Used Wood Gasifying Boilers for sale (6,697)

Condition: good (used), Year of construction: 1994, power: 30 kW (40.79 HP), Drum chipper with horizontal feed max. feed width: 300 mm Nsdpfx Afou Ezp Ajaola max. feed height: 85 mm motor: 18.5 kW new rotor bearing

Condition: good (used), Slow-speed machine with walking floor Nedpfx Asyu U Spsfajla Rotor width: 1 m Motor: 22 kW

Condition: good (used), Year of construction: 1994, Heating boiler for hot water or steam. Fuel: wood chips. Heating capacity: 6 MW. Up to 120°C, permissible overpressure: 1 bar. Can also be operated with an oil burner as fuel. Dismantling must be carried out by the buyer. Nlodjyiky Aepfx Afasa

Condition: good (used), Year of construction: 2010, Wood gasification system for electricity generation, approx. 50 kW, installed in a 20-foot container. Storage tank approx. 3.5 m in length. Material feed via inclined chain conveyor. Gas engine not included, but can be sourced used or new. Nledeyxv Emopfx Afasa

Condition: good (used), Year of construction: 2008, functionality: fully functional, heating capacity: 50 kW (67.98 HP), Wood chip system with 50 kW heating capacity Nsdpfjv Ngq Aex Afaela already disassembled complete with boiler, stocker unit, and discharge system

Condition: excellent (used), Year of construction: 2020, Powerful hacker or shredder with 45 kW motor, also suitable for plastic. Rotor width: 1000 mm, rotor diameter: 360 mm, approximately 50–60 blades on the rotor. Inclined conveyor belt with magnetic roller available separately. Nlodpow Tdudofx Afaea

Condition: good (used), Year of construction: 1999, Chipper with inclined feed, suitable for roofers and carpenters, ideal for shredding roof battens with nails. Max. feed opening: 400 x 80 mm Slow speed: 250 rpm Motor: 18.5 kW Large rotor diameter Large knives 40 x 40 mm, set diagonally Nledpjxlm Ntsfx Afaea

Condition: good (used), Year of construction: 2013, Heating system for fuel wood (wood chips or logs), capable of generating steam up to 150°C, also suitable for hot water applications. Hydraulic feed allows for use of larger fuel materials. Heating capacity up to 850 kW. Location: Austria. Nodpeyhlrmsfx Afaela

Condition: good (used), Year of construction: 1993, Rotor width 800 mm 22 kw motor 20 knives on rotor 25 mm concave Nsdpfx Aep H Sv Defajla There is also a wooden frame to put the chipper higher so that a conveyor belt fits in below

Condition: good (used), Year of construction: 1995, Chipper with horizontal feed via vibratory chute Motor: 30 kW Max. feed width: 320 mm Max. feed height: 80 mm With conveyor belt Njdpfx Afsxc H Rloasla

Condition: good (used), Year of construction: 2006, Drum chipper, high-speed with horizontal infeed max. infeed width 450 mm max. infeed height 140 mm Motor 75 kw with frequency converter for variable speed no vibrating chute included Nlodpfx Afsu Rl Rusaja

Condition: excellent (used), Year of construction: 1995, operating hours: 9,000 h, functionality: fully functional, power: 206 kW (280.08 HP), overall weight: 9,960 kg, Jenz AZ 35 D/Shredder/Chipper/Crusher • Manufacturer: Jenz • Model: AZ 35D • Year of manufacture: 1995 • Operating hours: 9,000 h • Engine power: 206 kW/280 HP • Rotor width: approx. 800–1000 mm • Rotor diameter: approx. 600–800 mm • Number of knives: approx. 2–4 main knives + counter knives • Hydraulic feed with two feed rollers • Infeed opening: approx. 800 x 600 mm • Conveyor belt length: approx. 3 – 5 meters Nlsdpfx Asy Axurofaja • Logs up to approx. 30–40 cm diameter • Engine: Mercedes Benz • Total weight: 9,960 kg • German machine • Immediately ready for use • This offer is non-binding and subject to change without notice. - Subject to prior sale, - Errors and/or typographical mistakes excepted. - Sale according to our terms and conditions.

