinding of narrow end-faces. • Face grinding device, hydraulic swivel-in, with automatic cycles to grind end-faces, multiple end-faces and two tiered end-faces simultaneously • Electronic cycle control with control tableau to set up all the grinding and dressing cycles including ampere-meters for internal grinding spindle and face grinding spindle • Belt-type grinding spindle drive with mounted grinding spindle and 5 pieces separate interchangeable grinding spindles along with various pulleys with various diameters. • Dressing device for both grinding spindles • HEIDENHAIN Digital Read-Out for the cross adjustment of the Workpiece headstock • A large amount of operating tooling and accessories as : 4-jaw Faceplate Ø approx. 520 mm, 3-jaw chuck Ø approx. 380 mm, 3-jaw-chuck Ø approx. 130 mm, pulleys, spindle sleeves, grinding flanges, foot switch, • Separate hydraulic unit, built on switch cabinet, coolant device with magnetic separator. Condition : very good, universal machine for all sorts of grinding tasks ! Please click here to view a video of the machine running : ! Delivery : immediately available, FCA Metzingen Payment : 100 % Net, after conclusion of contract, before loading

Condition: excellent (used), Year of construction: 2008, operating hours: 40,255 h, functionality: fully functional, For sale is a DMG DECKEL MAHO DMF 220 linear, a 5-axis universal travelling-column machining center. The machine was built in 2008 and was modernized / totally retrofitted in 2022 with Siemens Sinumerik 840D Solution Line control. Equipped with 5-axis simultaneous machining license, Siemens Sinamics drive technology, Siemens OP15 Black Operator Panel, MCP control panel and electronic handwheel. Technical data: Manufacturer: DMG DECKEL MAHO Type: DMF 220 linear Machine type: 5-axis universal machining center / travelling-column machining center Year of manufacture: 2008 Control: Siemens Sinumerik 840D Solution Line Modernization / Total Retrofit: Siemens CNC / drive modernization in 2022 5-axis simultaneous operation: License available Serial number: 15115223244 Machine number: 2499093 Travel X: 2,200 mm Dsdpsyuzg Hofx Akvekr Travel Y: 560 mm Travel Z: 720 mm Tool taper: SK 40 Table load: 2,500 kg Main spindle speed range: 20 - 14,000 rpm Connected load: 80 kVA Max. rated current: 115 A Fuse protection: 125 A Supply voltage: 400 V Frequency: 50 Hz AC control voltage: 230 V DC control voltage: 24 V Power-on hours: approx. 40,255 h Spindle / working hours: approx. 13,082 h CNC / drive technology: X-axis: Siemens Sinamics 160 A, 2 x SMC20 encoder module Y-axis: Siemens Sinamics 50 A, 2 x SMC20 encoder module Z-axis: Siemens Sinamics 80 A, 2 x SMC20 encoder module B-axis: Siemens Sinamics 25 A, 2 x SMC20 encoder module A-axis: Siemens Sinamics 25 A, 2 x SMC20 encoder module Spindle axis: Siemens Sinamics 26 kW, 2 x SMC20 encoder module Operator panel: Siemens OP15 Black Operator Panel MCP control panel: Siemens Electronic handwheel: Siemens Magazine technology: Magazine A: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Magazine B: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Magazine C: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Software / licenses: 5-axis simultaneous machining license Axis licenses Operator software license Equipment: Integrated swivelling table / trunnion-type table setup Paper band filter unit Coolant / filter unit Electrical cabinet Full enclosure Working area lighting Siemens control panel Condition: Machine in well-maintained condition Modernized Siemens control and drive technology 5-axis simultaneous machining available

Year of construction: 2019, condition: new, Powder coating system Mini – for beginners The Spark / ROMER® powder coating system Mini consists of: Powder oven SLS-9 small (Internal dimensions: 1200x1400x1200mm - without transport system) Powder booth KPZ-2 Delivery time: approximately 12 to 16 weeks after the order Shipping costs will be calculated individually. (Self-collection is also possible) Dsdpfx Aectx Irokvjkr To provide you with a detailed offer for a system tailored to your specific application, we require further details regarding the application and batch size. We will then promptly prepare an offer for a suitable system with the dimensions you require. Payment terms: 30% down payment and the remaining 70% upon notification of shipping readiness.

Condition: used, Year of construction: 2005, operating hours: 70,000 h, functionality: fully functional, clamping force: 4 kN, screw diameter: 70 mm, Offer-Details: Stock-No. 14171 Manufacturer Engel Dsdpfeu Awalex Akvokr Type of machine ES 2050 - 400 HL Year 2005 Working hours 70000 Controlversion CC200 Screentext German Location Eschweiler - Germany Clamping unit: Clamping force 4000 kN Size of mould platens (h x v) 1400 x 1080 mm Mould height min 350 mm Max. daylight 1300 mm Hydraulic ejector - stroke 250 mm Ejector force 83 kN Injection unit: Screw diameter 70 mm Injection pressure 1482 bar Stroke volume 1155 ccm Shot weight (PS) 1040 gr. Injection rate 419 ccm/s Screw speed 183 1/min Nozzle pressure 110 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 45 kW Dimensions and weights: Dimensions of the machine ca. 8,30 x 2,35 x 2,48 m Total machine weight 31200 kg Accessories: - Anti vibration pads - 2 x 24 zones water flower - Material hopper - degassing screw Additional Options: - Robot interface - 4 x hydraulic core pulls