Used Wood Machining Center for sale (72,670)

Condition: good (used), Year of construction: 2001, DMG / MAHO DMC 80 U – CNC Universal Machining Center Manufacturer: MAHO / DMG Model: DMC 80 U Machine Type: CNC Universal Machining Center Year of Construction: 2001 Machine/Factory Number: 71.408.395 Control System: MillPlus IT Operating Hours: approx. 90,896 h Spindle Operating Time: approx. 44,717 h Main Spindle Maximum Spindle Speed: 12,000 rpm Tool Draw-in Force Target: 22 kN Measured Tool Draw-in Force: 17 kN Spindle/Geometric Runout at L = 0 mm: 0.005 mm Spindle/Geometric Runout at L = 200 mm: 0.005 mm Tool Management Tool Magazine: 120 tool positions Automatic Tool Changer Tool gripper disassembled and cleaned as part of the last documented maintenance Pallet Automation 6 pallet positions Automated pallet handling system available Rotary/NC table available B and C axes available, according to the electrical maintenance report Axes / Drives Documented in the maintenance report of 2026 NC rotary table and axes Pallet changer / pallet handling Tool magazine / tool changing system Coolant and filter system Coolant system Chip conveyor Interlit compact filter Spindle oil cooler Smoke/mist extraction Ringler extractor During the documented maintenance, the following were carried out, among others: Coolant tank steamed and cleaned Chip conveyor cleaned Extraction system cleaned Tool gripper disassembled and cleaned Pressure accumulator checked and refilled with nitrogen to 80 bar Extractor cleaned Machine geometry checked Hydraulics / Lubrication Spindle cooling unit Hydraulic unit NC rotary table Oil changed during maintenance Central lubrication Lodpez D Stfofx Af Sshl Performed by DECKEL MAHO Pfronten. The following were checked or serviced, among others: Electrical cables Control cabinet Hydraulic lines and hoses Compressed air system Check valves Axes Lighting Filters Machine function Emergency stop system Door locks Two-hand operation Machine geometry Electrical safety Check valves were renewed according to the maintenance report Electrical check very good according to DIN EN 60204 Insulation measurements – excerpt All documented measurement points were evaluated as OK. Main spindle motor: 192 MΩ X-axis: 255 MΩ Y-axis: 103 MΩ Z-axis: 427 MΩ B-axis: 279 MΩ C-axis: 108 MΩ Tool magazine: 267 MΩ Pallet changer drive: 113 MΩ Pallet changer linear drive: 90 MΩ Vertical stroke pallet changer: 1.12 GΩ Smoke extraction: 97 MΩ Chip conveyor: 1.42 GΩ Tool gripper: 1.66 GΩ Hydraulics: 2.21 GΩ Machine lamp: 447 MΩ Lubrication: 3.26 GΩ Protective conductor test Specification: < 0.3 Ω Measured values: Protective door machine: 0.16 Ω Protective door pallet changer: 0.26 Ω Control panel tool changer: 0.13 Ω Coolant system: 0.11 Ω Spindle cooler: 0.21 Ω Control panel work area: 0.03 Ω Spindle: 0.22 Ω Ringler extractor: 0.21 Ω All documented measurement points are within the specified target range. Equipment CNC control system MillPlus IT Universal machining B-axis C-axis / NC rotary table 12,000 rpm spindle 120-position tool magazine 6-position pallet system Automatic tool changer Automatic pallet handling Coolant system Interlit compact filter system Chip conveyor Spindle oil cooler Smoke/mist extraction Ringler extractor Hydraulic unit Central lubrication Comprehensive safety equipment Geometry test, runout value of 0.005 mm at a measuring length of 200 mm Tool draw-in force 17 kN, target value 22 kN

Condition: like new (used), Year of construction: 2020, operating hours: 9,422 h, functionality: fully functional, We are selling, on behalf of a client, a used, recent-model, like-new 5-axis machining center with a GANTRY design; model DMU 340 Gantry; year of manufacture 2020; 9422 operating hours; 2991 spindle hours. It features a SIEMENS CELOS operator interface. All specifications, technical data, or configurations of the machine are available upon request. The machine is available for demonstration and can be inspected immediately. Further original photographs are available upon request and after verification of your identity. A resale to dealers is not currently planned. Please refrain from making such inquiries. Lhjdpfx Afjzx Ek Ao Ssl

