CNC - Machining center

Okuma MX - 45 VAE

Condition: good (used), Year of construction: 1998, travel distance X-axis: 762 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 450 mm, controller manufacturer: Okuma OSP -U 10M, spindle speed (min.): 12,000 rpm, number of slots in tool magazine: 32, Equipment: chip conveyor, Machine is well maintained and in good working order, tools included Njdpfx Ahouqi A He Hewb

Condition: used, Year of construction: 2012, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 540 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 20 m/min, feed rate X-axis: 16 m/min, feed rate Y-axis: 16 m/min, feed rate Z-axis: 16 m/min, nominal power (apparent): 16 kVA, controller manufacturer: Heidenhain, controller model: ITNC 530, table load: 800 kg, overall weight: 5,300 kg, spindle speed (min.): 10,000 rpm, operating hours of spindle: 8,500 h, spindle motor power: 12 W, spindle nose: ISO B40, number of spindles: 1, number of slots in tool magazine: 24, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, Machine in very good condition and maintained by the manufacturer. Available immediately. Renishaw probe Video available on request. Nedpfx Ajwxrgtoh Hewb Delivery and installation by us possible.

Condition: like new (used), Year of construction: 2022, operating hours: 850 h, functionality: fully functional, turning length: 610 mm, turning diameter over cross slide: 500 mm, turning diameter: 725 mm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 260 mm, feed length Y-axis: 80 mm, feed length Z-axis: 610 mm, torque: 250 Nm, bar passage: 65 mm, Equipment: documentation/manual, rotational speed infinitely variable, For sale: As-new EMCO MAXXTURN 65-G2 SMY, year of manufacture 2022, equipped with Siemens Sinumerik ONE CNC control featuring ShopTurn! CNC turning center for complete machining of turned/milled parts. Key features include: - Integrated spindle motors, counter-spindle, water-cooled (preloaded roller guides) with Y-axis, operative on main and sub-spindle - Latest SINUMERIK ONE control with ShopTurn conversational programming Main Spindle: - Max. bar capacity: 65 mm - Max. torque: 250 Nm - Speed range: 0–5000 rpm Sub-Spindle: - Drive power: 22 kW - Max. torque: 130 Nm - Speed range: 0–7000 rpm Tool Turret: - 12-station VDI 30 radial turret with directional logic for up to 12 driven toolholders - Max. drive power: 6.7 kW - Max. torque: 25 Nm Nwjdpfx Aex E Dncjh Heb - Max. speed: 5000 rpm Y-Axis: - Travel: ±40 mm Additional Equipment: - Hollow chuck cylinder incl. draw tube - C-axis for both spindles - Sinumerik ONE / OPERATE control - 22" multi-touch display - ShopTurn, 3D simulation, remnant material detection - USB interface - Electrical cabinet climate control - Coolant system incl. pump (3.5 bar) - Chuck flushing (extra pump 3.5 bar) - Parts ejector and flush through sub-spindle - Hydraulic unit - Interface for chip conveyor - Documentation and CE certificate - Control languages: German / English - Electronic handwheel - EMCO TOOL BREAKAGE AND WEAR MONITORING / SINUMERIK ONE - Alternating spindle speed - Sub-spindle as tailstock: This cycle allows use of the sub-spindle with mounted live center for workpiece support, permitting shaft machining even on machines without a conventional tailstock. Max. support force limited to 50% of maximum axis force. - EMCO PROFI-NET ROBOTIC INTERFACE: Connection interface for robot integration via HARTING connector. Signal exchange via Profinet. Safety signals: 2-channel/potential-free. - Digitalization package for Sinumerik: Condition monitoring - SIEMENS ONE INTERFACE for connection to MDE/BDE systems. Standard info includes: • Machine on - AUX ON • Automatic mode • Production mode - program active • Program running and override between 95–105% • Part count pulse (M30) • Programmable pulse (M300) - 3D machine data / MT65-G2: 3D model of the machine included Pneumatically actuated finished parts catcher for gentle unloading of finished components. Parts are transported to a collection box (standard) or onto a conveyor belt (optional). - Max. finished part length: 175 mm - Max. finished part diameter: 65 mm - Max. finished part weight: 4.5 kg INTERFACE SL1200 HT65-DT/TT + MT65-1000: For connecting the EMCO SL1200 bar feeder. Etc. The machine is immediately available!

