Used Zmm Lathes Prices for sale (49)

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, turning diameter over cross slide: 690 mm, spindle bore: 155 mm, turning diameter: 1,090 mm, center height: 500 mm, center width: 700 mm, turning length: 3,000 mm, Parallel Lathe ZMM-SIBIMEX CU 1000/3000 Year of manufacture: 2007 CE certified Excellent overall condition Centre height: 500 mm Maximum turning length: 3000 mm Swing over bed: 1090 mm Swing over carriage: 690 mm Swing in gap: 1250 mm Spindle bore: 155 mm Hfsdpeylazwsfx Ahvsd Bed width: 700 mm Motor power: 22 kW Approx. weight: 8000 kg Number of speeds: 24 Spindle speed range: 6.3 - 1250 rpm Speed range Machine complete with fixed and travelling steady rests Self-centering chuck 4-jaw faceplate Powered tailstock Elbo axis DRO Rapid traverse on feeds

Condition: new, Year of construction: 2022, Metal lathe 400V, fabr. ZMM - type C400TM/1000 The construction and design of this machine meet today's requirements for efficiency and ergonomics. The production technology, the adaptation of high-quality materials and standardized components from reputable and globally proven manufacturers, as well as continuous inspection, meet even the most demanding customer requirements. The machine is characterized by high technological, functional and operational performance, reliability and safety. Naturally, this machine complies with current European safety standards. Hsdpoiy Nq Hjfx Ahvjfd Features of this lathe General: European top quality lathe The machine is equipped with automatic power supply Equipped with digital readout X-Y axis Bed: Heavy, strongly ribbed and rigid bed casting made of strong gray cast iron that prevents vibrations when the machine is properly leveled and operated. Double prismatic, inductively hardened and precision ground guideways Built-in gap bridge that can be removed for handling large workpieces. Headstock: The stable, well-ribbed and precision-machined headstock ensures non-vibrating and accurate operation while the lathe is processing parts at high speed or during heavy machining regime. The ground gears are made of induction-hardened hardened steel and operate in an oil bath. The spindle is hardened, precision ground and balanced; it has a standard version of the hole and spindle face, including Cam lock performance, direct mounting of 3-jaw self-centering, 4-jaw independent chucks, chucks without chucks or mounting of the chucks with flange connector. The spindle bearings can use bearings from SKF, FAG, NSK with preload for mounting the bearing set. This bearing ensures high accuracy of machine work indefinitely. Lathe apron: Mechanized transverse and longitudinal movements. A built-in safety mechanism against overloading. A latch against simultaneous switching of the nut to spindle and automatic feed. Fast movements in both axes. Feed gearbox: When processing a particular part, the feed gearbox offers different feeds and steps for thread cutting - metric, inch, module and DP threads. It is designed so that operation is extremely convenient. Specifications Learn More Product Type-Turner Brand-ZMM Voltage-400V Center height-200 mm Turning diameter over bed-400 mm Turning diameter over support-235 mm Turning diameter over pocket-550 mm Bed width-320 mm Main spindle clearance-52 mm Distance between centers-750 - 1000 - 1500 Main spindle internal/external thread DIN 55027 - gr.6 Spindle speeds-50 - 2240 Motor power- [kW]4 kW Number of feeds-80 Feed range longitudinal-0.015 - 0.6 mm/rev Feed range cross-0,0075 - 0,3 mm/rev Number of thread cuts-40 Thread cutting metric-0,25 - 7,5 mm Whitworth thread-cutting-120 - 4 TPI Thread-cutting module-0,0625 - 1,875 module Thread cutting pitch-480 - 16 dP Transverse displacement support-235 mm Chisel displacement support-110 mm Pinole diameter-100 mm Loose head-MK 4 Weight-1700 kg Price is ex VAT!

