Used Wood Eye for sale (19,499)

Condition: excellent (used), CATALOG NUMBER 7769 TECHNICAL DATA - Loading hopper dimension (top, L/W): 650x240 mm - Rotor width: 360 mm - Motor: 7.5 kW - Screen: 8 mm - Knife width: 90 mm Nedpfsxix Szjx Agqodd - Number of knives: 3 rows of 4 pcs - Throughput: approx. 700 kg/h - Extraction outlet diameter: 100 mm - Dimensions (L/W/H): 1200x830x1440 mm - Weight approx.: 300 kg FEATURES – Made in Poland – Unpainted – Mobile – Very good condition – Used chipper Net price: 16,900 PLN Net price: 4,020 EUR (depending on exchange rate 4.2 PLN/EUR) (Prices may change due to exchange rate fluctuations)

Condition: good (used), Year of construction: 2007, functionality: fully functional, power: 7.63 kW (10.37 HP), total width: 2,300 mm, total length: 4,000 mm, total height: 3,000 mm, type of input current: three-phase, pressure: 6 bar, input voltage: 400 V, nominal heat output: 950 kW (1,291.64 HP), operating pressure: 6 bar, Equipment: hot water, type plate available, The Pyrtec boiler system is an underfeed stoker combustion unit with internal grate and burnout grate for universal application, and is suitable for a particularly wide fuel spectrum, ranging from dry wood waste to wet forest wood chips. Maximum water content w= 50%, corresponding to a wood moisture u of 100%. The complete boiler system is type-approved (Approval No.: 02-221-512) with continuous quality control by TÜV and consists of the following components: FEED AUGER WITH BACK-BURN BARRIER LAYER: The feed auger transports the fuel into the combustion chamber and the grate area of the fireblock. The robust auger flights are made from heat-resistant chromium steel in the combustion chamber area. The feed tube is equipped with mounts for the back-burn thermostat and the thermal extinguishing valve. Above the auger is a dosing container with a photoelectric sensor for level control of the fuel barrier layer required by TRD 414. The drive is provided by a maintenance-free helical gear motor and chain drive enclosed in a dust-tight chain guard. Accessoires: Extinguishing valve with dirt strainer COMBUSTION BLOCK: Solid combustion block with multiple layers of insulation and high-quality chamotte lining. The feed and grate area consists of the fire chamber, gasification grate, and descending burnout grate. All of these components are made of highly heat-resistant cast steel (Material No. 1.4868), at least 12 mm thick and individually replaceable. Ndedexwhw Aepfx Agqed This type of primary combustion system has proven to be extremely effective even with challenging fuels (wet sawmill residues, high bark content, etc.). Ash and foreign substances falling through the grates can easily be removed from outside through access holes sealed with covers. The horizontal combustion chamber is optimally shaped for complete burnout and also provides a large ash compartment. The combustion chamber door is heavy-duty, well-insulated, and can be ideally swung aside on a robust double-joint hinge for maintenance purposes. BOILER: Horizontal hot water boiler in three-pass design, mounted on the fireblock, insulated and stylishly clad. The insulated boiler front door is designed to allow the installation of an oil or gas burner. Operating temperature: max. 120 °C Operating pressure: 3.0 bar Test pressure: 6.0 bar FLUE GAS DUST COLLECTOR PYRTEC-140 to PYRTEC-650: Constructed in axial cyclone design, fully insulated and mounted to the boiler. Equipped with two insulated cleaning covers, an ash container with quick-release fastener, and mounting flange for the flue gas fan. FLUE GAS DUST COLLECTOR PYRTEC-1000: Constructed in axial cyclone design, fully insulated, free-standing for optimal placement. Includes two insulated cleaning covers, mounting flange for the flue gas fan, and connection for the ash container. FLUE GAS FAN: Specially designed fan for wood combustion operation, very quiet, with a heavy-duty, heat-resistant motor and flexible heat-dissipating hub. The fan housing can be continuously rotated at the intake, with a round exhaust outlet.

