Okuma GENOS L200E-M

Okuma GENOS L200E-M

Condition: ready for operation (used), Year of construction: 2011, spindle speed (max.): 4,500 rpm, travel distance X-axis: 210 mm, travel distance Z-axis: 380 mm, controller manufacturer: OKUMA, controller model: OSP‑P200LA‑R, number of axes: 3, This 3-axis Okuma GENOS L200E-M was manufactured in 2011. It features a maximum turning diameter of 200 mm and a Z-axis travel of 380 mm. The machine is equipped with a 12-station turret with driven tools, allowing for milling and drilling on the C-axis. If you are looking to get high-quality turning capabilities, consider the Okuma GENOS L200E-M horizontal turning center we have for sale. Contact us for further details. • Turning configuration: 2 axes (X, Z) + C‑axis; no Y‑axis • Tailstock: Equipped • Tool presetter: Automatic tool presetter installed • Turret: 12‑station turret with driven tools (milling and drilling on C‑axis) • Max. turning diameter: 200 mm • Spindle nose: ASA A2‑6 • Spindle bore diameter: approx. 50 mm • Electrical supply: 380 V, 3‑phase, 50/60 Hz • Average apparent power: 17.7 kVA • Full‑load current: 26.7 A Iedpjy Rrwvjfx Abnoba • Max. motor current draw: 45 A Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2005, spindle speed (max.): 6,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 590 mm, number of axes: 6, This 6-axis MORI SEIKI NL2000SY/500 was manufactured in 2005, featuring X-axis travel of 260 mm, Z-axis travel of 590 mm, spindle power of 5.5 kW, and a spindle speed of 6,000 rpm. It includes a 12-position tool turret. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI NL2000SY/500 machine we have for sale.Contact us for more information. Ibsdjx D R Auopfx Abnoa • Tool turret: 12 positions

Condition: used, Year of construction: 1996, operating hours: 7,827 h, functionality: fully functional, machine/vehicle number: 119713, turning diameter over cross slide: 160 mm, turning length: 244 mm, turning diameter: 160 mm, spindle bore: 45 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 1 rpm, travel distance X-axis: 155 mm, travel distance Z-axis: 290 mm, spindle motor power: 10,000 W, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 6,000 rpm, total height: 1,780 mm, total length: 2,000 mm, total width: 1,330 mm, quill travel distance: 150 mm, quill diameter: 55 mm, quill stroke: 150 mm, workpiece weight (max.): 25 kg, overall weight: 2,700 kg, bar passage: 40 mm, chuck outer diameter: 154 mm, bar diameter (max.): 45 mm, spindle diameter: 50 mm, Equipment: documentation/manual, rotational speed infinitely variable, The Mazak Quick Turn 10 is a compact CNC lathe manufactured by the Japanese company Mazak. It has been specifically developed for the precise machining of small and medium-sized turned parts and is widely used in mechanical engineering, toolmaking, as well as in series production. The machine features a robust slant-bed design, a tool turret, and the dialog-based Mazatrol control system, which enables fast programming directly at the machine. This makes it suitable both for single parts and small series production. Control: Mazatrol T-Plus Standard chuck: Kitagawa N-06A0515 The quoted price does not include dismantling, packaging, or shipping. Sale ex location, subject to prior sale. The machines are sold in used condition; any warranty and guarantee are excluded. Ibsdpfsyt E Nvsx Abnja

Condition: ready for operation (used), Year of construction: 2023, operating hours: 346 h, number of axes: 5, This 5-axis Hurco CNC TMX 8 MYSi was manufactured in 2023. It features a maximum turning diameter of 508 mm and a turning length of 560 mm, with a main spindle speed of 4,500 rpm and a sub-spindle speed of 6,000 rpm. The machine includes a tool turret with 12 stations and a rapid traverse of 24 m/min in the X-axis. If you are looking to get high-quality turning and milling capabilities, consider the Hurco CNC TMX 8 MYSi turn-mill centre. Contact us for further details. • X-axis travel: 203 mm • Y-axis travel: ±55 mm • Z-axis travel: 560 mm • W-axis travel: 640 mm • Rapid traverse X/Y/Z/W: 24 / 12 / 30 / 30 m/min • Positioning accuracy: 0.01 mm • Repeatability: 0.005 mm • Max turning diameter: 508 mm • Max turning length: 560 mm • Max part diameter over bed: 335 mm • Tool turret: VDI 40 • Number of stations: 12 • Max driven tool speed: 5000 rpm • Driven tool power: 6.3 kW • Driven tool torque: 28 Nm • Main spindle max speed: 4500 rpm • Sub-spindle max speed: 6000 rpm • Synchronous spindle speed: 2500 rpm • Main spindle power (S6 / S1): 25 / 17.2 kW Iedoym T Itepfx Abnoba • Sub-spindle power (S6 / S1): 15 / 11 kW • Main spindle torque (S6 / S1): 239 / 164 Nm • Sub-spindle torque (S6 / S1): 102 / 75 Nm • Main spindle chuck size: 203 mm • Sub-spindle chuck size: 150 mm • Main spindle bar capacity: 64.5 mm • Sub-spindle bar capacity: 46 mm • Electrical supply: 400 V, 50 Hz, 3 phase • Largest motor: 22 kVA • Largest motor current: 32 A • Full load: 58 kVA • Full load current: 83 A • Short circuit rating: 5 kA RMS symmetrical • Interrupt capacity: 10000 A • Max ambient temperature: 35 °C • Coolant tank capacity: 203 L • Machine weight: 7500 kg • Transport weight: 8250 kg • The BMT65 mounts are included; swivel mounts are not.

