Used Blind Rivet for sale (1,426)

Condition: used, Fully Automatic Riveting Machine, Riveting Automation, Blind Rivet Automation Blind Riveting Machine, Riveting Tool, Rivet Gun with Feeder System Blind Rivet Setter, Press Device Manufacturer: GESIPA Model: GAV 7000 Device No.: 5243052 Year of manufacture: 2002 Blind rivets up to Ø 5 mm for standard materials Blind rivets up to Ø 6 mm for aluminum Setting head diameter max. 11.4 mm Rivet shank length max. 25 mm Setting force of rivet gun 11,770 N Setting stroke 16 to 20 mm Operating pressure 6 to 7 bar Rivet gun weight 2.5 kg Power supply 230 Volt, 50 Hz. - GESIPA Automatic Rivet Gun - Hydropneumatic force multiplier integrated for hydraulic rivet gun - Rivet gun equipped with Ø 2.3 mm mouthpiece for approx. Ø 4 mm pop rivets - Bowl feeder SORTIMAT, Type SM 200/280 - Spent mandrel collection container, 3.5 liters - Hose pack length approx. 3.7 meters - Riveting unit with jib assembly on an aluminum system profile base frame - Base frame is mobile on 4 swivel castors with brakes - Jib made of aluminum system profile with pivotable arm (Height = 2800 mm, Arm = 1250 mm) - BALANCER BILANCIATORE (1-3 Kg) for the rivet gun - Various accessories such as wear parts e.g. jaw sets, etc. - Operating manual Required space Length 80 cm x Width 43 cm x Height 280 cm Weight of rivet unit without base 90 kg Weight of rivet unit with base 150 kg Good condition Operating Principle – The system operates fully automatically and is designed for high cycle rates: 1. Vibratory Feeder: The blind rivets are filled into a vibratory bowl at the top of the control unit. From there, the rivets are conveyed into the feed hose. 2. Automatic Feeding: When the trigger is actuated, the next rivet is pneumatically blown into the setting head and positioned. 3. Mandrel Collection System: The spent mandrel is extracted into a collection container in the control unit via a vacuum system. Sensors monitor the fill level of the container. Ppsdpjyvvkkefx Ahvsp 4. Monitoring: An electronic control system monitors all critical functions and displays operation statuses – for example, an empty rivet supply.

Condition: used, Cordless riveting tool, blind rivet gun, blind rivets Ppjdpfx Ahjdz Ul Isvep -Transfer in current condition as seen -The device works, the batteries are defective -without: batteries -Dimensions: 345/90/H250 mm -Weight: 5.3 kg

Condition: used, all stainless steel dimensions: ± 5.000 x 2.200 x 2.700 mm drum diameter: 1.300 mm net drum length 4.200 mm adjustable inclination angle easy to clean inlet height: ± 1.700 mm (adjustable if necessary) discharge height: ± 1.000 mm Pedpfxeyx Dnis Ahvepp power 3kW 400V, 50Hz 4 spray pipes Provided for extraction

Year of construction: 2003, condition: used, Roller conveyor, conveyor belt, roller conveyor belt, roller conveyor -Roller conveyor: not driven -Execution: difficult -Roll width: 940 mm -Roles: Ø 79 mm -Roll distance: 100 mm -Dimensions: 1670/1070/H280 mm Ppjdpfx Aod N Dc Uohvop -Weight: 206 kg

Condition: used, Year of construction: 1988, pressure 40 t throat 350 mm material thickness max. 12 mm power requirement 2,2 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 0,8 x 1,5 x 1,9 mxmxm SPECIAL DEAL as is where is, WITHOUT additional work free loaded to truck Pjdpsvut Dmofx Ahvspp Wobbling / Riveting machine maximum material thickness approx. 12 mm at 12 mm material thickness: stamping power (diameter) approx. 24 mm at 6 mm material thickness: stamping power (diameter) approx. 50 mm