Year of construction: 2023, condition: new, TECHNICAL DESCRIPTION OF AVB-HELIX100BB The size of the log hopper can be adjusted to meet the customer's needs. The hopper dimensions are 230-250 cm in length, 100 cm in width, and 110 cm in height. The cutter heads are designed to be movable for simple operation. The hopper speed is adjustable to control the thickness and amount of shavings produced. It also has a sensitive shaving type for continuous use. The hopper is constructed with heavy-duty steel and has a total weight of 7,000 kg. Its dimensions are 540 cm x 165 cm x 185 cm. The cutter heads are run by two electric motors, each with a power of 37 kW. They operate at 3,000 RPM and are equipped with inverters. The production rate for shavings is between 2,800 and 3,000 kilograms per hour. double hydraulic cylinder to move the log hopper. We offer a cutter head design that is particularly suited for small flake production, with the added benefit of being available for chicken farms. Additionally, we also have a larger flake option that would be suitable for horse stables. Our cutter heads are equipped with T.C.T. carbide blades and designed in a spiral helix type to create mini flakes. We place 400-500 pieces of carbide blade to ensure top-quality wood shavings for animal bedding industries. The size and thickness of the shavings can be easily controlled by adjusting the head RPM and the travel speed of the hopper. Our bearings cups are equipped with high-quality heavy-duty types such as COC, TIMKEN, or SKF. Adding lubrication oil is hassle-free. Our hydraulic motor has 15 KW power with a speed control unit drive. Additionally, we have an anti-jamming system between the plate and the hopper to prevent splinters. Our machine can handle any type of wood, including slabs, about to the shape of the cutter heads. You can also use off-cuts and all types of residues for perfect results. If needed, we can add a pneumatic press to the machine hopper for even better performance. TECHNICAL SPECIFICATIONS AVB-HELIX100BB Number of Cutterheads 2 Operation Length of Cutter Head 100 cm Number of Blades 500 T.C.T / cutter head Power Supply 2 *37 KW = 74 KW( 99,23 HP) Hopper Working Hydraulic Hopper Dimensions mm 2200*1000*1000 Working Voltage 380 V 50-60 Hz Nedpfsnl Efxox Agqodd Conveyor Band Motor 1,5 KW Hydraulic Motor 15 KW Total Power 90,5 KW Cutterhead Speed 3000 rpm Cutterhead Diameter 250 mm Shaving Depth 0,03- 0,5 mm Max.Log Input Length 150-220 cm Max.Log Input Width 10-95 cm Working Distance 2200 mm Machine Dimensions L5400xH1650xW1850 mm Weight 7.000 Kg Production Capacity 3000 kg/h

Year of construction: 2023, condition: as good as new (ex-display), Joy in the forest Krpan CV a dream! KRPAN is the largest manufacturer of forestry winches in the world and also produces log splitters at the highest quality level! We have all models in stock and can deliver immediately. Nodounmwcepfx Agqodd For a detailed description see .pdf data sheet in documents.

Condition: good (used), Year of construction: 2005, functionality: fully functional, Description see above Nodpfx Aexwcxhogqodd

Condition: like new (used), main motor power 15 kW pump motor power 2.2 kW feed hopper 150x80 cm hopper height 160 cm pressure drawer shaft length 700 mm Ndsdpfx Agexv U E Rjqsd year of manufacture 2001 CE marking

Condition: excellent (used), Catalogue number 7259 TECHNICAL DATA - Infeed width: 400 mm - Infeed height: 200 mm - Shaft width: 530 mm - Shaft diameter: 550 mm - Knife length: 530 mm - Number of knives: 2 pcs - Screen dimensions: 50x50 mm - 2 lower toothed feed shafts - Lower shaft motor: 2.2 kW - Upper toothed feed shaft - Upper shaft motor: 2.2 kW - Conveyor belt feeder: 0.55 kW - Feeder belt length: 3000 mm - Feeder belt width: 410 mm - Main motor: 45 kW Ndsdpfxerit Nls Agqsd - Auto-reverse - Reverse operation - Machine dimensions (L/W/H): 2900x1600x1600 mm - Feeder dimensions (L/W/H): 3070x720x670 mm - Weight approx. 3500 kg ADVANTAGES – German manufacture – Auto-reverse (adjustable) – Reverse function – Used shredder in very good condition Net price: 85,900 PLN Net price: 20,450 EUR depending on exchange rate 4.2 EUR (Prices may change with significant exchange rate fluctuations)