Condition: excellent (used), With Sub-spindle With C-axis, with Y-axis With driven tools FANUC/MORI MSX 501 control Turning diameter max 190 mm Turning length -235 mm Spindle speeds 50-5'000 rpm Top turret tool holders 1+2 with 16 driven positions Bar loader FMB Turbo 8-80 Workpiece pick-up device Tool presetting device Misc. accessories Ijdpfx Abox I A Awjnsba MARCELS MASCHINEN CH

Condition: used, Year of construction: 2010, turning diameter over bed 0316 mm turning length 340 mm control ultimax Hurco turning diameter over bed slide 240 mm swing dia. 402,5 mm spindle turning speed - stepless 0- 6000 U/min- rpm spindle bore 45 mm feeds 0- 30 m/min Ibsdjydqpiopfx Abnja voltage 400 V connected load 14 KW face slide travel 185 mm longitudinal travel 340 mm dimensions of the machine ca. 3,76 x 2,92 x 2,15 m taper diameter VDI 20 mm main drive motor 11,5 kW weight of the machine ca. 3,2 t Machine has 12 position turret and a bar loader.

Condition: ready for operation (used), Year of construction: 2014, operating hours: 30,222 h, total height: 3,240 mm, overall weight: 8,880 kg, This 3-axis Hurco VMX 50i was manufactured in 2014, featuring a robust table size of 59 x 26 inches and a maximum spindle speed of 12,000 rpm. It supports a tool capacity of 40 with a rapid tool-to-tool ATC time of 2 seconds. Ideal for precise, heavy-duty machining with a maximum table load of 4,410 lb. If you are looking to get high-quality milling capabilities consider the Hurco VMX 50i machine we have for sale. Contact us for more information. • Table Size: 1500 x 660 mm • T-Slots: 6 x 18 mm • Maximum Weight on Table: 2000 kg • Spindle Nose to Table: 101 mm • Maximum Spindle Speed: 12000 rpm • Spindle Power (15 min/Continuous): 15 kW / 11 kW @ 720 rpm • Spindle Torque (15 min/Continuous): 198.9 Nm / 116.7 Nm @ 720 rpm • Tool Type: CAT 40 / Big Plus® • Tool Capacity: 40 • Maximum Tool Diameter: 76 mm Iodpfox D E Eqsx Abnjba • Maximum Tool Length: 300 mm • Maximum Tool Weight: 7 kg • Tool-to-Tool ATC Time: 2 sec Dimensions Machine Depth 5055 mm

Condition: excellent (used), Year of construction: 2013, Spinner TC600-65MC cnc lathe with C-axis and driven tools Year: 2013 Technical details: Control SIEMENS 840D-SolutionLine Spindle speed range: 4500 rpm Spindle motor power: 11 kW/ 16.5 kW Torque: main spindle (siemens, s6 40%) 301 Nm X-Axis Movement: 230 mm X-Axis Rapid Traverse: 15 m/min Z-Axis Movement: 740 mm Z-Axis Rapid Traverse: 24 m/min Center distance: approx. 600 mm Max turning diameter: 310 mm Workpiece diameter over bed: 425 mm Number of turrets: 1 Tool taper: DIN 69880/ VDI30 Number of turret stations: 16 Driven tool holder positions: 16 C-axis Speed of rotating tools: 6000 1/min Driven tool power: 6 kW Tailstock: Quill stroke: 120 mm Adjustment travel: 475 mm Machine dimensions: 2730x1500x1620mm Machine weight: 4500 kg Accessories/options: - hydraulic chuck with jaws - collet type chuck with collets - static tool holders - driven tool holders - Renishaw tool measuring arm - Swarf conveyor - High pressure coolant system - Bar feeder - Documentations - Parts cather Iedpfx Abjy Sv Egonoba Under power in our warehouse!

Condition: good (used), Year of construction: 2016, functionality: fully functional, Controller MAX5 DSM (2 x 19" screens) Table size 762 x 406 mm X-axis travel 660 mm Y-axis travel 406 mm Z-axis travel 508 mm Spindle speed 10 – 12000 rpm Tool magazine 20 positions Tool holder SK40 Rapid traverse X/Y/Z 28 m/min Power 9,4/11 kW Footprint 2000 x 1800 x 2600 mm Machine weight 2850 kgs Accessories Ijdpjy Du I Rofx Abnoba - Software options: 3D, DXF, AVG (realistic graphics), pockets/islands, ramp function, rigid tapping, cutting, tool and material database, NCPP and ISNC (macro ISO code programming), Ultimotion - MPG - Coolant water system - Chip auger - Signal light - Machine feet

Condition: excellent (used), Year of construction: 1998, turning diameter 410/ 440 mm turning length 950 mm control Siemens / Weiler D2 workpiece weight max 900 kg spindle head Gr 6 MK 6 spindle bore 54 mm face stroke 230 dia. of quill MK 4 mm quill stroke 120 mm centre height 200 mm thread pitch max. in mm 0,1 - 250 mm spindle turning speed - stepless 1 - 3000 U/min total power requirement 12 kW weight of the machine ca. 2,1 t Iedpfsyrh Apjx Abnoba dimensions of the machine ca. 2,3 x 1,5 x 1,8 m