Vertical Machining Centre

Okuma MB-56VB

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, OKUMA OSP-P300M control Table dimensions: 1300 x 560 mm Maximum table load: 900 kg X-axis travel: 1050 mm Y-axis travel: 560 mm Z-axis travel: 460 mm Spindle speed: 12,000 rpm SIM: SK50 Magazine capacity: 32 Power consumption: 22.2 kVA / 400V Total weight: 7700 kg Dimensions (L x W x H): 2900 x 2450 x 2900 mm Accessories and equipment: - Chip conveyor - Coolant system - Transformer - Some tool holders with drawbars Ijdpfx Aoyvr N Nohvehw - Spindle cooler - Lifting hook - Manuals The machine is being sold due to company closure.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 1105876, SPECIFICATION Table size 914mm x 356mm Maximum table load 1316Kg Isdpfx Asx Sq Sbohvjhw X axis traverse 762mm Y axis traverse 406mm Z axis traverse 508mm Spindle BT40 Spindle speeds 0 -8,100rpm Spindle motor 14.9kW Rapid feed rate 25.4m/min Toolchanger capacity 24 + 1 tools Tool to toll time 2.8 seconds Approximate weight 3500Kg MACHINE EQUIPPED WITH: - Haas TRT 160 5 axis trunnion table (removable) Wireless intuitive probing system Remote jog handle Swarf auger High speed machining Programmable coolant nozzle Lighting Guarding Manual Feed cutting time 11,436 hours

Condition: good (used), Year of construction: 2015, operating hours: 35,800 h, functionality: fully functional, Doosan Lynx 220LSY – Sub-spindle CNC lathe SPECIFICATION Control: Fanuc 0iTD Main spindle max. speed: 6,000 rpm Main motor power: 15 / 11 kW Driven tool power: 3.7 kW Number of tool stations: 12 (24 positions) 3-jaw hydraulic chuck: 170 / 135 mm Swing diameter (bed/turret): 600 / 400 mm Max workpiece: Ø 300 x 510 mm Max bar diameter: 51 mm Rapid traverse (X/Y/Z): 36 m/min Y-axis travel: ±52.5 mm Iedpfx Aoya Hqbohvjhw Turret indexing time: 0.11 sec Travel ranges: - X: 205 mm - Z: 560 mm Equipment: High-pressure coolant, 0.7 MPa Transformer Chip conveyor Tool setter Collet chuck (with 3 collets) Bar feeder for rods up to 1.5 m Workpiece ejector Workpiece catcher and outfeed system Tool load monitoring

Condition: used, Year of construction: 1998, centre height 125 mm centre distance 400 mm Control FANUC 21i Capstan diameter max. 406 mm wheel dimensions 406 x 127 x 40 mm workpiece weight 30 kg longitudinal slide -travel 483 mm cross slide - travel 254 mm total power requirement max. 20 kVA weight of the machine ca. 4,0 t dimensions of the machine ca. 3,0 x 2,0 x 2,1 m including 2 Pcs. internal grinding spindle incl. B axis 1° Hirt, controlled incl. C-axis incl. Quick-Set Probe including Sensitron including Magnetic Jaw including hydraulically foldable dresser including other small accessories including documentation without a coolant system, as it was previously connected to a central unit Power On hours approx. 71,000 h Iedpfexwdwfsx Ahvjhw Spindle hours approx. 25,900 h

Condition: good (used), Year of construction: 2008, HAAS VF-5D / 40 MACHINING CENTER TRAVELS : X : 1,270 mm Y : 660 mm Z : 635 mm DISTANCE BETWEEN PLANE – TABLE AND SPINDLE NOSE : 178 – 813 mm TABLE : DIMENSIONS : 1,321 x 584 mm LOAD CAPACITY : 1,815 mm NUMBER AND SIZE X PITCH OF T-SLOTTS : 7.14 X 80 mm SPINDLE : ROTATIONAL SPEED : 8,000 RPM SPEED RANGES : 2 Iedpfevf Nw Dsx Ahvshw SPINDLE NOSE : ISO 40 HIGH PRESSURE / INTERNAL COOLANT FEEDS : RAPID SPEED : 18,000 mm / min. WORKING SPEED : 12,700 mm / min. JOG : 0 – 1,260 mm / min. TOOL MAGAZINE : 24 POSITIONS POWER : 15 KW WEIGHT : KG. 7,000 YEAR OF FIRST INSTALLATION : 2008

