Used Leather Punch for sale (3,772)

Condition: good (used), Renz Punch 700 Perforator This machine is in very good condition. Electric drive, foot pedal control. Includes a 3:1 perforation tool (4x4mm square) and a hanger cutting module. Side tables are also included. Manufacturer’s description: Perforating machine with a working width of up to 700 mm. Designed for continuous operation and heavy loads. Foot pedal-activated operation. Perforation of up to 40 sheets (4.5 mm) in a single cycle. Quick and easy replacement of perforation strips. Available with or without a hanger cutout. Two-piece strips can be used – one tool allows for perforation of both books without a hanger cutout and calendars with a hanger cutout. The machine operates on a 3-phase, 380V power supply. Weight: 325 kg. Made in Germany. Dusdpfeyrz U Esx Aaaep

Condition: new, Year of construction: 2025, Metal roof snap lock machine SLP-1 auto with side punching option is the latest project of our company in the direction of equipment for metal roofing production. Snap lock machine SLP-1 auto can produce click-seam panels with fixation holes and punch off side parts of the panels, it makes possible to bend the edge of the panel and join it to the roof elements after. Our machine is equipped with an automation system and make production in a fully automatic mode. This process comes following way: operator of machine put end of metal roll to the pulling rollers of the machine, which moves it to the rolling part of the equipment. At the beginning of the rolling process, two pneumatic punching presses from each side of machine make side cuts of panels. After cutting, the rolling process goes to the next rolling rollers. They gradually form the roofing panel profile and cut out fixation holes with special cutting tool rollers. After rolling, special automatic shear at the end of machine cut off the panel into length with necessary sizes. As machine cuts side parts of panels at the beginning of production process, so it cuts only flat part of panel in the end of production. It makes panel quality better and there are no any deformations as with a profile cutting happens, when guillotine shear has to cut not only flat part but also the lock part of panel. Specifications: Dimensions (mm): rolling machine 3000x1400x900 Dsdpfxouzv Tzo Aaasup guillotine shears 400x1120x1130 Weight (kg): rolling machine 643 guillotine shears: 110 Drive power: rolling machine: 1.5 kW, 220V (or 380V on request) guillotine shears: 1.1kW Maximum thickness of sheet metal (mm): 0.6-0.7mm Workpiece Width (mm): 250-700 Rolling speed (m/min): up to 10 Metal roof panel machine SLP-1 auto has an automation system so help to make minimum part of operator works - he just sets necessary number of panels and their length on the computer to produce, and the machine automatically rolls and cuts them. Therefore reducing the influence of the human factor, manufacturing errors are minimum and panels are all the same sizes and ready for further installation. SLP-1 auto click lock roll forming machine has easy width adjustment system, so to change machine from one panel width to another, the operator just needs to turn the adjustment wheel, so the readjustment takes a very short time for such operation. As additional options metal roof panel roll forming machine SLP-1 auto can have: Cutting knife to cut metal from coil at the end of the metal rolling process to reduce the amount of possible waste material; Ribbed panel rolls, to roll narrow or wide ribs in the center of the roofing snap lock panel; Microwave panel module- device to form small bends along the entire width of the roofing panel, making the appearance of the roof more interesting and eye-catching. Metal unwinder (can be floor-standing, manual console, automatic console).

Condition: good (used), Renz Punch 500 Perforator This device is in very good condition. New model with adjustable controls. Electric drive, foot pedal control. The set includes a 3:1 perforation tool, a 4x4mm hole, and a cutout for the hanger. Manufacturer’s description: Perforation device with a working width of up to 500 mm Device designed for continuous operation and heavy loads Foot pedal-operated operation Dusdpfxsynfxao Aaaep Perforation of up to 40 sheets (4 mm) in a single cycle Quick and easy replacement of perforation strips Available with or without a suspension slot Available with QSA slots (quick format change by disabling selected needles without removing the slot) Available with two-piece slots – one tool allows for perforation of both books without a suspension slot and calendars with a suspension slot (in this case, perforation without a suspension slot up to 465 mm) 3-phase powered Weight: 120 kg

Condition: ready for operation (used), functionality: fully functional, Very nice Wire-o punching machine. Electric with foot pedal, max format 710 mm. Punches up to 20 sheets of 80 gsm with square holes. You are of course welcome to test this machine with us. Dodpfxsymn Hwe Aaaeup We can arrange transport/packaging for you and load it onto a truck or into a container. Please request a price including transport (location: Netherlands). Kind regards, Henk Hoos.