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 17091664, fuel: electricity, This is an electric wood chipper with a 30 kW electric motor. It features a system of spiral knives that enable quiet and efficient chipping of wood up to 170 mm in diameter (effective). The wood feed opening measures 210 x 315 mm. It is a low-speed machine. Applications include use as an auxiliary machine for a debarker, in sawmills, for chip preparation in boiler rooms, and anywhere wood chips without fine dust are required. Ndodpfx Aexvykxogqjd

Condition: used, New: Yes Nodpfxsxvx Szj Agqodd Colour: Green

Condition: used, SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC Ndjdewp Rqfopfx Agqsd • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price: 30,000.00 EUR (VAT is not included)

Year of construction: 2018, condition: ready for operation (used), This 4-axis BIESSE Rover S FT 1536 was manufactured in 2018. It features a robust gantry design, a working area of 3765 × 1560 mm, and a main spindle power of 13.2 kW. Equipped with a HSK-F63 tool holder system, 12-position disc-type tool changer, and a BIESSE BH 10 drilling unit with comprehensive vertical and horizontal drilling capabilities. It also includes a grid vacuum table, dual 500 m³/h vacuum pumps, and is DXF file compatible. Contact us for more information about this machine. Application Types CNC Wood Machining Ndjdpfjxtq Ucsx Agqjd

Condition: excellent (used), Year of construction: 2019, operating hours: 3,631 h, color: green, total height: 3,400 mm, total length: 6,850 mm, total width: 2,860 mm, General Information Year of Manufacture: 2019 Applications: Forestry and Land Management Technical Information Nodpfxew Eu Aqj Agqsdd Power: 441 kW (600 HP) Number of cylinders: 6 Engine displacement: 18,100 cc Fuel type: Diesel Drive: Track Unladen weight: 26,700 kg Functional CE marking: yes Condition Technical condition: very good Visual condition: very good

Condition: excellent (used), functionality: fully functional, Vecoplan shredder type 35/8/2 V, M.-Nr. 7472 - 84, 22 kW-30 HP motor, rotor speed 1050 rpm, discharge auger beneath the shredder, electrical control cabinet. Nodpfx Agsxt T Dgoqjdd

Condition: excellent (used), CATALOG NUMBER 7176 TECHNICAL DATA - Loading hopper inlet: 1050x600mm - Outlet for shredded wood: 160mm diameter - Rotor working width: 590mm - Main motor: 18.5kW - Pump motor: 0.75kW - Number of knives: 14 pcs - Knife size: 30x30mm - Screen: 10x12mm - Pressing drawer - Electric auto-reverse - Dimensions (LxWxH): 1900x1200x1530mm - Weight: 990kg ADVANTAGES – Auto-reverse – German manufacturing – Unpainted – Like WEIMA WL4 – Pressing drawer – Very good condition – Used shredder Net price: 48,900 PLN Ndedjp R I Nljpfx Agqod Net price: 11,640 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: new, Various models of wood chippers for private and professional use. The wood chippers feature double feed rollers and a hydraulic reverse function. Condition: New Ndjdpoxvq Axefx Agqsd

Condition: good (used), Year of construction: 1994, Drum chipper, high-speed chipper with horizontal infeed max. infeed width 300 mm max. infeed height 85 mm Motor 18.5 kw frequency-controlled for variable speed without vibrating chute Ndjdpfx Asu Rl Sfsgqjd

Year of construction: 2014, condition: ready for operation (used), Main Drive Number of axis 3 This 3-axis IMA BIMA CUT 145/330 CNC Wood Machining Centre was manufactured in 2014. It features a working range of 3300 mm in the X axis and 1450 mm in the Y axis, with a spindle power of 18 kW. The machine includes a tool magazine with up to 18 positions and a vacuum clamping system for secure workpiece fixation. If you are looking to get high-quality milling capabilities, consider the IMA BIMA CUT 145/330 machine we have for sale. Contact us for more information. Application Types Ndjdpfow Tnn Ijx Agqed CNC Wood Machining

