Rebar Bender

Muhr und Bender / Mubea BB 032 P200

Condition: new, Year of construction: 2025, MG20B is suitable for bending your steel into the desired shape. Product information: Gjdom Sgx Djpfx Af Usbi - Voltage: 380 V (optional with 220 V available) - Motor Power: 1,5 kW - Dimensions Machine: 60cm x 45cm x 32cm - Dimensions Machine frame: 57cm x 44cm x 60cm - Ideal for your construction company or also for your construction sites - Easy to carry - In addition to the individual bending process, a bending sequence can also be programmed - Stirrup head for different reinforcing steel Ø are included in the accessories (incl. accessories, see pictures) - Possible in automatic or manual mode - Bending capacities depending on steel strength according to table (see pictures) - Optional available with digital control panel - Net weight: 95 kg Shipping: Europe-wide (self-collection also possible) If you have any questions, please do not hesitate to contact us!

Condition: used, Year of construction: 2007, container length: 40 ft, color: light grey, overall weight: 30,480 kg, empty load weight: 3,745 kg, loading space volume: 67.7 m³, loading space width: 2,352 mm, loading space length: 12,032 mm, loading space height: 2,390 mm, Dear Sir or Madam Thank you for your interest in containers from MT CONTAINER GmbH in Hamburg. Sea containers are wind and watertight large-capacity containers for the transportation of goods by sea, land or air freight. The ISO-standardized containers can be loaded, unloaded and stacked particularly quickly and easily. High Cube containers are the same size as a standard container. They are just as wide as they are long, but they are constructed higher. This gives them a higher volume for more payload. In contrast to standard containers with a height of 2591 mm, high cube containers have a height of 2896 mm. _____ This container is a: 40 foot HC container _____ Our containers have the following features: Gbedeh Hm U Hjpfx Af Uoi ✅ tested ✅ Valid CSC sticker (TÜV for the box) ✅ Painted in light grey (desired color possible) ✅ Wind and waterproof ✅ Odorless _____ Our containers have the following dimensions: External dimensions ■ L 12192 mm x W 2438 mm x H 2896 mm Internal dimensions ■ L 12032 mm x W 2352 mm x H 2698 mm Door dimensions ■ L 2340 mm x W 2585 mm Volume ■ 76.4 m³ Euro pallets ■ 25 Further information: Unladen weight ■ 3880 kg Payload ■ 28620 kg Total weight ■ 32500 kg Transport goods: Dry cargo transport _____ ⭐ Extra service ■ Expert advice free of charge ■ Transport and delivery with or without unloading the container can be organized for an additional charge ■ Steel frame, stainless steel walls & aluminum floor ■ Can be painted in desired color / RAL tone ■ Lighting installation and electronic equipment possible ■ Drive-on ramp on request ■ Container supports possible ■ Accessible with pallet truck and forklift _____ ■ Prices are net without VAT. ■ Sales stocks change daily, please ask for a quote ■ The photos shown serve as sample images _____ Do you have any questions or concerns regarding containers or would you like a non-binding offer? Then give us a call or send us your inquiry. We also look forward to your visit to our beautiful container depot in the Port of Hamburg. _____ *Important note: The imprint, the information and the link to the platform of the EU Commission for online dispute resolution, the general terms and conditions with customer information and data protection information as well as the revocation instructions and the sample revocation form can be accessed by clicking on "Legal information". This advertisement serves exclusively as a basis for subsequent contract negotiations. It constitutes neither a binding offer nor an invitation to submit such an offer. If the product has aroused your interest, please send us a non-binding message by [email], [telephone], [fax], [letter] to the contact details given under "Legal information" or [via the "Send message" function], stating your [email address], [fax number] or [postal address]. We will then submit a binding offer to you and send you our General Terms and Conditions with customer information as well as a copy of the contract.

Condition: good (used), functionality: fully functional, We offer for sale a complete line for multi-point automatic welding of SCHLATTER brand steel wires. Gbodpetvpilofx Af Uoi We have three fully operational production lines. There are also automatic machines for the production of transverse wires (so called slitting machines with a cutter). We also have a number of single point welding machines for steel wires.

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW Gsdpfshzbipjx Af Uobi - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: used, Year of construction: 1986, functionality: fully functional, machine/vehicle number: C3300, grinding length: 4,500 mm, grinding width: 300 mm, table length: 4,500 mm, table width: 300 mm, space requirement height: 2,500 mm, space requirement length: 13,700 mm, space requirement width: 2,500 mm, Reform AR45 T9 ZU C3300/86 Gbodpfetqtn Dox Af Uji Year of manufacture: 1986 Sanding length: 4500mm Sanding width: 300mm Workpiece height: 250mm Swivel range table or sanding arm: +-90 degrees Segment head diameter: 560mm Spindle diameter in front bearing: 120mm Swivel range: 2° Max. Torque: 719,5Nm Motor: B280, 55kW Grinding spindle speed range: 0-730 rpm Control system: BBC Baumüller drives Marposs measuring system Hydraul. Clamping Sanding mist extraction system: Hydrocyclone cleaning system Additional sanding unit ZU Feed rate: 2000-35000mm/min Space requirement approx. 13.7x2.5x2.5m

Condition: as good as new (ex-display), Year of construction: 2025, Pressing area: 3000 mm x 1500 mm Operating vacuum: -0.85 bar Vacuum pump flow rate: 40 m³/h Pump power: 1.5 kW Noise level: 70 Db Heating temperature: max. 200 °C Heating power: 16 kW Gbedpfx Afou Egp Ij Uji Machine length: 3100 mm Machine width: 1650 mm Machine height: 1750 mm Weight: 950 kg

Condition: used, Year of construction: 1980, TUBE BENDING MACHINE LANG TYPE EL90 Φ 90 Gbodpforq D N Rjx Af Usi

Condition: new, Year of construction: 2025, functionality: fully functional, Hydraulic log ladder, for log diameters from 7 cm to 66 cm. Gbodpfxov N Eiqj Af Uoi

Condition: good (used), Automatic drawer warehouse is the ideal system for the vertical storage of steel bars and profiles with lengths of 3 m, 6 m and 12 m, heavy accessories, semi-finished products, components, molds and long material in general. The capacity per load unit ranges from a minimum of 5000 kg to a maximum of 6000 kg. Gbedpfx Afjvvlntj Uji

Condition: new, Year of construction: 2026, functionality: fully functional, We offer a storage tank for 5000 litre heating oil or diesel. Gedpfx Aoi Ar D Sof Ujbi