Condition: good (used), Renz Punch Super 700 Perforator This machine is in very good condition. Electric drive, foot pedal control. Includes a 3:1 square perforation tool with a cutout for the hanger. Manufacturer’s description: Perforation device with a working width of up to 700 mm Designed for continuous operation and heavy loads Foot pedal-activated operation Perforation of up to 40 sheets (4.5 mm) in a single cycle Quick and easy replacement of perforation strips Dodpeyg Eabefx Aaaoup Available with or without a hanger cutout Two-piece strips can be used – one tool allows for perforation of both books without a hanger cutout and calendars with a hanger cutout. Requires a 3-phase, 380V power supply. Weight: 400 kg

Condition: used, Year of construction: 2000, plate punches Dsdpfx Ajcqxv Tjaaeup 1. Beil 780-S-St - 3-hole 780/425 - table 1000-1400 2. Bacher 2005 - 2-hole 425 - table 730-1000 3. Bacher 2045 - 2-hole 425 - table 730-1000 4. Beil 425-T-H - 2-hole 425 - table 520-770 5. Stanze 2-hole 425 - table 420-660 - metal frame - SOLD 6. Billows 2-hole 225 - table 650-950 7. Bacher 2032 2-hole 225 - table 300-400 (4) - 1x SOLD 8. Heidelberg SM52 - 425 plate punch 9. Heidelberg SM52 - plate bender - SOLD

Condition: ready for operation (used), Year of construction: 2013, General Data Machine weight 6500 kg Main Drive Dsdpfex D Ia Rox Aaaoup Punching force 300 Kn Movement X-Axis Movement 1300 mm This Euromac MTX Flex 6 Hybrid was manufactured in 2013. It features a maximum punching force of 300 kN and can handle sheet weights up to 200 kg. Equipped with a hydraulic system controlled by a servomotor, it ensures precision and efficiency. The machine supports automatic repositioning up to 10000 mm and has a maximum punching diameter of 85 mm. Ideal for high-quality punching capabilities. Contact us for more information about this machine. Application Types Punching

Year of construction: 2020, condition: ready for operation (used), General Data Measurements width 5710 mm Measurements depth 6370 mm Measurements height 2220 mm Machine weight 14000 kg Control Unit Brand BOSCH Model MTX Main Drive Number of axis 6 Turret Number of turrets 1 Djdox D Nupepfx Aaaeup Tools Number of station 12 Media Oil tank 300 liters Additional Equipment Hydraulic Motor Power: 11 kW Axes Drive Type (C1 and C2): Direct drive Hydraulic Punching Force: 30 tons Portable CNC Control Panel Work Chute: Automatic system to take out cut parts Mobile Storage Box for Cut Parts Waste Box Light Barriers This 6-axis Baykal BPM-T 1525X30 was manufactured in 2020, featuring a robust 30-ton hydraulic punching force and a versatile tooling system with 20 stations and indexable tool holders. It supports a working range of 3000 × 1500 mm and rapid axis speeds (X: 100 m/min, Y: 80 m/min). Equipped with Bosch MTX CNC control and Lantek CAM software, it ensures precision and efficiency. If you are looking to get high-quality punching capabilities, consider the Baykal BPM-T 1525X30 machine we have for sale. Contact us for more information. Application Types Punching

