Convection Oven

Nabertherm N500/65HA

Condition: used, Pallet with 18H7 T-slots, suitable for DMG DMC 100 H and DMG DMC 100 U as well as DMC 125H/U Duoblock. Kjdpfx Aoqx Uh Nsktodl More than 10 pallets available.

Year of construction: 1987, condition: used, Kehren rotary table type RS 7C, second-hand manufacturer: Kehren, Honneff Comm.: 4179 year of construction: 1987 Control: Siemens 3G SPS: Siemens S5 grinding motor: BBC QUB 200 Kjdshgmwgopfx Aktedl rotary table ø: 750 mm ø grinding head:460 mm Control panel with screen Coolant system Flushing pump Coolant pump Automatic paper belt filter system Control cabinet

Condition: used, CNC cycle controlled lathe HARRISON type Alpha 400 Plus Kdsdpeh Hvk Aefx Aktjl Machine No. P30180/150 Year of construction 1998 center distance 1250 mm turning diameter over bed 400 mm center height 200 mm Swing diameter over cross slide 245 mm Swing diameter in the bend 585 mm bed width 313 mm face travel (X-axis) 250 mm Tailstock spindle diameter 73 mm Tailstock quill stroke 140 mm Tailstock quill mount MK 5 spindle bore 54 mm spindle head size Camlock D1 size 6 Spindle speed 20-2500 rpm. Spindle speed range (stage 1) 15-275 rpm. Spindle speed range (stage 2) 35-795 rpm. Spindle speed range (level 3) 110-2500 rpm. Feed rate X and Z 0.03 - 0.6 mm/rev. Rapid traverse speed X axis max. 2000 mm/min. Rapid traverse speed Z-axis max. 4000 mm/min. Threading function Metric / Inch / Diametral / Module Spindle drive power 7.5 KW Mains connection 400 Volt, 50 Hz, 23,5 kVA - cycle control Harrison Alpha / GE FANUC - language in French (France) - automatic gear range shifting in 3 steps (15-275, 35-795, 110-2500 rpm.) - electronic handwheels with different transmission ratios (1/10/100) - 3-jaw face spiral lathe chuck FORKARDT Ø 250 mm type CSN, 1 set of soft top jaws - quick-change tool holder MULTIFIX size B with 2 inserts - 1 piece of centering point running with the tool - 1 piece quick-action drill chuck RÖHM, 3-16 mm - hinged lathe chuck guard - hinged working area protection doors - chip tray with coolant device under the machine bed - Switch cabinet fixed to the machine - Interface RS 232 Space requirement L x W x H 2600 x 1450 x 1550 mm weight 1950 kg good condition

Year of construction: 1999, condition: ready for operation (used), Volume: 1000l, max. temperature: 750°C, heating capacity: 40kW, machine dimensions X/Y/Z: approx. 2500mm/1600mm/1900mm, weight: approx. 2000kg. Documentation available. An on-site inspection is possible. Expected to be available from October/November 2025. Ksdpfjw Emyzjx Aktedl

Year of construction: 2001, condition: good (used), 1 used hardening furnace Manufacturer: Nabertherm, Type N 321 Serial Number: 160897, Year of manufacture: 2001, Max. temperature: 1,200°C, Connected load: 400V, 47 kW Internal dimensions: 750 x 1100 x 400 mm Usable volume: 320 liters Weight: approx. 1.6 t Dimensions: Length approx. 2 m, width approx. 1.5 m, height approx. 2 m, Kdjdpfx Akjxpf I Notel

Year of construction: 2019, condition: like new (used), MUT RWO 360/400-1150 retort heat treatment furnace - As good as new: hardly used - Documentation available (both electronic and physical) - Pallet with spare parts incl. TECHNICAL DATA Plant type: RWO 360/400-1150 Furnace chamber temperature: ≤ 1150 °C for max. 1 hour. Working temperature: ≤ 1100 °C , ≤ 1050 °C in vacuum. Control constancy: ± 2 K Temperature homogeneity: ± 6 K in the range from 600 °C to 1150 °C at the end of the settling period Control voltage: 230 VAC / 24 VDC Working space furnace: 360 x 400 mm Loading: ≤ 50 kg Heating: three-zone Pressure: ≤ 350 mbar Final pressure vacuum when cold: < 5 * 10-5 mbar with clean, dry furnace. Installation area: 900 x 1900 x 3000 mm Total plant weight approx.: 1500 kg Sound pressure level: < 70 dB Kdodpeiryyaofx Aktjl We do not assume any liability for the correctness, completeness and topicality of the information.

Year of construction: 2026, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 Kdjdpfx Akjfy T H Iotsl 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: refurbished (used), Our Pfeiffer Vacuum Okta 6000 Roots-blower pumps will: be good as new be checked after the manufacturer's specifications, for example its tolerances be fitted with new wear parts Kedpfx Aksfq D H Sstodl be available at short notice included one-year warranty

Condition: new, Year of construction: 2026, Recirculating chamber furnace, electric, brand new, delivery time 16 weeks - Maximum temperature: 300°C - Internal dimensions (W x D x H): 2100 x 2100 x 2000 mm - Capacity: 8,820 liters Kjdpfev Hg Euex Aktodl - Eurotherm Nanodac controller/recorder with color touch display - 2 circulating air fans - Double door with safety door sensors - Over-temperature protection, Eurotherm 3216i - 2 fresh air fans - Automatic dampers - Electrical configuration: 400 V / 50 Hz / 3NPE - Increased heating capacity of approx. 70 kW - Temperature accuracy: +/- 6 K in the empty oven - Documentation and CE declaration of conformity - Electrical schematic with spare parts list Note: The oven floor is not insulated but is covered with stainless steel sheet. This allows unrestricted access with all track widths. Alternatively, an insulated floor can be offered (with entry rails to be defined by the customer). We offer new and used industrial furnaces, which we can also modify and upgrade according to customer requirements. Keywords: oven, ovens, drying oven, industrial furnace, drying cabinet, heating oven, heat cabinet, recirculating oven, chamber oven, heating chamber, chamber recirculating oven, tempering oven, annealing oven.

Condition: used, pressure 160 t passage width / mm stroke / mm Working height 800 mm total power requirement 15 kW weight of the machine ca. 11,8 t - Table size: 1000x1000mm - Distance table/ram, large stroke above, gain. above: 800mm extra information Ksdpfx Aksiulkqetsdl Removable table