Condition: used, machine/vehicle number: 003, Number of heating chambers: 5 Chamber size: 140 Ø x 150 mm high tested maximum temperature: 1000°C electrical connection: 400 V, 13 kW space requirement: 550 x 1600 x 1830 mm Weight: 492 kg Ppodpfx Ahsbn I Tzjvep

Condition: used, Year of construction: 2012, pressure 6 bar voltage 24 V weight of the machine ca. 1,75 t length in total 1500 mm length in width 900 mm Ppsdpsx Tu R Refx Ahvsp Total height 2100 mm Riveting machine, automatic riveter by Arnold Shinjo Technical data and specifications are subject to change without notice. Prior sale reserved.

Year of construction: 2016, condition: used, functionality: fully functional, Radial riveting machine KARDEŞLER Pedeywygxopfx Ahvopp

Year of construction: 2019, condition: used, functionality: fully functional, AGME radial riveting machine Ppodpfxsywydqj Ahvop

Year of construction: 2019, condition: used, functionality: fully functional, AGME radial riveting machine Pedpoywx Iusfx Ahvspp

Condition: excellent (used), functionality: fully functional, 1 Used Haeger 412 Insertion Machine Sheet Metal Inserts Stud & Nut Self Clinching For Sale Ppjdswbhipspfx Ahvsp With tooling and J shape lower tool

Condition: good (used), Hang 150 Double-Head Riveter for Binders Manufacturer: Hang Germany Machine has been overhauled and is ready to use. The machine is used for riveting all types of ring mechanisms. Two riveting heads with adjustable spacing. Cardboard thickness: 0.2-4mm Throat depth: 310mm Pedpfxoynfy De Ahvepp Head spacing: adjustable from 35-440mm Cycle time: 0.5s Weight: 570kg Power supply: 380V The cycle is initiated by a foot pedal.

Condition: good (used), Sicom B163-5 Double-Head Binder Riveter Manufacturer: Sicom, Italy Very good condition, ready for production. Double head riveting machine to fit two rivets simultaneously on ring-binders, sample books and similar products. Cardboard thickness: 0.5-4 mm Maximum board size: 1000 x 900 mm Weight: 170 kg Pneumatic supply: 6-8 bar Automatic rivet feeding, material piercing, and mechanism crimping. Pjdpfsynfvxox Ahvjpp

Condition: excellent (used), functionality: fully functional, Riveting machine with pneumatically controlled 6-station rotary table. Riveting process triggered via foot pedal. Maximum rivet shank diameter for steel rivets: Ø 8 mm. Working stroke adjustable from 5 to 40 mm. Functional video available and can be provided upon request. Very good condition, immediately available! Pedpfx Ahsyq Nqxjvopp

Condition: used, Wobble riveting head BODMER KÜSNACHT Type FMK 3 Podpfjglarlex Ahvjpp Year of manufacture approx. 1980 rivet shaft diameter: max. 10 mm tool diameter: 12 mm rivet head stroke: 40 mm riveting spindle speed: approx. 1400 rpm motor power: 0,37 kW Mains connection: 380 Volt, 50 Hz - Riveting pressure adjustment infinitely variable via hydraulic pressure - Micrometer stop for stroke limitation - stroke movement via oil hydraulics (max. 45 bar) - machined flange surface Ø 115 mm with fixing nut on housing total length: approx. 800 mm weight: approx. 40 kg good condition The rivet head has a multi spindle head to set 2 or 3 rivets at the same time. This can be dismantled and used normally. For normal use the normal wobble head which holds the tool is missing.