Condition: ready for operation (used), Year of construction: 2009, operating hours: 22,574 h, punching force: 20 t, total height: 2,082 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,270 mm, overall weight: 13,000 kg, controller manufacturer: AMADA, controller model: AMNC-F, product length (max.): 4,165 mm, General Data Machine weight 13000 kg Measurements height 2082 mm Dusdsx E Ecujpfx Aaaop Control Unit Brand AMADA Model AMNC-F Main Drive Punching force 200 Kn Dimensions Machine Length 4165 mm Movement X-Axis Movement 2500 mm Y-Axis Movement 1270 mm This AMADA AC2510 NT + MP 250 was manufactured in 2009. It features a 51-station turret and can handle sheet sizes up to 1270 × 5000 mm, with a maximum thickness of 3.2 mm for mild steel. The machine includes a loading system MP 250, enhancing its efficiency. Consider the opportunity to buy this AMADA AC2510 NT + MP 250 CNC punching machine. Contact us for more information. Application Types Punching

Year of construction: 2008, operating hours: 24,490 h, condition: ready for operation (used), General Data Machine weight 13000 kg Measurements height 2082 mm Control Unit Brand AMADA Model AMNC-F Dimensions Machine Length 4165 mm Main Drive Punching force 200 Kn This AMADA AC2510 NT was manufactured in 2008. It features a punching force of 200 kN and a turret capacity of 51 stations. It can handle sheet sizes up to 1270 × 5000 mm and thicknesses up to 3.2 mm. The machine supports a maximum sheet weight of 150 kg and offers high-speed turret indexing. If you are looking to get high-quality punching capabilities, consider the AMADA AC2510 NT machine we have for sale. Contact us for more information. Dusdex D Em Ijpfx Aaajp Application Types Punching

Year of construction: 2010, operating hours: 640 h, condition: ready for operation (used), This ERMAK EPP 1270 was manufactured in 2010. A CNC punching machine in excellent condition, it has been used for only 640 hours. Regularly maintained and fully functional, it is ready for any type of inspection and testing. Includes a tool sharpener and numerous tools. Reach out for more information about this machine. Application Types Dsdpfx Aasx Enk Ujaoup Punching

Year of construction: 2013, operating hours: 84,545 h, condition: ready for operation (used), General Data Dodpfx Aaex D Nwwjaoup Machine weight 17500 kg Main Drive Punching force 220 kN This TRUMPF TRUPUNCH 5000 S10 was manufactured in 2013. It features a Siemens Sinumerik 840D control system, a working area of 3050x1550 mm, and a punching press of 220 kN. Capable of handling sheet weights up to 280 kg and thicknesses up to 8 mm, it includes a Linear ATC for 21 tools and additional options like MULTITOOL and ENGRAVING. Regularly maintained and in good condition. Contact us for more information about this machine. Application Types Punching

Year of construction: 2009, condition: ready for operation (used), Main Drive Punching force 1250 kN This KALTENBACH KPS 506 was manufactured in 2009. It's an automatic punching and shearing system for flat bars and angle profiles, featuring a 6-tool automatic changer with hole diameters ranging from Ø5–40 mm. It supports straight and mitre cutting with a working range of 50 × 5 mm to 500 × 25 mm. Includes NC-controlled automatic feeding and a finished part delivery unit. Contact us for more information about this machine. Application Types Punching Dodpfxjx D I U Uj Aaaoup

Condition: ready for operation (used), Year of construction: 2008, General Data Machine weight 21000 kg Table Table load 160 kg Dujdpfjx Enlxex Aaaop Main Drive Number of axis 2 Movement X-Axis Movement 2500 mm Y-Axis Movement 1525 mm This AMADA EMZ 3610 NT was manufactured in 2008. It features a press force of 300 kN, can handle material up to 4.5 mm thick, and supports a maximum table load of 160 kg. The machine includes 45 turret stations with auto-index and achieves a stroke rate of 1000 strokes/min. If you are looking to get high-quality punching capabilities consider the AMADA EMZ 3610 NT machine we have for sale. Contact us for more information. Application Types Punching