Condition: used, mileage: 813,285 km, power: 199 kW (270.56 HP), first registration: 04/2007, fuel type: diesel, color: red, axle configuration: 4x2, tire size: 315/70R22,5, fuel: diesel, wheelbase: 5,730 mm, driver cabin: day cab, gearing type: automatic, emission class: euro4, suspension: steel, loading space width: 2,450 mm, loading space length: 7,400 mm, loading space height: 2,640 mm, Year of construction: 2007, Equipment: ABS, air conditioning, cruise control, tail-lift, traction control, = Additional Options and Equipment = - Digital tachograph - Electric windows - Electric mirrors - Tachograph (control device) - Short cab - Tail lift = Remarks = Number of axles: 2, Configuration: 4x2, Gross weight: 19,000 kg, Total fuel tank capacity: 300 litres, Suspension type: air suspension, Cab type: short cab, Cruise control, Tachograph (control device), Digital tachograph, Air conditioning, Electric windows, Electric mirrors, Colour: Red, Heated mirrors, Lighting type: Halogen, Speed limiter, Air conditioning, Engine power: 199 kW (267 hp), Fuel: Diesel, Euro standard: Euro 4, Gearbox type: Opti-cruise, Transmission: Scania, Speed limiter, Gears: 12, Clutch pedal, Power steering, ABS, ASR, Starter battery, Seat arrangement: 1+1, Seat material: Fabric, Seat adjustment: Manual, Tail lift, Tail lift type: rear tailgate, Tail lift capacity: 2000 kg, Tail lift manufacturer: DHOLLANDIA DHLSU11, Tail lift material: Steel, Tail lift dimensions: 175 x 252, Spare wheel, Spare wheel tread depth: 6 % = Further Information = Transmission Transmission: SCA, 12-speed, automatic Axle Configuration Tyre size: 315/70R22.5 Brakes: drum brakes Suspension: leaf suspension Axle 1: Tyre profile left: 5 mm; Tyre profile right: 1 mm Axle 2: Twin tyres; Tyre profile left inside: 1 mm; Tyre profile left outside: 5 mm; Tyre profile right inside: 1 mm; Tyre profile right outside: 5 mm Dimensions and Weights gross vehicle weight: 19,000 kg Dimensions (L x W x H): 990 x 255 x 395 cm Functional Tail lift: DHOLLANDIA DHLSU11, rear tailgate, 2000 kg Load floor height: 113 cm Condition General condition: average Technical condition: average Visual condition: average Damages: none Number of keys: 1 Identification Nsdpfx Agsww T Hloqjdd Registration number: KLEYN1 = Company Information = Kleyn Trucks is one of the world’s largest independent dealers in used vehicles. Here you can select from a constantly changing inventory of 1,200 used trucks, tractors, and trailers. Our range includes all European brands, years of manufacture, and price categories. Why buy from Kleyn Trucks? Simple! • Large and rapidly changing stock • Recognisable quality • Competitive pricing • Professional commercial conduct • Multilingual service • Customer-focused approach • Assistance with import and transport • (Export) registration plates issued quickly • Skilled technical services • The security of 'recognisable quality' • And much more… Please visit our website for special offers and the complete inventory: Leasing with Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and send a request via our website. Ask directly about our European warranty packages.