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, turning diameter over cross slide: 430 mm, spindle bore: 103 mm, turning diameter: 630 mm, center height: 315 mm, turning length: 2,000 mm, spindle speed (max.): 1,250 rpm, spindle speed (min.): 11 rpm, overall weight: 3,300 kg, Parallel Lathe ZMM-SIBIMEX CU 630/2000 Year of manufacture: 2007 CE certification Excellent overall condition Centre height: 315 mm Max turning length: 2000 mm Swing over bed: 630 mm Swing over cross slide: 430 mm Swing in gap: 830 mm Spindle bore: 103 mm Bed width: 400 mm Motor power: 11 kW Hjdoytpqqspfx Ahvsfd Weight approx.: 3300 kg Number of speeds: 11 Spindle speed: 11.5 - 1250 rpm Machine complete with steadies Self-centering chuck Live tailstock Elbo axis readout Rapid feeds Machine complies with safety regulations

Condition: new, turning diameter 760 mm turning length 3000 mm swing diameter over bed slide 520 mm centre height 380 mm reus 17 (7,5 - 1015) U/min tail stock MK6 quill stroke 225 mm diameter of quill 105 mm spindle bore 132 mm feed längs 0,039 - mm/min feed quer 0,02 - 9 mm/min total power requirement 15 kW weight of the machine ca. 4700 kg dimensions of the machine ca. 4900 x 1650 x 1650 mm - Coolant device - Machine light - Chip back wall - Spindle protection - Lathe chuck protection - Tool holder protection - Interchangeable gears *Special equipment - 3-jaw chuck Ø 250 mm type 3204/ DIN6350, BISON Hfsdpfxeqv Iw To Ahvod - MULTIFIX quick-change holder type B, including 4 tool holders - 3-axis digital display DRO Newall - Foot pedal with brake function CE

Condition: new, neu Bulgarien 55100 € 1041.39 € 600 mm 2000 mm 0 mm 80 mm 400 mm 400 mm 8 90 M 3 20 - 100; 80 - 400; 400 - U/Min 120 64 0.5 - 120 mm 60 - 1/4 Gänge/" 315 mm 1 mm 90 mm 5 MK 2 mm 11 kW 3600 mm 1500 mm 1650 mm 3110 kg In contrast to the universal lathes, here the adjustment of the revolutions is infinitely variable by means of a frequency inverter. It is possible to ensure a "constant cutting speed" (V-const), i.e. when changing the diameter to be machined, the speed remains unchanged and thus a higher accuracy and smoothness of the surface is achieved. At the customer's request, the machines can be manufactured with a reading of the linear displacement and positioning by mounting a digital display. driven by variable speed control (3 steps) 3-axes digital readout Fagor with CSS (constant surface speed) quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 250 mm spindle dead center main motor with frequency invertor four way rapid traverse device longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock Hodpoyq Stpsfx Ahvsfd low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.000 mm € 52 250,00 turning length1.500 mm € 53 290,00 turning length3.000 mm € 59 990,00 turning length4.000 mm € 65 540,00 turning length5.000 mm € 80 860,00

Condition: new, neu Bulgarien 40850 € 780.24 € 400 mm 750 mm 200 mm 52 mm 235 mm 320 mm 6 6 M 4 18-98; 48-265; 144-790; 3 U/Min 80 0.015 - 0.6 mm/U 0.0075 - 0.3 mm/U 40 0.25 - 7.5 mm 120 - 4 Gänge/" 0.0625 - 1.875 235 mm 110 mm 50 mm 4 MK 100 mm 7.5 kW 1530 kg driven by variable speed control (4 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 200 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: Hodpfxeyq Stij Ahvefd turning length 1.000 mm € 41.580,-

Condition: new, neu Bulgarien Hfjdpfx Aeyq Stcshved 133520 € 2523.53 € 1320 mm 3000 mm 625 mm 155 mm 940 mm 700 mm 15 160 M 4 3,7 - 15,6; 14,7 - 62; 58 U/Min 160 0.032 - 38.9 mm/U 0.016 - 19.45 mm/U 0.5 - 480 mm 1/16 - 60 Gänge/" 685 mm 270 mm 125 mm 6 MK 260 mm 30 kW 8550 kg driven by variable speed control (4 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.500 mm € 118 670,00 turning length4.000 mm € 141 700,00 turning lenght 5.000 mm € 153 040,00 turning length6.000 mm € 169 840,00