Condition: excellent (used), Year of construction: 1990, machine/vehicle number: 1203697, Bros. punching press Make: Haulick & Roos Type: RVD 8/800 NS Press with adjacent console: Haulick & Ross RVD 80-800NS Eccentric press with double connecting rod with 4-fold bearing mounted eccentric shaft No: 1203697 YEAR OF MANUFACTURE: 1990 Press force: 800kN Speed: 30-300/min. Drive: 26kW Ram stroke: 4-60mm ram adjustment: 80mm Table: 800x640mm Fold-through hole: 780x60-160mm Table over floor: 1240mm Frame width: 780mm Lateral upright width: 350mm Installation height max. stroke bottom/ram top: 300mm Space required for press (LxWxH): 3200x1700x3000mm Control cabinet (LxWxH): 1800x400x 1900mm Weight: 12.000kg Reel: Eigl 2527-90 Driven: no Straightener with strap loop sensor: Eigl RST W37/300 (2528-90) Max. width: 300mm Max. Thickness: 3mm Number of rolls: 5 Dodpfjudn Utox Aaasup Feed rate: Haulick & Roos RS 260/120°/2727 Max. Feed length 260mm Max. Width 260mm Max. Max. thickness 3mm Feed speed 40m/min. Material cross-section up to 800mm?

Condition: ready for operation (used), Productielijn voor de fabricage van metalen rekken 14 stations: dubbel aangedreven Asdiameter 80 mm station lt;- station: 400 mm Verstelbare hartafstand assen: min. 100 mm; max. 280 mm Maximale invoerbreedte: 780 mm maximale dikte: 3 mm staal Inbegrepen: - Colombo excenterpers 100 ton voor ponsen Slag: 150 mm 16,5 pk Tafel: 600 x 1000 mm Slagen/min: instelbaar van 30 tot 90 slagen/min. - 4-koloms pers op rails die functioneert als vliegende schaar Tafel 400 x 400 mm - Lostafel Work mode: Roll forming unit Dedpfxjyru Hne Aaaoup Material thickness x width: W 780 mm Max Numbre of sections: 14 stations axle Ø80mm PUNCHING MACHINE: Punching press CUTTING DEVICE: Flying Shear Conveyor: Yes

Condition: used, Single-Column Eccentric Press WEINGARTEN Type EV 63 Machine No. 738 / 61 Year of manufacture: 1962 Pressing force: 63 tons Throat depth: 260 mm Table size: 630 x 530 mm Table opening: Ø 210 mm Ram area: 315 x 260 mm Adjustable ram stroke: 8–100 mm Ram adjustment: 63 mm Ram shank bore: Ø 40 mm, with clamping piece Installation height: max. 450 mm Strokes per minute: 115 spm Duedpfjk S Htxsx Aaaop Air requirement: min. 4.5 bar Motor power: 4 kW Electrical connection: 380 Volt, 50 Hz Table height above floor: approx. 750 to 900 mm - Electric stroke release via foot switch or two-hand control - Overload protection by shear plate - Clutch-brake combination via WEINGARTEN friction-threaded clutch with TDC safety - Front crankshaft support bearing - Press table height adjustable via 2 threaded spindles - Manual central lubrication system - Free-standing electrical cabinet - UVV (accident prevention regulations) for manual loading operations Space requirements (L x W x H): 1750 x 1600 x 2430 mm Weight: 4.5 tons In good condition

Condition: used, Combined profile steel shear and hole punch GEKA type HYD 80 / Hydracrop 80/A Machine. No. 9566 Year of construction approx. 2000 Punching force 80 ton. throat 300 mm Punching up to Ø 40 mm in 14 mm sheet metal Flat material shears 450 x 15 mm Angle steel shears 130 x 130 x 13 mm Square shears 45 x 45 mm Round material shears Ø 45 mm Rectangular notcher up to 12 mm Motor power 5.5 kW Mains connection 400 Volt, 50 Hz - Fence with el. stroke release 500 mm - Work table with stop for punching device 550 x 380 mm - Working height of the punching device 1100 mm Dujdpfxjrz Tuto Aaajp - Work table with stop for the rectangular notcher 550 x 400 mm - Working height of rectangular notcher 930 mm - approx. 21 different punching tools - operating instructions - Original paint finish, not repainted Space requirement L x W x H 1800 x 1150 x 1950 mm Weight 1.7 tons. very good condition