Condition: used, Filter system, extraction unit, clean-air extraction unit SCHUKO type STA + S 140 / 0 / S1 Extraction filter for wood chips, dust extraction, central extraction, bagging unit Fan type S 140 / 0 / S1 Serial no. Year of manufacture 12 / 2004 Nominal air flow 1,451 m³/h Negative pressure 1,398 Pa Filter area 18 m² Extraction connection Ø 140 mm, reduced to Ø 120 mm Air outlet 480 x 480 mm Ndjdpfsr R Ewlsx Agqsd Motor power 1.1 kW Power supply 400 Volt, 50 Hz - Equipped with 24 filter bags (Ø 160 mm, length 1,500 mm) - Mechanical filter cleaning via vibratory motor - 2 discharge pipes at the bottom for dust collection bags, each Ø 500 mm reduced to Ø 300 mm - Dry extinguishing line with C-hose connection, fire department connection in case of filter fire - Differential pressure switch for filter contamination detection - Without control system (no control system present) - Mounted on 4 steel pipe legs (square tube 40x40 mm) Overall height as shown in pictures: 3,050 mm Space requirement L x W: 1,850 x 1,000 mm Weight approx. 400 kg Very good condition Ideal for wood dust, wood chips, plastic dust or plastic chips.

Condition: excellent (used), CATALOG NUMBER 7611 Technical specifications: - Inlet dimensions: 460x180mm - Outlet diameter: 300mm - Shaft width: 550mm - Shaft diameter: 350mm - Number of knives: 10 pcs - Knives arranged in 2 rows - Autoreverse function - Knife setting device - Sieve diameter: 30mm - Feeding conveyor from top and bottom - Bottom pull shaft Ndodpfx Agsv Ublfeqed - Feeding conveyor length: 4400mm - Main motor: 37kW - Upper feed motor: 1.5kW - Lower feed motor: 2.2kW - Dimensions (L/W/H): 6100x1150x1000mm - Weight approx: 3500kg ADVANTAGES – German-made – Autoreverse function – Feeding conveyor from top and bottom – Knife setting device – Very good condition – Used shredder Net price: 98,900 PLN Net price: 23,550 EUR Net price calculated at 4.2 PLN/EUR (Price may change with significant currency fluctuations)

Condition: new, Year of construction: 2025, functionality: fully functional, SCHORR Log Splitter HS-22PE PRO – 22 Tons Splitting Force -- 22 t splitting force – effortless splitting of hardwood and large logs -- Heavy-duty construction (340 kg) – robust hydraulics and stable steel frame -- Combination drive: PTO and 400V electric motor – flexible use in the forest or on the farm Nsdpfxsw Smphe Agqsdd -- Splitting length up to 110 cm – ideal for long log sections -- Practical log lifter – lifts heavy logs and functions as a safety guard -- Retractable cylinder (1.99 m) – easy to transport and space-saving storage -- 3-point hitch (Cat. I & II) – transport directly on the tractor -- Two-handed operation and safety features – maximum work safety -- Mobile thanks to wheels and transport wheel Performance and Flexibility The HS-22PE impresses with powerful hydraulics and reliable continuous operation. Thanks to PTO and 400V electric motor, you have the choice: mobile operation on the tractor or quiet, emission-free operation on the farm. Comfort and Efficiency -- Log lifter for handling heavy timber – no strenuous manual lifting -- Automatic or manual return for fast or precise working -- Two speeds – rapid approach, powerful splitting Robust Construction With high-strength steel, durable hydraulic components, and stable footing, the HS-22PE is built for tough use. The large transport wheels make moving easy, even on uneven terrain. Technical Data Manufacturer (Short Name): SCHORR -- Model designation: HS-22PE -- Splitting force: 22 tons -- Own weight: 340 kg -- Drive: Electric (400V 5.5 kW, 16A) or PTO (540 rpm) Basic Dimensions -- Overall length: 1300 mm -- Overall width: 1450 mm -- Overall height: 2470 mm -- Hydraulic cylinder diameter: 11.5 cm -- Piston rod diameter: 6 cm -- Splitting wedge length: 22 cm -- Max. / Min. splitting diameter: 40 cm / 8 cm -- Distance between wedge & ground: 16 cm Speed -- Cylinder speed PTO: Advance 5.5 s / Return 9.5 s -- Cylinder speed electric motor: Advance 7.5 s / Return 14.5 s Service and Delivery -- Spare parts always in stock -- Delivery or collection in 48465 Schüttorf possible (by appointment only) -- Financing and leasing available on request We are happy to offer you personal advice on the SCHORR HS-22PE PRO.