Condition: excellent (used), Year of construction: 1993, max. edge thickness coils 0.2 - 3 mm max. edge thickness solid strips15 mm feed speed 12/ 18 m/min glue plot heating time approx. 6 min autom. strip magazine coil magazine granulate heating pot flush trimming unit radius trimming unit operating panel extendable work piece support Nwjdpfx Ajfbr S Roh Hsb noice cancelation hood machine length 3800 mm Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: excellent (used), Year of construction: 2002, OKUMA Euro Center V50 Year of construction 2002 Control system OSP-U100L Travel distances X-1020 Y-510 Z-525 Table load 680kg Clamping surface 1200x510 Tool changer 20 magazine places Nodpfjrfw Nhjx Ah Howb chip conveyor

Condition: used, Module milling cutter Module 8 20 degrees Length 1800 mm Nsdpfx Ajdklt Nsh Hewb Diameter 120 mm inside 40 mm

Condition: like new (used), Year of construction: 2019, functionality: fully functional, For Sale. Ficep Tipo G25LG. Full description Is attached as a document. Year of construction: 2019 With this line, the input and output is the following length: Nedpeu Dw I Esfx Ah Hswb Input: 8M Output: 8M If you want more pictures or information please contact us.

Condition: as good as new (ex-display), Year of construction: 2008, machine/vehicle number: LSP 100T, Productions-Hydraulic press with H-column 100t with guidance Manufacturer: Stenhoj Denmark Year of construction: 2008 Pressure force max. 1,000 kN / 318bar Nedpfeg Rn Efsx Ah Hjwb Press cylinder, stroke length: 400mm Press table with T-slot 1,500x900mm above 1,500x1,050mm below Stand passage 1,700mm Condition as good as new, the machine was only used for test runs and has been in stock since then. All statements without guarantee. Without transport costs.

Condition: excellent (used), Year of construction: 2006, Clamping force: 500 t Screw diameter: 80 mm Platten dimensions: 1300 x 1200 mm Nwodpfxova H Amj Ah Hob Distance between tie bars V: 900 mm Distance between tie bars H: 900 mm Shot volume: 1779 cm3 Shot weight: 1620 g Injection pressure: 1855 bar Working hours: 46.511 Type: Horizontal Drive: Hydraulic

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: n.n.b., color channels: 2, paper weight (min.): 40 g/m², paper width (min.): 100 mm, paper width (max.): 520 mm, paper height (min.): 900 mm, paper height (max.): 370 mm, total length: 2,700 mm, total width: 2,034 mm, total height: 1,720 mm, space requirement length: 3,700 mm, space requirement width: 3,000 mm, space requirement height: 2,220 mm, counter reading (black): 1,150, type of input current: AC, input current: 16 A, input voltage: 200,210,220 V, Equipment: documentation/manual, Hans Gronhi GH522 Purchased from the second owner, who had taken over the company from the first buyer. This second owner never reinstalled the machine in their print shop; it was stored in a corner for about four years. Recently, I acquired this machine together with some other equipment. To ensure the memory card and electronics were still functioning, I tested the machine with plain paper. All functions operated correctly: press on/off, photocells, and other controls. A video of the test run can be sent via WhatsApp or downloaded from my Dropbox. Unfortunately, Machineseeker does not allow me to share such links directly via their platform. If required, I will try to contact you via WhatsApp using your phone number. More photos with big data also available. Machine details: Type: Hans Gronhi GH522 Serial number: currently unclear (to be checked once in warehouse) Year of manufacture: 2010 (based on PCB markings, see photos) Delivered to first owner: March 2012 Total impressions: to be verified after arrival in warehouse (estimated under 15 million) Max. sheet size: 520 x 370 mm Min. sheet size: 148 x 100 mm Plate size: 520 x 370 mm Dimensions (L × W × H): 170 × 203 × 165 cm (including steps) Weight (incl. packing): approx. 4,200 kg Condition: To be dismantled coming week and then transported to our warehouse in Son en Breugel, The Netherlands (zip code 5692 CC). Very good and clean condition. Rubber rollers are mostly original, with approx. 50–60% life remaining. Mainly printed 2-colour jobs, so rollers have not been washed excessively. No damages on cylinders, gears, or bushes. Well maintained, never involved in accidents. Features: Stream feeder with suction belt feed board Mechanical and ultrasonic double-sheet detection Mechanical pull side lays Nwodsw R Enmjpfx Ah Hob Continuous monitoring at front lays Semi-automatic plate loading with pre-load facility Automated ink sweep with pre-inking facility Precision laser-cut segmented ink keys Automatic roller wash (programmable) Continuous dampening system with oscillating bridge roller and pre-damp facility Optional integrated or separated dampening during production Speed-compensated dampening Automated refrigeration/recirculation/dosing unit BEIERXIN (1 unit) Cylinder movement: circumferential, lateral, and diagonal Quick-release blanket clamping Touch screen controls Programmable pre-dampening cycle Powder spray unit with heated reservoir and vibration Three motorised suction slow-down devices Sheet de-curler Air shower in delivery Central oil lubrication system Pneumatic controlled operation (small compressor included) Seperate stand alone PUNCHING unit included Packing & delivery: Machine will be professionally packed and strapped on a heavy duty pallet and additional equipment on EURO palletboxes Loaded on your transport Pricing & conditions: Fixed price: € 12,000 LOT (Loaded on Transport, Incoterms). Down payment: 20% (€ 2,400) as deposit. Proforma invoice: Deposit invoice valid for 5 working days. Please supply full company details to issue the invoice.