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Euromac horizontal bending machine Digibend 160 160 tons press force Dujdpfx Aajyrntzjasp with tools

Condition: used, punching force max. 50 t throat 510 mm stroke 32 mm stroke - stepless adjustable 10 - 32 mm no. of strokes 35 bei 10 mm Hub/min Working height 1070 mm daylight 350 mm table width 255 mm dimensions ca. 1080 x 650 x 1680 mm material layer 630 X 535 weight ca. 1400 kg Scraper, height-adjustable and removable, with interchangeable plate Djdpfx Aoyrhyueaaeup Hydraulic low-pressure finder for foot switch operation Two-stage foot switch and electrical controls Integrated hydraulic unit With punching saddle for dies no. 3 and 4, up to Ø 39.5 mm Quick-change device for punches 3 and 6 up to Ø 39.5 mm Peddinghaus blue series with material support table no. 513, dimensions 630 x 535 mm

Condition: good (used), Year of construction: 2004, functionality: fully functional, Punching force: 220 kN Sheet thickness: 8 mm Working area: 2535x1280 mm Sheet thickness for stainless steel: 4-6 mm Accessories: - Tool change cassettes - Table with ball rollers - Operating hours: 97,000 Duedpfx Aoyrcycoaajp

Condition: good (used), mileage: 944,445 km, power: 368 kW (500.34 HP), first registration: 09/2018, fuel type: diesel, tire size: 385/65R22,5, axle configuration: 4x2, wheelbase: 3,950 mm, fuel: diesel, brakes: retarder, color: blue, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, total length: 6,220 mm, total width: 2,550 mm, total height: 3,850 mm, Year of construction: 2018, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, parking air conditioner, parking heater, power mirror, retarder, seat heater, traction control, = Additional Options and Equipment = - Heated mirrors - Bluetooth - Digital tachograph - Tachograph (control unit) - Fixed fifth wheel - Highline cab - LED lighting - Alloy wheels - Manual adjustment - Power take-off (PTO) - Pump - Radio/cassette - Lane departure warning system - Additional braking system = Notes = Number of axles: 2, Configuration: 4x2, Curb weight: 8,328 kg, Gross weight: 19,500 kg, Total fuel tank capacity: 700 liters, Fifth wheel height: 122 cm, Fifth wheel: Fixed, Number of differentials locks: 1, Alloy wheels, Suspension type: Air suspension, Cab type: Highline, Cruise control, Tachograph (control unit), Digital tachograph, Air conditioning, Parking air conditioning, Parking heater, Electric windows, Electric mirrors, Radio/cassette, GPS navigation, Colour: Blue, Metallic, Heated mirrors, Lighting type: LED lamp, Lane departure warning system, Air conditioning, Seat heating, Bluetooth, Engine power: 368 kW (493 Hp), Fuel type: Diesel, Emission standard: Euro 6, Transmission type: Opti-cruise, Transmission make: Scania, Gears: 12, Additional braking system, Retarder brand: Scania, Power steering, ABS, ASR, Power take-off (PTO), PTO type: 2, Starter battery, Pump, Central locking, Seating configuration: 1+1, Seat material: Leather, Seat adjustment: Manual, NB FULL AIR / LEATHER / ALCOA'S / NIGHT AIRCO / KING OF THE ROAD = Further Information = Transmission Transmission: SCA, 12 gears, automatic Axle Configuration Brakes: Disc brakes Suspension: Air suspension Axle 1: Tire size: 385/65R22.5; Steered; Left tire tread: 5 mm; Right tire tread: 5 mm Axle 2: Tire size: 315/80R22.5; Twin tires; Left inner tire tread: 3 mm; Left outer tire tread: 6 mm; Right inner tire tread: 4 mm; Right outer tire tread: 4 mm Weights Unladen weight: 8,328 kg Payload: 11,172 kg Gross vehicle weight: 19,500 kg Functionality Pump: Yes Interior Upholstery: Leather Maintenance APK (Dutch general inspection): valid until 10.2026 Condition Technical condition: Good Duodpeyrb Ewsfx Aaajp Cosmetic condition: Good Damages: None Number of keys: 3 Identification Registration: KLEYN1 = Company Information = Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our inventory includes all European brands, years of manufacture, and price ranges. Why buy from Kleyn Trucks? Simple! • Large and fast-changing inventory • Recognizable quality • Competitive prices • Proper business conduct • Multilingual staff • We understand our customers • Import and transport support • (Export) license plates issued quickly • Expert technical services • The assurance of 'recognizable quality' • And more.... Please visit our website for special offers and the complete stock list: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and send an inquiry via our website. Ask directly about our European warranty package.