Condition: used, Year of construction: 2009, total height: 2,500 mm, total length: 40,500 mm, total width: 2,400 mm, Colour: Blue Empty weight: 30.900 kg Price: On request 4 tool changers, 24 pcs each Plus external magazine 117 positions Drilling unit 2, 4x horizontal only Lhodpfx Ajzt Nadof Sel Incl. Oertli tools Max. machining length 6 meters NEXUS Software (HMI) Output table 320x360 cm Operating hours cannot be read out - Year: 2009 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 113040 - Number of milling spindles [pcs.]: 6 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 3 - - Min. spindle speed [rpm]: 0 - - Max. spindle speed [rpm]: 18000 - - Main motor power [kW]: 20 - └ Milling spindle 2: - - Number of controlled axes [pcs.]: 3 - └ Milling spindle 3: - - Number of controlled axes [pcs.]: 4 - - C-axis present: Yes - └ Milling spindle 4: - - Number of controlled axes [pcs.]: 4 - - C-axis present: Yes - Tool holder: HSK-F63 - Drilling unit present: Yes - └ Motor power [kW]: 2.5 - └ Horizontal drill spindles [pcs.]: 4 - └ Vertical drilling spindles [pcs.]: 6 - Tool changer positions [pcs.]: 24 - System/software: Nexus - Safety feature: Enclosed fence, Door interlock switches - Tools included: Yes - CNC options: Unloading system, Loading system, Label machine - Table length [mm]: 6000 - Table width [mm]: 3800 - Installed length [mm]: 26000 - Installed width [mm]: 9500 - Installed height [mm]: 2850 - Transport dimensions: 40500mm x 2400mm x 2500mm (l x w x h) - Transport weight [kg]: 30900kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2006, Working area X-Y-Z: 5300 x 1700 x 180 mm Travel length X-Y-Z: 6040 x 1810 x 280 mm Drilling head with 30 + 8 spindles Speed: 6000 rpm Power: 2.2 kW Automatic central lubrication Worktable TV with 10 supports L=1500 4 working zones 2 cross lasers Vacuum pump 250 m³/h PC control Windows Vertical milling unit ISO 30 7.5 kW with tool changer RAPID 14 and vector axis Lhodpfex Twd Hox Af Sjl Additional drilling unit (E-axis) Dongle for XILOG software Location: Nattheim

Condition: used, Year of construction: 2014, functionality: fully functional, Travel ranges Travel distance X-axis [mm] 760 Travel distance Y-axis [mm] 530 Travel distance Z-axis [mm] 560 Distance from spindle bottom edge to table [mm] 150-710 Work table Table length [mm] 900 Table width [mm] 500 Number of T-slots 5 Slot width [mm] 18 Table load max. [kg] 500 Feed Rapid traverse X- and Y-axis [m/min] 40 Rapid traverse Z-axis [m/min] 36 Max. axis acceleration X-axis [m/sec²] 6 Max. axis acceleration Y-axis [m/sec²] 5 Max. axis acceleration Z-axis [m/sec²] 5 Max. feed force X-axis [kN] 6.951 Max. feed force Y-axis [kN] 6.951 Max. feed force Z-axis [kN] 11.31 Diameter of ball screw X- and Y-axis [mm] 45 Diameter of ball screw Z-axis [mm] 45 Main spindle Main spindle speed min. [1/min] 30 Main spindle speed max. [1/min] 12,000 Main spindle power [S6-40% duty cycle kW] [kW] 25 Main spindle torque max. [Nm] 159 Tool holder SK 40 DIN 69871 A Tool magazine Number of tool magazine positions 30 Tool change time chip-to-chip [sec] 4 Max. tool diameter [mm] 76 Max. tool diameter with adjacent space available [mm] 125 Max. tool length [mm] 280 Max. tool weight [kg] 7 Coolant system Coolant tank volume [l] 300 Through-spindle cooling pressure [bar] 3.5 Through-spindle cooling [l/min] 60 Internal coolant supply pressure [bar] 20 Internal coolant supply [l/min] 25 Chip flushing pressure [bar] 3.5 Chip flushing [l/min] 60 Coolant spray gun yes External compressed air supply yes Separate oil cooler for main spindle yes Oil cooling circuit [l] 100 Lhsdpfxsz Dttgo Af Sel Separate air supply for main motor yes Basic machine data Installation area width [mm] 2,540 Installation area depth [mm] 2,600 Machine height [mm] 2,930 Weight of basic machine [kg] 6,400 Electrical connection power [kVA] 25 Required pneumatic connection [bar] 6 Required compressed air [l/min] 300 Control system Manufacturer Heidenhain Control system type iTNC 530 HSCI with SmarT.NC Chip disposal Internal screw conveyor 2 Scraper belt conveyor to the outside 1