Condition: reconditioned (used), Year of construction: 2025, functionality: fully functional, travel distance X-axis: 838 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 406 mm, spindle speed (min.): 50 rpm, quill travel distance: 127 mm, table width: 299 mm, table length: 1,245 mm, overall weight: 1,000 kg, input voltage: 400 V, warranty duration: 6 months, Rebuilt Bridgeport Milling Machine 2HP Variable Speed Fully Rebuilt Head And Machine Table has been reground on 3 Sides Bed ways have been reground and re scrapped in Brand New Lead Screws imperial X & Y & Z New Lead screw bushes imperial X, Y & Z Table Size 42” X 9” 50-4200rpm Brand New X Axis Powered Traverse Brand New Y Axis Powered Traverse Ijdpfsw Id U Hex Ahvshw Brand New 2 Axis Digital Readout ( X & Y Axis ) Brand New Coolant Pump & System Brand New LED Worklight Hand Pump Lubricated Ways ( Re piped) Reground R8 Spindle Taper Coolant Tray Power - 3 Phase 400v (original wiring & Motor Pre CE) Comes with a techno piu machine safety guard fitted as shown in the photo which is interlocked Fully Serviced Ready For Work Head has been fully stripped down and rebuilt new shafts, new bearings , belts & Super Precision Spindle Bearings Replaced Warranty Included

Condition: excellent (used), Sub-spindle, Y-axis, C-axis FANUC 18i-TB control Turning diameter max 250 mm Turning length -555 mm Chuck Diameter -165 mm Main-spindle speeds 50-4'500 rpm Sub-spindle speeds 5'000 rpm Turret head 1+2: 24 positions with 12 driven positions each Tool presetting device Barloader Piece catching device Misc. accessories Ijdpox A Eupjfx Ahvohw MARCELS MASCHINEN CH

Condition: excellent (used), Year of construction: 2007, Okuma MB-46VAE Machining Center Year of manufacture: 2007 Control: OKUMA OSP P200-M Iedpfx Ahjxwtp Dsvshw Table size: 1000 x 460 mm X travel: 762 mm Y travel: 460 mm Z travel: 460 mm Table load capacity: 700 kg Spindle cooler Taper: MAS BT40 Magazine with 42 tool stations Weight: 6500 kg Dimensions LxWxH = 2750 x 2160 x 2715 mm

Condition: ready for operation (used), Year of construction: 2014, operating hours: 5,316 h, spindle speed (max.): 4,000 rpm, travel distance X-axis: 213 mm, travel distance Y-axis: 51 mm, travel distance Z-axis: 572 mm, number of axes: 3, This 3-axis HAAS ST-20Y was manufactured in 2014. It features a CNC lathe with C and Y-axis capabilities, a spindle speed of 4000 rpm, and a chuck size of 8 inches. Additional features include a 12-station turret, chip conveyor, and a programmable hydraulic tailstock. Ideal for precision turning operations. If you are looking to get high-quality turning capabilities consider the HAAS ST-20Y machine we have for sale. Contact us for more information about this machine. • Chuck size: 8" (210 mm) • Programmable hydraulic tailstock: MT4 • Standard program memory: 1 GB Additional equipment • Chip conveyor • Automatic tool presetter • Part catcher Ihsdpfxsx D Nzpj Ahvew • USB port • 6 live tools (3 axial and 4 radial) • BOT holder and VDI holder

Condition: ready for operation (used), Year of construction: 2016, Control Unit Ihsdpsx D R Uwefx Ahvow Brand OKUMA Model OSP-P300S-H Movement Y-Axis Movement 160 Additional Equipment Y-Axis Machining Kit: Helical interpolation /Y-axis turning function with offset turning toolholders/ Coordinate conversion /Double pressure clamping system for main spindle chuck via M-codes (irreversible) /Double pressure clamping system for sub-spindle chuck via M-codes (irreversible) 60 tool ATC / High-pressure coolant preparation: 70 bar/ External coolant pump: 0.8 kW, 6 bar, 20 L/min/ Electric spindle orientation /Air blast for chuck cleaning Collision Avoidance System (CAS)/Chip Conveyor Preparation/Big Bore Spindle ASA 6": 22/15 kW, 3800 rpm/ High-precision C-axis positioning/ Continuous B-axis/ Tool Magazine with 60 positions/ 0.1 Micron Resolution Software/ API Library 2 for OSP-P300S/ Standard Right Side Chip Conveyor/ 15 Bar Coolant Pump 20 L/min/ Filtration unit with 4 fabric filter bags (25 micron), pump 15 bar, 20 L/min SCHUNK ROTA THW+260-81R A8 chuck with KITAGAWA SS1770 cylinder for Big Bore main spindle SCHUNK ROTA THW+215-66 A6 chuck with KITAGAWA SS1452 cylinder for sub-spindle 5-Axis Machining Kit: Super NURBS on 5 axes /Vector control /DNC-DT interface /Tool position control/ 3D coordinate transformation /Helical interpolation (includes inclined plane profile software) This 5-axis OKUMA MULTUS B300 II W was manufactured in 2016. It features an ASA 8 spindle offering 5,000 rpm and 65 mm bar capacity, capable of handling a max turning diameter of 630 mm. It includes a high-pressure coolant preparation of 70 bar, a continuous B-axis with HSK63, and a tool magazine with 60 positions, optimizing both turning and milling capabilities. If you are looking for high-quality turn-mill operations, consider this OKUMA machine. Contact us for more information about this machine. Application Types Turning