Condition: good (used), Year of construction: 2006, Drum chipper, high-speed with horizontal infeed max. infeed width 450 mm max. infeed height 140 mm Motor 75 kw Ndodpfeu Rl Rusx Agqsd with frequency converter for variable speed no vibrating chute included

Condition: new, Year of construction: 2025, functionality: fully functional, SCHORR Wood Splitter 30t HS-30PE PRO With a splitting force of 30 tons, the SCHORR HS-30PE handles even the toughest wood and large logs with ease. Its heavy-duty design (own weight 390 kg), low-wear hydraulic system, and high-strength steel frame ensure a long service life, ultimate stability, and reliable operation—even in continuous use. Nsdpfx Ajw R N Hmogqodd Combined Drive: PTO & Electric Motor The HS-30PE can be operated either via PTO (540 rpm) or the integrated 400V electric motor. This offers maximum flexibility: mobile operation in the forest with a tractor, or emission- and noise-free at the yard. Robust Design—Engineered for Heavy-Duty Use The construction features high-strength steel components and a stable splitting wedge guide. Sturdy support legs provide firm footing, and large transport wheels ensure easy relocation—even on uneven terrain. Splitting Length up to 110 cm Even long trunk sections are processed with ease. The solid splitting blade made of tool steel guarantees a precise splitting line and minimal wear. Integrated Timber Lifter—More Comfort & Safety The timber lifter allows easy, effortless positioning of heavy logs and also acts as a protective guard—greatly simplifying everyday work. Two Return Modes & Speed Settings -- Automatic Return: The splitting wedge automatically returns to the preset position—ideal for fast operation. -- Manual Return: For precise splitting, particularly with irregular wood. In addition, there is a fast advance mode and a slow, high-power mode for actual splitting. Practical Features for Everyday Use -- Lowerable cylinder (down to 1.99 m) for easy transport and space-saving storage -- Two-handed safety operation for maximum protection -- 3-point hitch (Cat. I & II) for convenient tractor transport Technical Data -- Manufacturer: SCHORR -- Model: HS-30PE -- Splitting force: 30 t -- Weight: 390 kg -- Drive: 400V electric motor (5.5 kW, 16A) or PTO Dimensions: -- Length: 1550 mm -- Width: 1150 mm -- Height: 2500 mm (lowered 1990 mm) -- Hydraulic cylinder: Ø 13.8 cm -- Piston rod: Ø 7 cm -- Splitting wedge: 26 cm -- Log diameter: max. 40 cm / min. 8 cm -- Wedge-ground clearance: 16 cm Speed: -- PTO: Forward 5.5 s / Return 9.5 s -- Electric: Forward 7.5 s / Return 14.5 s Your Advantages at a Glance -- Ready for immediate use—no long waiting times -- Heavy-duty design—390 kg net weight for maximum stability -- Flexible operation—tractor or 400V connection -- Convenient timber lifter for handling heavy logs -- Spare parts always available -- Professional service & support Whether delivery or collection in 48465 Schüttorf—we offer the right solution.