Condition: new, neu Bulgarien 127060 € 2401.43 € 1090 mm 3000 mm 500 mm 155 mm 690 mm 700 mm 15 160 M 4 3,7 - 15,6; 14,7 - 62; 58 U/Min 160 0.032 - 38.9 mm/U 0.016 - 19.45 mm/U 0.5 - 480 mm 60 - 1/16 Gänge/" 240 525 mm 270 mm 125 mm 6 MK 260 mm 30 kW 8050 kg driven by variable speed control (4 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.500 mm € 112 010,00 turning length4.000 mm € 135 240,00 turning length5.000 mm € 146 580,00 Hjdpfx Asyq Sr Sohvefd turning length6.000 mm € 163 380,00

Condition: new, neu ca. 4 Monate ab Auftragse Bulgarien 50390 € 952.37 € 500 mm 1500 mm 250 mm 75 mm 0 mm 400 mm 8 80 M 3 25-100; 100-400; 500-2000 U/Min 120 0.04 - 12 mm/U 0.02 - 6 mm/U 0.5 - 120 mm 60-1/4 Gänge/" 240-1 315 mm 1 mm 90 mm 5 MK 2 mm 11 kW 3100 mm 1250 mm 1400 mm 2800 kg driven by variable speed control (3 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 250 mm spindle dead center longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: Hfodpfjyq Srfox Ahvod turning length 1.000 mm € 49 250,00 turning length2.000 mm € 52 100,00 turning length3.000 mm € 57 090,00 turning length4.000 mm € 62 740,00 turning length5.000 mm € 78 160,00

Condition: new, neu Bulgarien 460 € 2276.69 € 890 mm 3000 mm 400 mm 155 mm 490 mm 700 mm 15 160 M 4 Hedpfxeyq Sq Uo Ahvjfd 3,7 - 15,6; 14,7 - 62; 58 U/Min 160 0.032 - 38.9 mm/U 0.016 - 19.45 mm/U 0.5 - 480 mm 60 - 1/16 Gänge/" 525 mm 270 mm 125 mm 6 MK 260 mm 30 kW 7500 kg driven by variable speed control (4 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.500 mm € 105 510,00 turning length2.000 mm € 109 230,00 turning length4.000 mm € 128 740,00 turning length5.000 mm € 139 980,00 turning length6.000 mm € 156 880,00

Condition: new, neu Bulgarien 85520 € 1616.33 € 760 mm 3000 mm 380 mm 132 mm 520 mm 560 mm 11 140 M 3 7 - 42; 28 - 170; 165 - 1 U/Min 150 0.039 - mm/U 0.02 - 9 mm/U 0.5 - 0 mm 60 - 1/6 Gänge/" 410 mm 150 mm 105 mm 6 MK 225 mm 15 kW 4470 kg driven by variable speed control (3 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison3295/DIN6350, Ø 400 mm spindle dead center main motor with frequency invertor four way rapid traverse device foot pedal brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock tailstock quill reducer mechanized movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length 1.500 mm € 71 280,00 turning length2.000 mm € 74 190,00 Hodpfx Aheyq Sn Tovefd turning length4.000 mm € 91 680,00 turning length5.000 mm € 104 390,00 turning length6.000 mm € 1 230,00

Condition: new, neu Bulgarien 24940 € 478.85 € 325 mm 750 mm 165 mm 32 mm 190 mm 200 mm 5 4,5 M 2 85-405; 470-2200 U/Min 48 0.006 - 1.77 mm/U 0.003 - 0.885 mm/U 0.1 - 28 mm 0.1 - 1.75 70 - 4 150 mm 95 mm 40 mm 3 MK 100 mm 2.2 kW 2150 mm 950 mm 1350 mm 770 kg driven by variable speed control (2 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 160 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.000 mm Hfjdjyq Sngspfx Ahvjd € 25.360,-

