Press brake

MVD 2100 X 60 Ton

Condition: new, Year of construction: 2024, Bending force: 320 t Year of manufacture: New (delivery time 6-8 weeks) Control system: DT 15 Bending length: 3050 mm Distance between columns: 2600 mm Djdpfxsfifg Hj Akvswa Y rapid traverse speed: 160 mm / s Y working speed: 10 mm / s Y return speed: 140 mm / s Motorized crowning Table length: 630 mm Table width: 154 mm Table height: 900 mm Stroke: 365 mm Overhang: 410 mm 2 support arms 2 rear stop fingers Travel speed X-axis: 250 mm / s R-axis working speed: (max.) 140 mm / s R-axis travel: 250 mm Standard equipment: Y1, Y2, X (3-axis) Y1, Y2, X = 650 mm (double guide, aluminum) D-BEND software for 3D bending simulation and alignment Manual crowning R-axis, manual Motorized rear stop with linear guide and ball screw Rear stop finger with height adjustment (R-axis, manual) CE upper tool holder system (upper tools) Front support arms for sheet metal, sliding (with T-slot and stops) Hydraulic blocks and valves in special design, in accordance with worldwide applicable standards Electrical equipment, in accordance with worldwide applicable standards Option: CE standard with manual Fiessler AKAS II M -FPSC-B-C (SAFETY PLC) CNC motorized crowning Y1, Y2, X, R (4-axis) CNC motorized crowning Motor power 37 kW Oil tank capacity 250 liters Length 4300 mm Width 1820 mm Height 3230 mm Weight approx. 17250 kg

Condition: like new (used), functionality: fully functional, Year of construction: 2024, control type: NC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: SIEMENS, controller model: PLC, number of rollers: 4, roller (bottom) diameter: 150 mm, roller (top) diameter: 150 mm, side roll diameter: 140 mm, roller diameter: 150 mm, roller length: 2,050 mm, working width: 2,000 mm, roller height adjustment: 18 mm, working height: 800 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 4 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 6 mm, sheet thickness copper (max.): 6 mm, overall weight: 2,800 kg, total length: 3,800 mm, total width: 1,200 mm, total height: 1,100 mm, power: 3 kW (4.08 HP), input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 4, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, 4 ROLL BENDING MACHINE NC HYDRAULIC MODEL 2000X6 MM / 4 MM PREBEND PROGRAMMABLE AUTOMATIC ROLLING NC 4 AXIS CONTROLLER Capacity: plate width 2000 mm thickness rolling 6 mm pre-bending 4 mm minimum diameter of rolling D= 180 mm depending on the plate thickness and strength Rollers length 2050 mm Upper roll size 150 mm Lower roll size 150 mm Dedpew Hpzwsfx Akvswa Rollers hardened surface high strength smooth surface finishing suitable for rolling stainless steel quality plates Conical plate rolling attachment Rotation electric powered on central rollers for bending traction of the plate Pre-pinch load variable upon plate thickness and strength Console electric commands push buttons with digital readout of the 4 rollers on the screen. NC programmable 4-axis to set automatic rolling with save 200 programs in memory front side hydraulic opening to remove the rolled shells speed slow/fast variable safety installation with emergency stop. Instruction manuals for operation and service. Layout mm 3800x1200xH1100 mm Weight 2800 Kgs