Condition: good (used), Year of construction: 2014, functionality: fully functional, HAAS VF-2SS | 4th axis | Through-spindle coolant | 2014 Vertical CNC Machining Center HAAS VF-2SS, manufactured in 2014. Machine equipped with a 4th axis and through-spindle coolant (TSC). Technical specifications: X-axis travel: 762 mm Y-axis travel: 406 mm Z-axis travel: 508 mm Table size: approx. 914 × 356 mm Max. table load: approx. 680 kg Spindle speed: 12,000 rpm Spindle taper: CT/BT 40* Spindle drive: direct drive Tool changer: 24+1 positions* Rapid traverse X/Y/Z: up to 35.6 m/min CNC control: HAAS Through-spindle coolant (TSC) 4th axis included Tool holders: not included Year of manufacture: 2014 Lhedpjz Dh Edefx Af Sol Operating hours: not available Previous operation: 2–3 shifts Equipment: 4th axis Through-spindle coolant High-speed Super Speed (SS) version Automatic tool changer Coolant system Machine inspection can be arranged by prior agreement.

Condition: not inspected (used), Year of construction: 2000, travel distance X-axis: 610 mm, travel distance Y-axis: 405 mm, travel distance Z-axis: 510 mm, overall weight: 4,000 kg, spindle speed (max.): 8,000 rpm, Ultimax control system Table: 760 x 400 mm Travel: 610 x 405 x 510 mm Tool changer: 24 tools Maximum spindle speed: 8,000 rpm Weight: 4,000 kg Lhsdpfxjy T Ekbj Af Sol

Condition: used, Year of construction: 2008, operating hours: 48,899 h, HARDINGE BRIDGEPORT XR 1600 MACHINING CENTER YEAR: 2008 MANUFACTURER: HARDINGE TAIWAN PRECISION MACHINERY LDT MODEL: XR 1600 CNC: HEIDENHAIN iTCN 530 Features Axis Travels: X-axis: 1600 mm Y-axis: 700 mm Z-axis: 610 mm Rapid Traverse Rates (X/Y/Z): Up to 36 m/min Table: Dimensions: 1700 mm x 700 mm Maximum Load Capacity: 1500 kg Spindle and Tool Holder: Spindle Taper / Tool Holder: ISO 40 (BT40/DIN standard) Spindle Speed: 12,000 rpm Motor Power: 22 kW / 30 HP Automatic Tool Changer (ATC): Capacity: 24 positions Type: Swing arm type. Ljdpoz Dv S Ssfx Af Sshl Machine comes with manuals and CE declaration of conformity. All technical data provided is indicative and may be subject to change without prior notice, and therefore should not be considered binding.