Condition: new, Year of construction: 2026, Multifunctional, efficient milling machine, designed for working with stone, manufacturing tombstones but also for wood materials, MDF, plywood, plexiglas. Made of steel and cast iron. Features Rigid device with a precise resolution and full interpolation in each of the X, Y, Z axes Tool height sensor Central lubrication Double vented control panel Strengthened design Water table for material cooling Strengthened guiding rolls - improve inserting and removing workpieces Nlsdpfx Afji Ab Aksaoa Capabilities tombstone manufacturing (all kinds of stones, ceramics, glass, granite, marble, etc.) stone reliefs, engraving, milling, etc. wooden materials, MDF, plexiglas, plywood, etc. Technical data Working area 1300x2500 (1500x3000mm) Z-axis 400 mm (raised gantry) Spindle 5.5 kW flood coolant Inverter 7.5 kW Controller DSP - digital data processing + RichAuto-AutoNow-A11E control Linear guides Hiwin Software Artcam The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. Check our offer on our website.

Condition: used, mileage: 813,285 km, power: 199 kW (270.56 HP), first registration: 04/2007, fuel type: diesel, tire size: 315/70R22,5, axle configuration: 4x2, wheelbase: 5,730 mm, fuel: diesel, color: red, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro4, suspension: steel, total length: 9,900 mm, total width: 2,550 mm, total height: 3,950 mm, loading space length: 7,400 mm, loading space width: 2,450 mm, loading space height: 2,640 mm, Year of construction: 2007, Equipment: ABS, air conditioning, cruise control, electric window regulation, power mirror, tail-lift, traction control, = Additional Options and Equipment = - Heated mirrors - Digital tachograph - Tachograph (control device) - Halogen lamp - Short cab - Tail lift - Manual - Fabric = Notes = Number of axles: 2, Configuration: 4x2, Gross weight: 19,000 kg, Total tank capacity: 300 liters, Suspension type: air suspension, Cab type: short cab, Cruise control, Tachograph (control device), Digital tachograph, Air conditioning, Electric windows, Electric mirrors, Color: red, Heated mirrors, Lighting type: halogen lamp, Speed limiter, Air conditioning, Engine power: 199 kW (267 Hp), Fuel: diesel, Euro: 4, Transmission type: Opti-cruise, Gearbox: Scania, Speed limiter, Gears: 12, Clutch pedal, Power steering, ABS, ASR, Starter battery, Seating configuration: 1+1, Seat covering: fabric, Manual seat adjustment, Tail lift, Tail lift version: rear gate, Tail lift capacity: 2000 kg, Tail lift manufacturer: DHOLLANDIA DHLSU11, Tail lift material: steel, Tail lift size: 175 x 252, Spare wheel, Spare wheel tread: 6 % Njdpfx Afoww T Hlsasla = Further Information = Transmission Transmission: SCA, 12 gears, automatic Axle configuration Tire dimension: 315/70R22.5 Brakes: drum brakes Suspension: leaf suspension Axle 1: tire tread left: 5 mm; tire tread right: 1 mm Axle 2: twin tires; inner left tire tread: 1 mm; outer left tire tread: 5 mm; inner right tire tread: 1 mm; outer right tire tread: 5 mm Weights Gross vehicle weight (GVW): 19,000 kg Functional Tail lift: DHOLLANDIA DHLSU11, rear gate, 2000 kg Loading floor height: 113 cm Condition General condition: average Technical condition: average Optical condition: average Damages: none Number of keys: 1 Identification Registration number: KLEYN1 = Company Information = Kleyn Trucks is one of the world’s largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range covers all European makes, years of manufacture, and price categories. Why buy at Kleyn Trucks? Simple! • Large, fast-rotating inventory • Recognizable quality • Good prices • Professional business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates are quickly arranged • Expert technical services • The security of “recognizable quality” • And more ... Please visit our website for special offers and the complete stock: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Ask directly about our European warranty package.