Condition: new, neu Bulgarien 60660 € 1146.47 € 6 mm 2000 mm 315 mm 103 mm 4 mm 400 mm 11 120 M 3 16 - 63; 63 - 250; 315 - U/Min 120 0.04 - 12 mm/U 0.02 - 6 mm/U 0.5 - 120 mm Gänge/" 315 mm 1 mm 90 mm 5 MK 2 mm 11 kW 3310 kg driven by variable speed control (2 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 315 mm spindle dead center longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck Hfsdsyq Sm Nspfx Ahvod toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length 1.000 mm € 57 710,00 turning length1.500 mm € 58 850,00 turning length3.000 mm € 65 550,00 turning length4.000 mm € 71 0,00 turning length5.000 mm € 86 620,00

Condition: new, neu Bulgarien 91920 € 1737.29 € 860 mm 3000 mm 430 mm 135 mm 620 mm 560 mm 11 140 M 7 - 42; 28 - 170; 165 - 1 U/Min 150 0.039 - mm/U 0.02 - 9 mm/U 0.5 - 0 mm 60 - 1/6 Gänge/" 240 435 mm 150 mm 105 mm 6 MK 225 mm 15 kW 4650 kg driven by variable speed control (3 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison3295/DIN6350, Ø 400 mm spindle dead center main motor with frequency invertor four way rapid traverse device foot pedal brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock tailstock quill reducer mechanized movement of tailstock low voltage machine lamp operating manual Hedpfxeyq Sm Ao Ahvofd machine according to "CE" FURTHER TURNING LENGTHS: turning length1.500 mm € 77 680,00 turning length2.000 mm € 80 590,00 turning length4.000 mm € 98 080,00 turning length5.000 mm € 110 890,00 turning length6.000 mm € 124 730,00

Condition: good (used), Year of construction: 2008, Fagor digital display Centre height over bed: 290 mm Swing diameter over bed: 580 mm Distance between centres: 1000 mm Hfedpfx Aheyn Sqpovjd Spindle speed: 20 - 2000 min⁻¹ Tailstock Multifix system

Condition: new, neu ca. 4 Monate ab Auftragse Bulgarien 75740 € 1431.49 € 600 mm 1500 mm 300 mm 80 mm 400 mm 400 mm 8 90 M 3 20 - 100, 80 - 400, 400 - U/Min max. 8 m/min max. 8 m/min 290 mm 90 mm 5 MK 225 mm 11 kW 3,5 / 22 kW/Nm 1,75 / 11 kW/Nm 120 Nm 1250 daN 1050 daN Fast and simple communication between the operator and the lathe. Simple workpieces are machined in the same way as on the universal lathe, but more efficient. Complicated workpieces are machined in the same way as on the universal lathe, but faster. Complicated workpieces are machined in the same way as on the CNC lathe, but easier. Based on the controller Schneider Magelis the intelligent, self-developed ZMM Sliven software leads the operator also without programming skills simple and fast to the finished workpiece. The interface is simple and with large icons, which is convenient in a specific work environment. The intuitive menu facilitates the transition to next screens and operations. Well visualized and structured cyclic operations,threads and steps. Possibility to set up the feeds, threads, etc. both mechanically and digitally (via the display). The manual, automatic and combined mode allows more precise operation compared to universal lathe. Easy transition from manual to automatic operation mode. ACCESSORIES: Siemens motor with Siemens Inverter (3 gear steps) CNC control Schneider Magelis Quick change tool post Amestra Multifix Typ C inkl. 4 Halter (3x Rechteck, 1 Rund) 3-jaw chuck Bison 3204/DIN6350, Ø 250 mm, max. 2500 r/min Spindle dead center Hsdowirn Sspfx Ahvjfd Ball screw spindles for longitudinal and cross axes Coolant equipment Full length rear splash guard Spindle protection Splash guard for the chuck Levelling bols and shims Quick release tailstock Machine lamp Operating manual Machine according to "CE“ FURTHER TURNING LENGTHS: 1000 mm € 74 340,00 mm € 77 240,00 mm € 80 240,00 mm € 83 340,00 mm € 86 340,00