Condition: good (used), Year of construction: 1985, functionality: fully functional, total height: 2,480 mm, total length: 2,300 mm, total width: 2,400 mm, overall weight: 4,750 kg, spindle speed (max.): 6,000 rpm, Manufacturer Mazak with chip conveyor and accessories Type VQC-15/40 Year of manufacture 1985 Technical data X-axis travel 560mm Y-axis travel 410mm Lhjdpfx Aezq Hwnef Sol Z-axis travel 380mm Control system Mazatrol CAM M-2 Table length 900mm Table width 410mm Workpiece weight 300kg Tool changer 30 Spindle taper CAT 40 Max. spindle speed 6000rpm Spindle motor power 7.5KW Length x width x height 2300.0 x 2400.0 x 2480.0 Weight 4750 kg

Condition: excellent (used), Year of construction: 2010, Cutting center for PVC profiles, feed direction from left to right, including printer, dust extraction system, and inclined conveyor belt for cut-off pieces. Lhsdpsz Dk Dvjfx Af Sol

Condition: good (used), Year of construction: 2002, functionality: fully functional, 3-axis machine Working area: X-axis: 3,000 mm Y-axis: 1,200 mm Height above the top edge of the suction plate: 100 mm 6 work piece supports, each with 2 tubeless vacuum suction cups, each with 1 rear and 1 front work piece stop 1 work piece stop in the Y direction (left and right) Lodpfez D A Rbsx Af Sjhl 4 lifting rails for placing heavy work pieces, automatically lowerable 1 vacuum pump, 100 cbm/h Machining units: Main spindle, 5 kW Speed: 1,500 - 24,000 RPM water-cooled Rotation direction: left & right Automatic tool magazine with 8 positions moves directly along with the milling spindle for milling tools only Vertical drilling unit with 14 spindles Spindle spacing: 32 mm All spindles can be controlled individually Speed: 6,000 - 9,000 RPM Horizontal drilling/sawing unit 4 spindles Feed stroke: 80 mm Drilling diameter: max. 12 mm Grooving saw diameter: max. 125 mm Unit can be swiveled 0 / 90 degrees Control / Software IMAWOP 5.0

Condition: used, Year of construction: 2022, Unwinding machine with centering belts, Nanmak DS 760 Year of manufacture: 2022 Condition: Test machine Lsdpfxsz A R Tno Af Sshl Infeed/outfeed belt speed adjustable separately Roller speed adjustable Roller gap adjustable Belt width 76 cm Working length 172 cm Length per belt 81 cm Belt height from the ground: 108 cm Centering belt also available as a 3-row version Flour spreader External dimensions (L x W x H): 172 x 110 x 150 cm

Condition: good (used), Year of construction: 1998, operating hours: 13,143 h, functionality: fully functional, nominal power (apparent): 22 kVA, controller manufacturer: Siemens, controller model: Sinumerik, input voltage: 400 V, For sale is another CNC vertical machining center, a DECKEL MAHO DMC 63 V from 1998, used and in good condition, commensurate with its age. The machine is operational and can be inspected in person with power applied, by prior arrangement. • Year of manufacture: 1998 • Control system: Siemens Sinumerik Ljdpfx Aoz Dplfsf Sjhl • 4th axis with clamping device • Tool magazine • Coolant system • Operating hours: approx. 13,143 hours in single-shift operation Mains voltage: 400 V Frequency: Hz Rated current: 17 A Apparent power: 22 kVA Auxiliary voltage: 230 V Control voltage: 24 V Type: DMC 63 V Serial number: A0883 Machine number: 999-d-076 If you have any questions or require further information, please feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2002, operating hours: 14,517 h, functionality: fully functional, travel distance X-axis: 750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 520 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, controller manufacturer: Heidenhain, controller model: iTNC 530, workpiece weight (max.): 350 kg, total height: 2,830 mm, total length: 2,600 mm, total width: 5,644 mm, table width: 500 mm, table length: 700 mm, table load: 350 kg, overall weight: 8,350 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 14,517 h, spindle nose: SK40 (DIN69871), number of spindles: 1, number of slots in tool magazine: 32, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, The Deckel Maho DMU 70 eVolution from 2002 is a 5-axis universal machining center that was considered one of the top-of-the-line milling machines at the time. We acquired this machine directly from the factory, and it is still in good working condition! The machine is currently operational at our facility and can be inspected by appointment. Lhsdpfx Afoz Apmio Sjl Additional options & accessories: - B-axis travel: 0° - 180° - C-axis travel: 360° continuous, resolution 0.001° - Chip conveyor - BEMA programmable coolant nozzle - BLUM tool laser - SPINVISTA EVO Rotoclear - Approx. 10 SK40 tool holders - Original Deckel Maho documentation and electrical diagrams Weight & dimensions: Approx. 8350 kg Approx. 2600 x 5644 (incl. chip conveyor) 2830mm (L x W x H)