Condition: used, mileage: 831,685 km, power: 199 kW (270.56 HP), first registration: 04/2007, fuel type: diesel, tire size: 315/80R22,5, axle configuration: 4x2, wheelbase: 5,700 mm, fuel: diesel, color: other, driver cabin: day cab, gearing type: automatic, number of gears: 8, emission class: euro4, suspension: steel, total length: 9,730 mm, total width: 2,550 mm, total height: 3,890 mm, loading space length: 7,410 mm, loading space width: 2,470 mm, loading space height: 2,660 mm, Year of construction: 2007, Equipment: ABS, air conditioning, electric window regulation, seat heater, tail-lift, traction control, = Additional options and accessories = - Heated mirrors - Digital tachograph - Tachograph (control device) - Fixed fifth wheel - Halogen lights - Air conditioning - Short cab - Tail lift - Manual adjustment - Fabric upholstery = Notes = Number of axles: 2, Configuration: 4x2, Twin tires, Gross weight: 19,000 kg, Total tank capacity: 300 liters, Fifth wheel: Fixed, Number of differentials: 1, Suspension type: Air suspension, Cab type: Short cab, Tachograph (control device), Digital tachograph, Electric windows, Color: Multicolor, Heated mirrors, Lighting type: Halogen lamp, Speed limiter, Air conditioning, Seat heating, Engine power: 199 kW (267 Hp), Fuel: Diesel, Euro: 4, Transmission type: Opti-cruise, Gearbox make: Scania, Speed limiter, Gears: 8, Clutch pedal, Power steering, ABS, ASR (anti-slip regulation), Starter battery, Body year: 8, System type: ., Seating configuration: 1+1, Seat cover: Fabric, Seat adjustment: Manual, Tail lift, Tail lift design: Rear tailboard, Tail lift capacity: 2,000 kg, Tail lift manufacturer: Dhollandia, Tail lift material: Steel, Tail lift dimensions: 175 x 252 = Further information = Transmission Gearbox: SCA, 8 gears, automatic Axle configuration Brakes: Drum brakes Suspension: Leaf spring suspension Front axle: Tire size: 315/80R22.5; Left tire tread: 2 mm; Right tire tread: 3 mm Rear axle: Tire size: 315/70R22.5; Twin tires; Left inner tread: 6 mm; Left outer tread: 5 mm; Right inner tread: 4 mm; Right outer tread: 5 mm Weights gvw (gross vehicle weight): 19,000 kg Functional Tail lift: Dhollandia, rear tailboard, 2,000 kg Platform height: 114 cm Condition Overall condition: average Technical condition: average Optical condition: average Damages: none Number of keys: 1 Identification License plate: KLEYN1 = Company information = Kleyn Trucks is one of the world’s largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our offer includes all European brands, years of manufacture, and price ranges. Why buy at Kleyn Trucks? Simple! • Large, rapidly changing inventory • Recognizable quality • Good pricing • Reliable business practices • Multilingual staff • Understanding customer needs • Support with import and transport • (Export) license plates arranged quickly • Expert technical services • The security of "recognizable quality" • And more… Please visit our website for special offers and the full inventory. Nedpfx Asww At Ujfaola Leasing via Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send your inquiry via our website. Ask directly about our European warranty package.

Condition: like new (used), total engine power 2x22KW feed hopper pressure drawer 6039 operating hours shaft length 140 cm auger extractor external dimensions 300x160 cm Njdpfoy Edq Dsx Afasla year 2007

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 2011/67/47, saw blade diameter: 420 mm, input voltage: 400 V, saw blade bore: 40 mm, input current: 6 A, We are offering this very well-maintained GRAULE ZS 170 N mitre and cross-cut saw for aluminium and wood, year of manufacture 2011. Nlodpfx Afey D Nkgeasa

Condition: ready for operation (used), Year of construction: 2018, operating hours: 550 h, functionality: fully functional, power: 16.92 kW (23.00 HP), fuel type: gasoline, We offer you: Chipper – Garden Chipper Eliet Super Prof Max on wheeled chassis Year of manufacture: 2018 520 operating hours Equipped with a powerful 23 HP Vanguard EFI engine Hydraulic wheel drive Hydraulic feed roller with forward & reverse Up to 13 cm branch diameter Folding discharge chute, swivels 280 degrees Electromagnetic engagement of knives 24 knives distributed over 6 discs Feed opening: 500 x 700 mm Approx. 6.5 m³ of chips per hour Noise level: 116 dB(A) Nlsdpfx Afey D I I Reaja Weight: 441 kg The machine is also available for rent.