Condition: used, Year of construction: 2023, gebraucht 2023 1675 prompt, Zwischenverkauf v Bulgarien 17600 € 1 325 mm 1000 mm 165 mm 32 mm 190 mm 200 mm 5 4,5 M 12 85 - 2.000 1/min 48 0.006 - 1.77 mm/U 0.003 - 0.885 mm/U 0.1 - 28 mm 75 - 2,5 Gänge/" 0.1 - 1.75 150 mm 95 mm 40 mm 3 MK 100 mm 2.2 kW 2150 mm 950 mm 1350 mm 770 kg demo machine / mint condition net price (price for new machine € 21.690,00) driven by manual transmission 3-axes digital readout Fagor 40i quick change toolpostAmestra with 4 holders (3 square, 1 round) Hfjdpfxjwirwyo Ahved 3-jaw chuck Bison 3204/DIN6350, Ø 160 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" incl. following optional equipment: 1 lenght stop FURTHER TURNING LENGTHS ON REQUEST

Condition: new, Year of construction: 2025, functionality: fully functional, turning diameter over cross slide: 420 mm, spindle bore: 103 mm, turning diameter: 660 mm, turning length: 3,000 mm, spindle speed (max.): 1,320 rpm, spindle speed (min.): 9 rpm, spindle motor power: 15,000 W, Equipment: rotational speed infinitely variable, Machine: MEXPOL TUB 660 x 3000 mm Hedpfx Aoyr Dmkjhvofd with infinitely variable spindle speeds via frequency converter Bed width: 560 mm Distance between centers: 3000 mm Center height: 330 mm Spindle bore: 103 mm Workpiece weight: up to 3000 kg Spindle mount: DIN 55027/11 Spindle speed range: 9 – 1320 rpm Main drive: 15 kW Feed: Longitudinal feed: 0.039–18 mm/rev, Cross feed: 0.02–9 mm/rev Rapid traverse: Longitudinal: 3800 mm/min, Cross: 1900 mm/min Tailstock: Quill diameter: 105 mm, Stroke: 225 mm, MT6 Thread cutting: metric, inch, module, DP Standard accessories: Frequency converter Quick-change tool post, size C Coolant system Interlocked chuck guard Lighting Set of change gears CE conformity Dimensions: 4970 × 1650 × 1500 mm Weight: 4750 kg Fixed steady rest (roller jaws) Ø 20–200 mm Fixed steady rest (roller jaws) Ø 180–430 mm Delivery: Immediately available from stock (while stocks last)

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, turning diameter over cross slide: 490 mm, spindle bore: 155 mm, center height: 400 mm, turning length: 3,000 mm, spindle speed (max.): 1,250 rpm, spindle speed (min.): 6 rpm, bed width: 700 mm, Turning diameter in gap: 1,050 mm, rotational speed (max.): 1,250 rpm, overall weight: 7,500 kg, three-jaw chuck diameter: 630 mm, ZMM Lathe CU800x3000, 2011, very little used, in excellent condition Specifications: Swing over bed: 890 mm Distance between centers: 3000 mm Spindle bore: 155 mm Bed width: 700 mm Spindle speed: 6.3–1250 rpm Weight: approx. 7500 kg Compliant with ARBO/CE Machine equipped with: • 2-axis digital readout • BISON 3-jaw chuck 630 mm • BISON 4-jaw independent chuck 800 mm • 2 x fixed steady rests with roller fingers • 1 x travelling steady rest • Electrically adjustable tailstock • Tool post with 4 holders • Coolant system Hfsdpfx Aexyf Ecshvod • Machine lighting

Condition: new, neu ca. 4 Monate ab Auftragse Bulgarien 36070 € 688.94 € 400 mm 1000 mm 200 mm 52 mm 235 mm 320 mm 6 6 M 12 50-2.240 1/min 80 0.015 - 0.6 mm/U 0.0075 - 0.3 mm/U 40 0.25 - 7.5 mm 120 - 4 Gänge/" 0.0625 - 1.875 480 - 16 235 mm 110 mm 50 mm 4 MK 100 mm 4 kW 2750 mm 1100 mm 1600 mm 1540 kg driven by manual transmission 3-axes digital readout Fagor 40i quick change toolpostMultisuissewith4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 200 mm spindle noseNr. 6 DIN 55027 four way rapid traverse device spindle dead center coolant equipment 1 pce. flange plate for lathe chuckØ 200 mm 1 adapter sleeve full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTH (PRICE ON REQUEST): Hfedpfx Ajxzuu Aehvjd turning length 750 mm