Year of construction: 2024, operating hours: 150 h, condition: like new (used), functionality: fully functional, X AXIS (longitudinal) (mm) 7,500 Y AXIS (transversal) (mm) 1,280 Z AXIS (vertical) (mm) 640 A AXIS (vertical-horizontal rotation of the head) -90° ÷ +90° C AXIS (rotation on the vertical axis of the head) 0° ÷ 360° H AXIS (jaw positioning) (TKE 955 HP) (mm) 6,600 Lhsdpfx Afsz Dpduj Ssl P AXIS (jaw positioning) (TKE 955 HP) (mm) 6,600 ELECTRIC SPINDLE Maximum power in S1 (kW) 11 Maximum power in S6 (60%) (kW) 13.5 Maximum speed (rpm) 24,000 Maximum torque in S6 (Nm) 10.7 Tool holder taper HSK – 63F Maximum blade diameter 400 mm

Condition: used, Year of construction: 2018, Control Siemens x-travel 750 mm y-travel 660 mm z-travel 650 mm Swivel range 0 - 180 ° Swivel time (0°–180°) ca. 5 s X-axis acceleration 6 m/s² Z-axis acceleration 9 m/s² Y-axis acceleration 6 m/s² spindle tunring speed 12.000 U/min spindle diameter in front bearing 80 mm Torque S6-40% 210 Nm tool taper HSK 63 number of tool places 120 Pos. The machine was used for machining aluminum and, in our assessment, is in good used condition. Ledpfx Afsyrt A Ij Sohl It can be inspected under power by appointment. Technical features & accessories: - Twin spindle - 5-axis - Pallet changer - Minimal quantity lubrication Accessories, tools, and clamping devices shown are only included if explicitly stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Year of construction: 2007, condition: ready for operation (used), Lhodsyt E D Tepfx Af Sjl

Condition: used, Year of construction: 1973, functionality: fully functional, Offered is a center grinding machine ZS 100 with brand Henninger. The maschine will be sold as used. Lhodpfjwz Ed Djx Af Sol An emergency stop switch has been retrofitted. Machine will be sold without any warranty.

Condition: used, Year of construction: 2001, Technical data: Tool holder: SK 40 Lhodpfx Aot Hr Ahsf Ssl Travels: X-axis: 530 mm Y-axis: 450 mm Z-axis: 450 mm Max. Tool weight: 260 kg Spindle speed: 12000 1/min Max. Table load: 380 kg Weight, approx.: 6500 kg Dimensions (DxWxH), approx.: 2000 x 2200 x 2400 mm Equipment: - Control Heidenhain TNC 430 - 4-axis from SMP (France)

Condition: used, Year of construction: 1998, functionality: fully functional, VMC 600, used. Lodpfxjz Ehnus Af Sshl

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2650207, travel distance X-axis: 300 mm, travel distance Y-axis: 260 mm, travel distance Z-axis: 300 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, controller manufacturer: Siemens, controller model: 828d, total height: 2,360 mm, total length: 2,020 mm, total width: 1,000 mm, table width: 260 mm, table length: 560 mm, table load: 150 kg, rotational speed (max.): 20,000 rpm, overall weight: 2,180 kg, spindle speed (max.): 20,000 rpm, spindle motor power: 5,500 W, spindle nose: BT30, number of spindles: 1, number of slots in tool magazine: 16, tool length: 200 mm, tool diameter: 63 mm, tool weight: 3,000 g, input voltage: 380 V, type of input current: three-phase, Equipment: documentation/manual, SYIL X5 CNC Vertical Machining Center – New Machine Compact CNC vertical machining center, designed for precision machining of single parts as well as for small and medium-sized production runs. Equipment: Schneeberger mineral cast chassis Siemens SINUMERIK 828D CNC control THK linear guides and ball screws BT30 spindle, 20,000 rpm Lhodpfx Asz Eh E Tef Sol 16-tool automatic tool changer Coolant system Automatic centralized lubrication Fully enclosed work enclosure Work area lighting New machine, available in stock, selling price CHF 43,900 (excluding VAT) The machine can be viewed and tested in our showroom in Le Locle, Switzerland. Commissioning, training, and after-sales service are provided directly by Swiss Machines Tools, the SYIL distributor in Switzerland. Please contact us for detailed technical specifications, available equipment, and options.