Condition: used, Orbital Riveting Machine Double Riveting Automatic with Rotary Indexing Table DUNKES Type DN 4 Rotary table with SIEMENS control system Machine no. P 81 - 5458 Year of manufacture: 1982 / 2009 Rivet shank diameter max. 12 mm Tool shank diameter 16 mm Throat depth 190 mm Rivet head stroke per riveting unit approx. 60 mm Riveting spindle speed approx. 1,400 rpm Tool-to-anvil installation height max. 80 mm Compressed air requirement 6 bar Motor power per riveting unit 1.1 kW Power supply 380 Volt, 50 Hz - Rotary indexing table with servo drive, indexing step size programmable via Siemens PLC control - Double riveting unit is adjustable within the machine frame relative to the indexing table - Table diameter Ø 295 mm for accommodating round workpieces - Pneumatic riveting stroke motion - Riveting unit adjustment via gear motor with leadscrew, positioning via adjustable micro switch - Modernization of the control system and retrofit with servo drive for the rotary table in 2009 - New electrical control cabinet with Siemens Simatic panel – built in 2009 - Riveting time infinitely programmable - Riveting pressure infinitely adjustable via pressure gauge - Micrometer stop for stroke limitation of the opposing riveting units 0–60 mm Space required L x W x H 3200 x 1250 x 2400 mm Psdpfxjdzp T No Ahvjpp Weight approx. 2,500 kg Good condition The machine was used for riveting segment saw blades from Ø 400 to Ø 2000 mm. The segments were manually placed onto the carrier disc and fixed with straight rivet pins. The opposing riveting unit simultaneously rivets the pin from both sides. The controlled table automatically rotates to the next working position after each cycle. Ideal for saw blade manufacturers and repair shops. Alternatively suitable as a basis for constructing a special-purpose machine.

Condition: new, Year of construction: 2025, Pneumatic radial riveting machine RMU-12-C is designed for forming caps in solid steel rivets d=2...12 mm and in tubular steel rivets d=4x1...14x1 mm. This riveting machine can be used for movable and immovable riveted connections. Technical data: 1. Diameter of solid steel rivets - 2...12 mm. 2. Diameter of tubular steel rivets - 4...14 mm. 3. Motion of riveting head - 20 mm. 4. Time of unriveting for one rivet - 1...10 sec. 5. Motor power - 0,75 kW. Ppedpfsfvztuox Ahvop 6. Voltage - 220/380 V 50 Hz. 7. Working pressure - 3...6 Bar. 8. Weight - 100...120 kg.

Condition: used, Nietmaschine / Riveting machine Hang 162-01 Baujahr / Year 1993  - SN. 39709 Arbeitstiefe (Ausladung) / Working depth (projection) 620mm Taktzeit / Cycle time 0,7sec Niethub / Rivet stroke 55mm Arbeitshöhe / Working height 1100mm Nietschaftsdurchmesser / Rivet Diameter 2-4mm Antriebsleistung / Drive capacity 0,37 kW Geeignet für Verarbeitung von Halbhohlniete, Vollniete, Hohlniete, Rohrniete, Zweispitzniete, Doppelhohlniete (Zuführung des Nietkäppchens), Nietmaschine für mittlere bis große Serien Suitable for processing semi-tubular rivets, solid rivets, hollow rivets, tubular rivets, two-point rivets, Ppedjv D H Htjpfx Ahvsp double-tubular rivets (feed of the rivet cap), riveting machine for medium to large series Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, machine/vehicle number: 7006, Nietmaschine - Riveter Stocko WP 100 b Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Pedpfxjrgb Amj Ahvopp

Condition: excellent (used), Year of construction: 2005, Yoshikawa US-66 riveting machine 5mm high spin manufacturer: Yoshikawa "Japan" type: US 66 - Crimping ability (Mild steel rivet) φ5 mm or less - Spinning head: 5-40 mm - Distance between tabletop and punch: 90-285 mm - Table working surface size: 250x250 mm - Processing time setting range: 0.2-9 seconds - Normal pressure: (Varies depending on pressing conditions) 2-5 kg/cm2 Air consumption: Psdpfx Aoxlt Uijhvspp Power supply and motor Three-phase 200V 0.12kw Machine size Width 330 x depth 610 x height 800mm Machine weight 95