Condition: new, Year of construction: 2025, neu 2025 010105 prompt, Zwischenverkauf v Bulgarien 47390 € 905.15 € 1 600 mm 2000 mm 0 mm 80 mm 400 mm 400 mm 8 90 M 21 20 - 2000 1/min 120 0.04 - 12 mm/U 0.02 - 6 mm/U 64 0.5 - 120 mm 60 - 1/4 Gänge/" 315 mm 1 mm 90 mm 5 MK 2 mm 7.5 kW 3600 mm 1250 mm 1400 mm 3110 kg driven by conventional gearbox 3-axes digital readout Fagor 40i quick change toolpostAmestra Multisuisse type C with 4 holders (3 square, 1 round) 3-jaw chuck Bison3204/DIN6350, Ø 250 mm spindle dead center four way rapid traverse device electromagnetic brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual Hsdpfx Aswiqz Dshvefd machine according to "CE" FURTHER TURNING LENGTHS (PRICES ON REQUEST): turning length 1.000 mm turning length 1.500 mm turning length 3.000 mm turning length 4.000 mm turning length 5.000 mm

Condition: good (used), Year of construction: 2011, functionality: fully functional, turning diameter over cross slide: 700 mm, turning length: 6,000 mm, spindle motor power: 30 W, The lathe is in good technical condition, connected and ready for testing. It features digital readout, faceplate, and steadies. Specifications: Swing diameter over bed: 1,090 mm Distance between centers: 6,000 mm Swing diameter over cross slide: 700 mm Hjdpfsx A S Sbex Ahvsfd Main drive motor power: 30 kW Dimensions (L x W x H): 8,200 x 1,800 x 1,855 mm Machine weight: 11,000 kg

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 380 mm, turning length: 5,000 mm, turning diameter: 590 mm, spindle bore: 72 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 25 rpm, spindle motor power: 11 W, rapid traverse X-axis: 8 m/min, CNC lathe TUS 580 C New CNC-controlled machine with flat bed and Siemens Sinumerik 828D BASIC ShopTurn . Delivery date: approx. 4 months after technical and commercial agreement. Center height [mm]: 290 Swing diameter over bed [mm]: 590 Swing diameter over bed slide [mm]: 380 Center width [mm]: 1000/1500/2000/3000/4000/5000 Max. Machining length [mm]: 1250/1750/2750/3750/4750/5750 Spindle bore [mm]: 72 Spindle mount [DIN]: 55027/8 Taper in the main spindle [MK]: 8 Max. Workpiece weight: - Clamping between centers [kg]: 400 - In chuck and live center in tailstock [kg]: 600 - In chuck and steady rest [kg]: 800 - In chuck, steady rest and live center [kg]: 1300 - Flying (Lmax = 250 mm) [kg]: 150 Bed width [mm]: 400 Turning tool cross-section (HxW) [mm]: 32 x 32 Multifix system steel holder [size]: C Speeds: Total speed range [rpm]: 25 to 2000 Number of stages: 3 Gear stage I [rpm]: 25 - 100 Gear stage II [rpm]: 100 - 400 Gear stage III [rpm]: 500 - 2000 Max. Torque (spindle) [Nm]: 1200 - Gear stage I [Nm]: 1200 - Gear stage II [Nm]: 300 - Gear stage III [Nm]: 60 Travel range: Longitudinal adjustment - X axis [mm]: 290 Longitudinal adjustment - Z axis [mm]: 1000/1500/2000/3000/4000/5000 Feed range: Feed range in X/Z-axis [mm/min]: 1 - 3000 Rapid traverse speed X-axis [mm/min]: 8000 Rapid traverse speed Z-axis [mm/min]: 8000 Torque of the axis drives: X-axis [Nm]: 11 Z-axis [Nm]: 16 Feed influence [%]: 0 - 120 Tailstock: Quill diameter [mm]: 90 Quill stroke [mm]: 230 Quill taper [MK]: 5 Drives: Main motor power [kW]: 11 Cooling pump motor output [kW]: 0.09 Total output [kVA]: 15 Space requirement/weight: Length of the machine with 1000 mm center distance [mm]: 3150 Length of the machine with 1500 mm center distance [mm]: 3650 Length of the machine with 2000 mm center distance [mm]: 4150 Length of the machine with 3000 mm center distance [mm]: 4650 Length of the machine with 4000 mm center distance [mm]: 5250 Length of the machine with 5000 mm center distance [mm]: 5750 Width of the machine, depending on the equipment [mm]: 2000 Height of the machine, depending on the equipment [mm]: 2000 Machine weight at 2000 mm center distance [kg]: 3800 Additional weight for a further 1000 mm center distance [kg]: approx. 500 Standard accessories: - Electrical equipment for three-phase current 400 V / 50Hz according to VDE 0113 - Siemens SINUMERIK 828D BASIC ShopTurn - Frequency controller for main drive - SIEMENS - Illumination lamp - Quick-change steel holder head size C - Coolant system with electric pump - Locked chuck protection hood - Rear chip guard - Chip guard at the front of the top support - Operating instructions, test report - CE and declaration of conformity - Machine color (similar to RAL 7035 RAL 7011) Options: - Fixed setting vice - Three- and four-jaw chuck - Face plate - Chuck flange - Hydraulic tailstock quill - Power chuck - Turret head with turret disk Hedoufgg Djpfx Ahvjfd - Drill stand with boring bar - And much more