Condition: new, Year of construction: 2026, Two-Shaft Shredder GL32120 – 30 kW + 30 kW – NEW SHREDDER EQUIPPED WITH HYDRAULIC PRESSURE (PLEASE REFER TO THE ATTACHED TECHNICAL DRAWING OF THE MACHINE) Dwsdpfx Aovpua Sskvsa GrabTrade has specialized in the sale of machinery and complete technological solutions for the recycling industry for many years. We are an official representative of 3E Machinery in Poland. We offer new and used shredders, granulators, and complete recycling systems. We offer a new industrial two-shaft shredder, 3E Machinery GL32120, equipped with two independent drives, each with a power of 30 kW. The machine operates at low speed and high torque, making it suitable for demanding industrial applications and the shredding of a wide range of materials. TECHNICAL SPECIFICATIONS: Model: GL32120 Type: Two-shaft shredder Motor power: 30 kW + 30 kW Rotor length: 1,200 mm Rotor diameter: 430 mm Number of knives: 30 pcs. Knife thickness: 40 mm Shredding chamber dimensions: 1,212 × 736 mm Machine dimensions (L × W × H): 3,650 × 1,346 × 2,275 mm Weight: approx. 5,200 kg Control system: Electrical control cabinet with Siemens PLC Condition: Brand new APPLICATIONS: The GL32120 two-shaft shredder can be used for shredding various materials, including: plastics, industrial waste, wood and pallets, electronic waste, barrels and containers, municipal waste, paper and cardboard, metal-containing waste, used tires, and many other materials intended for recycling. The robust design and low-speed, high-torque shredding system make the GL32120 an excellent solution for heavy-duty recycling applications. The modular construction of the shredding chamber provides easy access to the main components for maintenance and servicing. Machine available in our inventory. We provide professional technical advice, commissioning, after-sales service, and full access to spare and wear parts. Complete range of our shredders, granulators, and recycling lines: GrabTrade – shredding and recycling machines.

Condition: new, Year of construction: 2025, functionality: fully functional, The CNC BAYKAL Hybrid Press Brakes combines all the benefits of both hydraulic and all-electric press brake systems into one. If you’re looking for press brakes that are fast, accurate, and energy-efficient, BAYKAL is the way to go. The CNC BAYKAL Hybrid Press Brakes can significantly save energy, save fuel, improve bending efficiency, reduce the risk of oil leakage, reduce installation costs, extend the service life of consumables, improve bending accuracy, reduce noise, and improve the working environment. The CNC BAYKAL hybrid press brakes system are designed with an individual electro-hydraulic servo drive system and servo pumps to control the for each of the left and right cylinders. The servo motor controls the output flow of the oil pump according to the program setting, and then controls the movement speed and position positioning of the slider, and there is no throttling phenomenon in the whole process. Therefore, all the energy output by the oil pump is supplied to the left-right oil cylinder. This control method does not have any energy loss, and the energy-saving effect is very prominent. With this system the hydraulics run on demand when the foot pedal is activated, rather than having a pump running continuously. This results in lower energy usage than a standard hydraulic machine as well as faster cycle times and extremely high accuracy. The flow and pressure of Y1 and Y2 oil cylinders are respectively controlled by two sets of servo bidirectional pump systems, and the oil in the upper chamber of the oil cylinder is directly pumped into the lower chamber of the oil cylinder through the oil pump to realize the lifting of the beam. The reverse rotation of the oil pump pumps the oil in the lower chamber of the oil cylinder directly into the lower chamber of the oil cylinder to realize the pressing and bending of the upper die. Dwsdpfxorq D Nij Akvoa Applicable between from 100 Tons to 1250 Tons, the synchronization of the left and right of the upper beam of the CNC BAYKAL hybrid press brakes is controlled separately by two sets of servo bidirectional pumps.

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) Dsdpfx Akjfi Tg Hjvewa No. 2 Vertical supporting columns of the top supporting beam No. 1 Horizontal top supporting beam (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms No. 2 Out-side rollers way (on gound) to in-feed pile of panels to the Loader Out-side motorized rollers table (which receives panels from the Loader) Separate electric and command panel Perimetral safety metal grids Working capacity (cycles/min) 16 (ca.) Min/Max panels thickness mm 10 / 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1300 x 3000 (ca.) Total installed motor power Kw 30

Condition: new, Year of construction: 2026, table length 3000 mm table width 1500 mm burner heads 1 Control CNC workpiece weight 900 kg traversing speed 91 m/min dimensions of the machine ca. 5562 x 2270 x 2388 mm Laser cutting machine with manual shuttle table Configuration Dwedpowh Ulqofx Akvsa 1. BodorPower laser source 6 kW 2. Bodor Genius laser cutting head with autofocus 3. Bodor Thinker 3.0 control system 4. Bed made of tenon and mortise structure 5. Bodor servo motor and driver 6. Nitrogen control valve 7. Bodor Lightning perforation technology 8. Automatic layout of residual material 9. 21.5-inch monitor with touch function 10. Automatic adjustment of cutting gas pressure 11. Active anti-collision function 12. Intelligent vibration protection 13. Anti-burn mineral casting 14. Bodor Mango® Ergonomic Remote Control 15. Gas-saving nozzles with stable flow 16. Intelligent maintenance reminder 17. WIFI internet connection 18. Water cooling 19. Extraction system 20. Wear parts set CUTTING CAPACITY: STRUCTURAL STEEL 20 mm STAINLESS STEEL 18 mm ALUMINUM 14 mm OPTIONAL: LANTEK EXPERT II CUT software incl. post-processor