Condition: new, Year of construction: 2025, SCHORR Log Splitter HS-30PE PRO – 30 Tons Splitting Force -- 30 t splitting force – effortless splitting of hardwood and large logs -- Heavy-duty construction (390 kg) – robust hydraulics and durable steel frame -- Dual drive: PTO and 400V electric motor – flexible use in the forest or at the yard -- Splitting length up to 110 cm – ideal for long log sections -- Practical log lifter – combines lifting heavy logs and a safety guard -- Retractable cylinder (1.99 m) – easy transport and space-saving storage -- 3-point linkage (Cat. I & II) – transport directly with the tractor -- Two-handed operation and safety features – maximum workplace safety -- Mobile thanks to wheels and transport wheel Performance and Flexibility The HS-30PE impresses with powerful hydraulics and reliable continuous operation. With both PTO and 400V electric motor, you have the choice: mobile with the tractor or quiet and emission-free at the farm. Convenience and Efficiency -- Log lifter for heavy timber – eliminates strenuous manual lifting -- Automatic or manual return for fast or precise operation -- Two speeds – rapid approach, powerful splitting Robust Construction Made from high-strength steel with long-lasting hydraulic components and a stable base, the HS-30PE is built for tough use. Large transport wheels make repositioning easy, even on rough terrain. Technical Data Manufacturer (Short name): SCHORR -- Model code: HS-30PE -- Splitting force: 30 tons -- Own weight: 390 kg -- Drive: Electric (400V 5.5 kW, 16A) or PTO (540 rpm) Key Dimensions -- Overall length: 1550 mm -- Overall width: 1150 mm -- Overall height: 2500 mm -- Hydraulic cylinder diameter: 13.8 cm -- Piston rod diameter: 7 cm -- Wedge length: 26 cm -- Max. / Min. log diameter: 40 cm / 8 cm -- Distance between wedge & ground: 16 cm Njdpfx Aow R Dicsgqedd Speed -- Cylinder speed PTO: Forward 5.5 s / Return 9.5 s -- Cylinder speed Electric motor: Forward 7.5 s / Return 14.5 s Service and Delivery -- Spare parts always in stock -- Delivery or pick-up in 48465 Schüttorf by appointment only -- Financing and leasing available upon request We are happy to provide personal advice regarding the SCHORR HS-30PE PRO.

Condition: new, Year of construction: 2025, functionality: fully functional, SCHORR Log Splitter 22t HS-22P PRO With a splitting force of 22 tonnes, the 22t HS-22P PRO handles even the toughest wood and thick logs effortlessly. Its robust construction (290 kg net weight), low-wear hydraulic system, and high-strength steel frame ensure long service life, maximum stability, and reliable performance – even during continuous operation. PTO Drive – Direct Connection to Tractor Thanks to its PTO (power take-off) drive, the HS-22P can be directly connected to the tractor. This gives it outstanding mobility and independence from external power sources – ideal for use in the forest, on meadows, or around the farm. The splitter operates with stable power transmission and a powerful hydraulic pump, enabling fast splitting cycles. Nedjw Smm Tjpfx Agqsdd Durable Construction – Built for Heavy-Duty Use The design features high-strength steel components and a stable splitting wedge guide. Solid support feet provide a firm base, while large transport wheels allow for easy relocation – even on uneven terrain. Splitting Length up to 110 cm Long logs can be processed with ease. The heavy-duty splitting blade made from tool steel ensures a precise split line and minimal wear. Integrated Log Lifter – Enhanced Comfort & Safety The log lifter allows heavy logs to be raised effortlessly and also serves as a protective guard – greatly simplifying everyday work. Two Return Modes & Speed Levels -- Automatic return: The splitting wedge automatically returns to the preset position – ideal for rapid work cycles. -- Manual return: For precise splitting, especially when processing irregular wood. Additionally, a fast mode for approach and a slow, high-power mode for splitting are available. Practical Features for Daily Use -- Lowerable cylinder (down to 1.99 m) for easy transport and space-saving storage -- Two-hand safety operation for maximum protection -- Three-point hitch (Cat. I & II) for convenient tractor transport Technical Data -- Manufacturer: SCHORR -- Model: HS-22P -- Splitting force: 30 t -- Weight: 370 kg -- Drive: PTO (540 rpm) Dimensions: -- Length: 1300 mm -- Width: 1450 mm -- Height: 2470 mm (lowered 1990 mm) -- Hydraulic cylinder: Ø 11.5 cm -- Piston rod: Ø 6 cm -- Splitting wedge: 22 cm -- Splitting diameter: max. 35 cm / min. 8 cm -- Wedge-to-ground gap: 20 cm Speed: -- PTO: Forward 8.0 s / Return 9.0 s Your Advantages at a Glance -- Ready to use immediately – no long waiting times -- Solid construction – 290 kg net weight for maximum stability -- Flexible operation with tractor -- Convenient log lifter for heavy timber -- Spare parts always available -- Expert service & advice Whether delivery or collection in 48465 Schüttorf – we provide the right solution.