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 240 mm, spindle bore: 80 mm, turning diameter: 400 mm, center height: 220 mm, turning length: 1,500 mm, quill stroke: 230 mm, quill diameter: 90 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 25 rpm, swing diameter over cross slide: 240 mm, bed width: 400 mm, Equipment: rotational speed infinitely variable, Production Lathe MEXPOL TUS 400 – Available from Stock The MEXPOL TUS 400 is a high-performance production lathe ideal for precise and efficient machining tasks. With its robust construction, powerful main drive, and comprehensive standard equipment, this machine is perfectly suited for continuous industrial operation. Technical Specifications • Center height: 220 mm • Swing diameter over bed: 400 mm • Swing diameter over cross slide: 240 mm Hsdpfx Aheyhzgqevsfd • Distance between centers: 1,500 mm • Bed width: 400 mm • Spindle bore: 80 mm • Spindle mount: DIN 55027 / 8 • Main drive: 11 kW with frequency inverter • Speed range: 25 – 2,000 rpm (3 gear stages) • Maximum spindle torque: 1,200 Nm • Max. workpiece weight: o Between centers: 150 kg o In chuck with tailstock: 600 kg o With steady rest: up to 1,300 kg • Accuracy according to DIN 8606 • Electrical equipment: 400 V / 50 Hz • Noise level: max. 84 dB(A) Feeds and Thread Cutting • Longitudinal feed: 0.04 – 12 mm/rev • Cross feed: 0.02 – 6 mm/rev • Rapid traverse longitudinal / cross: 3,800 / 1,900 mm/min • Metric, imperial, module, and DP threads without change gears Slides • Cross slide travel: 315 mm • Top slide travel: 130 mm Tailstock • Quill diameter: 90 mm • Quill taper: Morse taper MT 5 • Quill stroke: 230 mm Weight • Machine weight: approx. 2,500 kg Standard Equipment (excerpt) • Frequency-controlled main drive • Multifix quick-change tool post, size C • Central lubrication for carriage, headstock, and feed gearbox • Coolant system • Safety chuck guard with interlock • Travelling chip guard and rear chip wall • CE marking and declaration of conformity • Machine color: RAL 7035 / RAL 7011 Options • FAGOR INNOVA 30iT digital readout

Condition: good (used), Year of construction: 1998, ZMM Sliven - CU 1000 steady rest Hfsdpfx Ahex Ttfajvsd