Condition: new, Year of construction: 2026, total length: 1,450 mm, total width: 800 mm, total height: 1,800 mm, overall weight: 500 kg, power: 4.75 kW (6.46 HP), FC 120 ZK Working capacity Ø 120x120 mm, No. of belt stations (Z) 1, No. of brush stations (K) 1, Sanding belt, dimensions 120x1850 mm, Brush belt dimensions 120xØ200 mm, Sanding belt speed 20 m/s, Brush belt speed 15 m/s, Feed speed 12 m/s, Sanding belt motor per head (x1) 3 kW, Brush motor per head (x1) 1.5 kW, feed motor 0.25 kW, Total power 4.75 kW, Power consumption 12A, Rod suction connection per head Ø (2x) 80 mm, Dimensions 1450x800x1800 mm, Weight 500 kg Dwodpfxot D D Nzo Akvsa

Condition: used, Year of construction: 1997, The bending press was manufactured in 1997 in England by EDWARDS PEARSON. The folding press is in good condition, sold with tools. Always serviced and maintained on time. The machine tools are connected and can be tested and inspected. Specification: Model: EDWARDS PEARSON 100/3100 PR6 Year: 1997 Working length: 3 100 mm Bending capacity: 100 T Travel: 172 mm Distance between table and frame: 450 mm Working speed: 100 mm/s Return speed: 110 mm/s Axes: auto X1, X2, Y1, Y2, Z1 , Z2 , R Tools: Available Weight: 7 T Other: New screen recently replaced, keyboard attached for ease of use. If you have more questions, we will be happy to answer. Dwjdpfxsrfx Ute Akvja

Year of construction: 1992, condition: good (used), machine/vehicle number: 20281, Offer 23034 Technical specifications: - Max. grinding length approx. 350 mm - Max. grinding width 150 mm - Max. installation height with/without magnet 150 / 210 mm - Grinding wheel stroke approx. 200 mm Djdpfx Akjklxwkjvewa - Clamping surface 300 x 160 mm - Magnetic clamping plate 250 x 150 mm - Grinding wheel dimensions approx. 200 x 80 x 78 mm - Grinding wheel speed 2800 rpm - Swivel range of the grinding arm approx. 180° - Manual swivel arm clamping via clamping lever - Wet grinding system - Drive 400 V / 1.85 kW - Space requirement approx. W 850 x H 1650 x D 800 mm - Weight approx. 350 kg

Condition: like new (used), Year of construction: 2024, Permanent overbelt magnet separator TYPE DMPM800 1,400 x 900 x 220mm ===== Solid steel construction, welded Dodpfx Akohun Uiovswa Construction welded & painted RAL 7016 (anthracite gray) Magnet dimensions: 800x500x180mm Drive roller + deflection roller S235 steel welded and machined Ø220x700mm crowned, shaft fixed with clamping bearings. Drive: GEMOTEG 1.1KW slip-on gear motor, speed 0.4-0.6m/sec Connection 400V, 50Hz, protection class IP54 Drive ready for connection to motor terminal box (commissioning must be carried out by a qualified electrician) PU conveyor belt DM 20/2 0+010 PU black matt 5.4mm thick Conveyor belt width: 650mm 7 TG-40 studs high frequency welded Belt material: 3-layer, particularly transversely stable * equipped with rust-proof alligator connectors RS125 Magnet properties: Built-in magnetic core: Strontium Ferrite Y30 Bound SfRe strontium hard ferrite magnetic core encased in soft iron so that very high permeability can be guaranteed. Housing with 1.4301 stainless steel plate and pole shoes tightly closed and sealed. Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator Our core competence lies in supplying the customer with exactly what he really needs. Together with our customers, we work out customer-specific, individual solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application.