Condition: new, Year of construction: 2025, Sliding clip formers are used to produce fixation sliding clips for double standing seam roofing panels. Before installation roofing panels have to be made using roll former roofing machines. After finishing of panels production and preparing roofing works panels can be installed on roofing place with special fixation clips. Those clips, depending on design, could be fixed or sliding ones. Fixed clip has simple and cheap design so it can be good for small roofs that doesn’t have long length panels. Sliding clip are good for big roofs with different designs and long-length panels. Sliding clips can move and self-find perfect position so not be damaged and safe for roof while temperature expansions. We offer punching presses for making both fixed and sliding clips. Dujdpfjqxalxjx Aaasp We make sliding clip formers for 25, 27 or 39mm clip highs For sliding expansion clips productions there have three presses to be used. First sliding clip bottom part press is used for punching bottom part of sliding clip with fixation round holes and connection oval hole. At the same time this press cuts metal strip with necessary length. Blank for clip production is easy to get using manual guillotine or cut-to-length slitting machine. Second sliding clip bottom part bender is used for bending of sliding clip bottom part to 90 degrees angle. So, after this operation bottom part is ready. Third clip former makes top part of sliding clip at the same time forming and bending it. After producing bottom and top part of sliding clip you can easily connect it to one working sliding clip. So using sliding clip formers that we offer you can easily make expansion clip and use it while double standing seam roofing installation without any unnecessary deformations. Maximum metal thickness you can work with -1mm. To get more information about sliding clip former we produce please contact our sales department.

Condition: used, Year of construction: 2015, Working hours machine: 31888 (17.01.2024) h Working hours laser on: 19090 (17.01.2024) h Working hours beam on: 6475 (17.01.2024) h Laser power: 4000 Watt Max. punching force: 300 kN Control: AMNC 3i Working range laser: 2500 x 1170 mm Working range punching: 3050 x 1525 mm Length: 7870 mm Width: 5880 mm Height: 2666 mm Electrical connected load: 85 kVA x-axis: 100 m / min y-axis: 80 m / min Weight of machine approx.: 30000 kg Standard configuration - Patented servo-electric double drive- Punching force 300 kN- 32 tool stations (4 rotatable stations)- max stroke rate: 400- max material thickness 6mm- Automatic focus adjustment- Automatic gas pressure control- HS sensor cutting head- Nozzle cleaning- Splash guard- Good parts flap Duedpfx Aoypt R Heaaep Extended machine accessories - TSU tool changer 300 Automation

Condition: ready for operation (used), - invoersysteem voor plat- en hoekstaal - met toevoerwagen en materiaalklem - Vacon 110 software CNC-besturing Hydraulische schaar voor vlak staal VPS 2200 cap: 220 ton maximale lengte: 15 200 mm breedte/dikte: 500/25 mm hoek: +/- 45° Hydraulische hoekschaar voor staal VHS 2400 cap: 240 ton maximale lengte: 15 200 mm 200 x 200 mm / 16 mm Hydraulisch ponsen VPO 1000 Dsdswlkw Dopfx Aaaeup cap: 100 ton ponsdiameter/dikte: 57/15 mm of 32/25 mm 4 ponsunits voor vlak staal (Verticale positie) 1 ponseenheid voor hoekstaal (horizontale positie) incl. gereedschap Hydraulische teller VNI 1/36 1 codeerschijf 36 tekens tekenhoogte x diepte: 10 x 1 mm Hydraulisch aggregaat VHA 37 37 kW - 250 bar