Condition: good (used), Year of construction: 2021, functionality: fully functional, Matec HV 700, Year of manufacture 2021, Lhodpfx Afsz Dgzds Sol Heidenhain TNC 640 control system, Travel range X/Y/Z 2600/700/950 horizontal, Travel range X/Y/Z 2600/700/950 vertical, 50-position tool changer, HSK 63 tool holder, Spindle speed up to 15,000 rpm, NC swivel milling head +/- 105°, Swivel radius 250 mm, NC rotary table Ø 750 mm, IKZ (internal cooling) 20 bar, Paper band filter, Direct measuring systems, Chip conveyor, Electr. handwheel, Dynamics package, Software Kinematics Option, Measuring probe, Partition, S1 approx. 2000 total spindle hours, S2 approx. 25 total spindle hours.

Condition: used, YEAR 2015 Ljdez Dwqvopfx Af Sshl MANUFACTURER HAAS AUTOMATION INC MODEL VF 5/40 CNC HAAS

Condition: excellent (used), Year of construction: 2015, operating hours: 3,104 h, functionality: fully functional, machine/vehicle number: 11415741834, operating hours of spindle: 1,347 h, Equipment: chip conveyor, documentation/manual, DMG MORI DMU 50 – 5-Axis Machining Center – Excellent Condition – Only 1,347 Spindle Hours For sale is a meticulously maintained DMG MORI DMU 50 5-axis machining center from 2015. The machine was relocated to our facility in June 2026 and subsequently fully commissioned, geometrically measured, and technically inspected by the DMG MORI factory service. During this process, all functions were checked, the machine was realigned, the measuring probe was calibrated, and the kinematics were checked and corrected. Afterwards, a successful test run was performed without any issues. The machine is immediately ready for production. With only 1,347 spindle hours and approximately 3,104 operating hours, the machine is in exceptionally good technical condition. Technical data: • Control system: Siemens SINUMERIK 840D solutionline / CELOS • Spindle speed: 14,000 min⁻¹ • Machine weight: approx. 4,450 kg • Voltage: 400 V / 50 Hz Equipment: • 5-axis machining • Siemens SINUMERIK 840D solutionline / CELOS • Internal cooling (IKZ) • High-pressure coolant system • Chip conveyor • 3D measuring probe • Tool measuring device TT160 • Electronic handwheel • USB interface activated • CELOS user interface Maintenance / Service: DMG MORI Service, July 2026 The following work was carried out by the manufacturer: • Machine realigned • Geometry fully checked • Geometry report created • Measuring probe newly calibrated • Kinematics checked and corrected • Tool measuring device TT160 refurbished • Complete function test performed Lhsdpfsziz S Djx Af Sol • Operator training provided The machine was subsequently fully inspected and approved by DMG MORI.

Condition: ready for operation (used), Year of construction: 2006, CNC machining center DMC 635V Year of manufacture 2006 Heidenhain TNC 530i control Control approx. 58,400 hours Program run approx. 19,980 hours According to the sticker in the control cabinet, the spindle and motor were replaced in January 2019 at 10,660 hours. No documentation available. Machine runs smoothly Travel distances X 635 Lsdpfx Aew Tir Ujf Sshl Y 510 Z 460 Tool holder SK 40 20-position tool changer Table 790×560 with chip conveyor Weight approx. 3700 kg This offer is directed exclusively at commercial enterprises within the meaning of §14 BGB (German Civil Code). No sale to private individuals.