Condition: excellent (used), functionality: fully functional, Brother Hi-Spin riveting machine 5mm high spin Type: BR1-103 - Crimping ability (Mild steel rivet) φ5mm or less - Spinning head: 20-40mm - Distance between tabletop and punch: 60-180mm - Table working surface size: 310 x 180mm - Processing time setting range: 0.3-5 seconds - Normal pressure: (Varies depending on pressing conditions) 2-5kg/cm2 Air consumption: Psdpfx Ahowdwv Revjpp Power supply and motor Three-phase 200V 0.2kw 4Pole Machine size Width 390 x depth 510 x height 1000mm Machine weight 95kg

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, input voltage: 220 V, throat depth: 172 mm, type of input current: three-phase, overall weight: 110 kg, operating pressure: 6 bar, input frequency: 50 Hz, power: 0.12 kW (0.16 HP), spindle stroke: 40 mm, table length: 250 mm, table width: 250 mm, Yoshikawa US-66 riveting machine 5mm high spin type: US 66 - Crimping ability (Mild steel rivet) φ5 mm or less - Spinning head: 5-40 mm - Distance between tabletop and punch: 90-285 mm - Table working surface size: 250x250 mm - Processing time setting range: 0.2-9 seconds - Normal pressure: (Varies depending on pressing conditions) 2-5 kg/cm2 Air consumption: Power supply and motor Three-phase 200V 0.12kw Machine size Width 330 x depth 610 x height 800mm Machine weight 95 kg If you need more information. We are here to help! Please contact us using the contact form or give us a call Ppedewd Uf Nspfx Ahvop Your ad has been automatically translated. Translation errors are possible.

Condition: good (used), Stock number: 2225 Manufacturer: AGME Spain Type: RR14 Year of construction: 2005 Machine number: 3815 Control unit: CU 301 Table: 350 x 300 mm Podporhza Sjfx Ahvopp Riveting capacity max.: 14 mm diameter Stroke: 5 to 50 mm adjustable Distance table-head: 60 to 270 mm Air connection: 6 bar Riveting force: 1,880 daN Riveting time: 0 to 5 sec adjustable Projection: 180 mm Equipment: 5-fold riveting head, two-hand operation; Connection: 1.6 kW Dimensions: 500 x 720 x 1,200 mm Weight: 0.3 t Condition: tested, ready for use

Condition: good (used), Blind stitch sewing machine for sewing of belt loops. Warranty & Delivery The Machine si delivered complete The quality assurance of the machines is entirely conferred by our team of professional technicians. The machine is of superior quality, recommended for all types of workshops as well as for factories with medium and large productions. When purchasing this machine, you have a 6-month warranty and a 5-year post- warranty. WORLDWIDE DELIVERY! We always have more than 1000 machines in stock so that each customer can choose from several options. With over 20 years of experience in the textile industry and over 10,000 satisfied customers, we make sure that your plans become successful businesses! Pedsrq Eg Djpfx Ahvopp

Condition: used, Year of construction: 1995, Technical details: throat: 1000 mm air pressure: 6,0 bar total power requirement: 5,0 kW weight of the machine ca.: 0,4 t dimensions electric cabinet LxWxH: 1,03 x 0,4 x 2,05 m dimension machine xH: 2,6 x 1,0 x 2,3 m AUTOMATIC DRILLING AND RIVETING MACHINE Application: automatic drilling and riveting of sheet metal parts. Features: - Rivet Ø 3.2 - 4.0mm, rivet length 6.0 - 10.0mm; riveting force = 40,000N. - Drilling: Speed up to 5,000 rpm, drilling feed 50 - 1,500 mm/min, stroke height 80mm. - Clamping: clamping force 50 - 400 daN, lower tool 75mm adjustable - Hydraulics: pressure 128 bar, supply 14 l/min, power 4 kW - Pneumatic: pressure 6 bar, supply 9,5 l/sec. - Operation via control panel or/and foot switch. Equipment: - side table - 8 oscillating conveying heads Pedpfou Ictnox Ahvspp - hydraulic power unit accessories: - Tool cabinet, div. drill countersink, 2 closing heads, hold-down and other div. tools comparable in photo. *