Condition: repair required (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: 2772, pressure: 12 bar, power: 6,744 kW (9,169.28 HP), Used steam boiler, MAHY TME.25, no. 2772, year 1996. Test pressure 12 barg, operating pressure possible up to 11 barg. The stated price is for the boiler in its current condition, but we can offer various additional options. For example: new insulation, control panel, overhaul and pressure test, burner and accessories, installation, etc. Nledpfxjyu Iqro Afaoa

Condition: used, Year of construction: 1996, functionality: unexamined, machine/vehicle number: 2288, pressure: 10 bar, power: 6,250 kW (8,497.62 HP), Used steam boiler, EMK H10.000 no. 2288, year 1996. Sealing pressure 10 barg, operating pressure possible up to 9 barg. The listed price is for the boiler in its current condition, but we can offer various additional options. Nodeyu Ig Tepfx Afasla Such as: new insulation, control cabinet, overhaul and pressure test, burner and components, installation, ...

Year of construction: 2010, condition: excellent (used), I sell the window prodution sets of tools suitable for CNC window angular profiling centres: VYDONA WOOD EU78-92 Njdpsy D E S Hjfx Afaola VYDONA Wood-Aluminium 92mm Hole 50mm. All complete. Very good condition. Available as a set. Possible to buy also separately.

Condition: like new (used), Year of construction: 2008, functionality: fully functional, operating pressure: 13 bar, operating temperature: 195 °C, empty load weight: 800 kg, JUMAG DG 360 Steam Generator, Made in Germany. Regarded by specialists as the best steam generator in the world. Coil-less design. Equipped with a water jacket. Delivers consistent and smooth steam output, without pressure or temperature fluctuations or surges. Performance – 360 to 400 kg/h. Nlodpfx Afoyfihtsasa The generator features two power ranges: 1st stage up to 200 kg/h; 2nd stage with modulation up to 400 kg/h. Operating pressure from 6 bar up to a maximum of 13 bar. Fuel – oil/gas. Economizer. Automatic or manual blowdown. Complete documentation. Commissioning warranty. Boiler inspected and pressure tested. Demonstration and commissioning available on-site or via video. Equipped with Grundfos feed pump and safety valve. EXCELLENT CONDITION. Serviced by "ZAG" Jumag Switzerland. Complete documentation for UDT (Office of Technical Inspection) registration. All machines offered by us undergo rigorous technical inspections, including pressure tests, safety automation system checks, leak tests, and more. We cooperate with a logistics company that delivers our equipment to clients across Europe and beyond.

Condition: used, Year of construction: 2010, functionality: fully functional, - Brand: Bongard - Model: Cervap 600 / 9 doors - Technology: steam tube - Energy: gas or fuel oil - Configuration: 3 decks - Number of lanes: 3 lanes - Lane width: 600 mm Njdpfoy Duyaex Afaola - Total number of doors: 9 - Usable height per deck: 170 mm - Application: bakery - Application: pastry - Application: viennoiserie - Baking by conduction - Baking by radiation - Annular steam tubes - Refractory stainless steel combustion chamber - Steam generator per deck - Standard control: Ergocom - This is a professional bakery oven from the French brand Bongard. It is a model from the Cervap range.

Condition: used, sanding height 150 mm 390 mm Sanding paper width 400 mm engine tba Nsdpfx Afsyz Dfasajla KED Type XXIII II4 single wood sanding machine for sanding and calibrating solid wood individual parts and smaller workpieces. The machine is suitable for precise sanding work in carpentry and furniture making and enables uniform surface finishing. Its robust construction makes it suitable for continuous use in woodworking.

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 226 h, maximum speed: 80 km/h, overall weight: 1,800 kg, Jensen A425 DI – only 226 original hours!! Price net: €16,499 negotiable gross: €19,575 negotiable Year of manufacture: 2012 First registration: 12/2012 Operating hours: 226 Original paint! Oil change / air filter replacement has been carried out (invoice available) Excellent, like-new condition – see photos Chipper in as-new condition, without DPF or AdBlue Chipping diameter: 200 mm Weight: 1,800 kg Chassis: 80 km/h Upper structure and discharge chute rotatable Hatz diesel engine Nljdpfx Asy Dtyfsfasa Power control / overload protection Standard cut knives Condition as shown in the pictures Documents available (Registration Certificate Part 2 / Registration Certificate Part 1 / valid roadworthiness inspection) Height-adjustable towing drawbar with ball head Sale to businesses/trade/private customers An invoice with VAT shown separately will be issued. Please also check our other offers! Sale without warranty/guarantee or returns and under exclusion of liability for material defects. All specifications, images, and notes do not constitute guaranteed properties and are for general description purposes only. Information is provided to the best of our knowledge but cannot be guaranteed. Offer non-binding. Subject to prior sale, errors, and changes.