Used Wood Eye for sale (8,554)

Condition: used, Year of construction: 2008, Wood chip heating system with 100 kW heating output. Feed screw (as seen from the front) on the left. Ash container on the right. With discharge system for a room diameter of 6 m. Already dismantled. Becoming available due to connection to district heating. Loading onto truck included. Gsdpfx Anoyalblokoub

Condition: good (used), Year of construction: 1994, power: 30 kW (40.79 HP), Drum chipper with horizontal feed max. feed width: 300 mm Gusdpfx Aou Ezp Asnkjb max. feed height: 85 mm motor: 18.5 kW new rotor bearing

Condition: good (used), Year of construction: 2008, functionality: fully functional, heating capacity: 50 kW (67.98 HP), Wood chip system with 50 kW heating capacity Gjdpfx Anev Ngq Aeksub already disassembled complete with boiler, stocker unit, and discharge system

Condition: good (used), Slow-speed machine with walking floor Rotor width: 1 m Motor: 22 kW Gedpfx Asyu U Spsnkjub

Condition: excellent (used), Year of construction: 2020, Powerful hacker or shredder with 45 kW motor, also suitable for plastic. Rotor width: 1000 mm, rotor diameter: 360 mm, approximately 50–60 blades on the rotor. Inclined conveyor belt with magnetic roller available separately. Guedpjw Tdudofx Ankeb

Condition: good (used), Year of construction: 1999, Chipper with inclined feed, suitable for roofers and carpenters, ideal for shredding roof battens with nails. Max. feed opening: 400 x 80 mm Slow speed: 250 rpm Gusdpfx Asxlm Ntenkeb Motor: 18.5 kW Large rotor diameter Large knives 40 x 40 mm, set diagonally

Condition: good (used), Year of construction: 2013, Heating system for wood fuel (wood chips or logs), can generate steam up to 150°C, but is also suitable for hot water. Hydraulic feed, therefore larger fuel material can also be used. Heating capacity up to 850 kW, but can also deliver up to 1 MW thermal output. The unit is currently in storage. Gujdpfx Asyhlrmsnkjb

Condition: good (used), Year of construction: 2010, Wood gasification system for electricity generation, approx. 50 kW, installed in a 20-foot container. Storage tank approx. 3.5 m in length. Material feed via inclined chain conveyor. Gas engine not included, but can be sourced used or new. Gusdpfx Aoyxv Emsnkob

Condition: good (used), Year of construction: 1995, Chipper with horizontal feed via vibratory chute Motor: 30 kW Godpoxc H Rlofx Ankjub Max. feed width: 320 mm Max. feed height: 80 mm With conveyor belt

Condition: good (used), Year of construction: 1993, Rotor width 800 mm 22 kw motor 20 knives on rotor 25 mm concave There is also a wooden frame to put the chipper higher so that a conveyor belt fits in below Guodpfxep H Sv De Ankjb

Condition: good (used), Year of construction: 2013, Wood chip boiler for steam up to 150 degrees or for water only with hydraulic feed system maximum thermal output up to 850 kW Gsdpey Dfd Njfx Anksub suitable for dry material

Condition: good (used), Year of construction: 2006, Drum chipper, high-speed with horizontal infeed max. infeed width 450 mm max. infeed height 140 mm Motor 75 kw with frequency converter for variable speed no vibrating chute included Guedpfx Ansu Rl Rujkeb

Condition: new, Year of construction: 2026, Multifunctional, efficient milling machine, designed for working with stone, manufacturing tombstones but also for wood materials, MDF, plywood, plexiglas. Made of steel and cast iron. Features Rigid device with a precise resolution and full interpolation in each of the X, Y, Z axes Tool height sensor Central lubrication Guedpei Ab Aksfx Ankob Double vented control panel Strengthened design Water table for material cooling Strengthened guiding rolls - improve inserting and removing workpieces Capabilities tombstone manufacturing (all kinds of stones, ceramics, glass, granite, marble, etc.) stone reliefs, engraving, milling, etc. wooden materials, MDF, plexiglas, plywood, etc. Technical data Working area 1300x2500 (1500x3000mm) Z-axis 400 mm (raised gantry) Spindle 5.5 kW flood coolant Inverter 7.5 kW Controller DSP - digital data processing + RichAuto-AutoNow-A11E control Linear guides Hiwin Software Artcam The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. Check our offer on our website.

Condition: like new (used), total engine power 2x22KW Godey Edq Depfx Ankjub feed hopper pressure drawer 6039 operating hours shaft length 140 cm auger extractor external dimensions 300x160 cm year 2007

Condition: used, sanding height 150 mm 390 mm Gujdpfjyz Dfaex Ankjb Sanding paper width 400 mm engine tba KED Type XXIII II4 single wood sanding machine for sanding and calibrating solid wood individual parts and smaller workpieces. The machine is suitable for precise sanding work in carpentry and furniture making and enables uniform surface finishing. Its robust construction makes it suitable for continuous use in woodworking.

Condition: new, Advantages BOVER_BASIC intelligent control system Power set (electric motor, reduction gear and belt transmission) Filling hopper Hydraulic pressure unit Robust and adjustable Hardened knives with four cutting edges with an extended service life Hardened cleaning knives Hardened cutting racks HARDOX sieve The engine start-up is controlled by the star/triangle system Basic characteristics FILLING HOLE (mm): 1445 × 1345 ROTOR WORKING LENGTH (mm): 650 ROTOR DIAMETER (mm): 270 SIEVE HOLE DIAMETER (mm): 14 Gusdpfx Anehbdg Uokob CAPACITY (m3/h): 3 – 5* POWER (kW): 22 WEIGHT (kg): 1750 * Depending on the material and diameter of openings in the sieve OPTIONS on request: Adjustable sieve rails Suction sink with Ø160 mm attachment Screw/snail conveyor (price for 1 meter) Hi-Lo "TURBO" hydraulic power unit Customized hopper Bover Premium with remote access Additional Sieve/Screen Heavy-duty gearbox (22/30 kW) Secondary cutting blade HARDOX toothed strip on pusher rack Hydraulic oil cooler system Ethernet PLC plug-in Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 2011/67/47, saw blade diameter: 420 mm, input voltage: 400 V, saw blade bore: 40 mm, input current: 6 A, We are offering this very well-maintained GRAULE ZS 170 N mitre and cross-cut saw for aluminium and wood, year of manufacture 2011. Gedsy D Nkgspfx Anksub

Condition: good (used), Year of construction: 1992, Single-piece sanding machine sanding from top and bottom electric height adjustment with digital display continuously variable feed speed star/delta starter pneumatic belt tensioning main switch sanding belt oscillation finishing brush unit top and bottom, manual height adjustment Working width: 190 mm Working height: 4 - 150 mm Min. workpiece length: approx. 280 mm Abrasive belt dimensions (L x W): 1850 x 200 mm Feed speed: 5 - 25 m/min Installed power: approx. 14 kW Extraction port diameter: 2 x 180 mm Dimensions (L x W x H): 2000 x 1000 x 2050 mm Weight: approx. 1800 kg Incl. infeed and outfeed roller conveyor (L = 1600 mm, non-driven) Note on used machines: Gujdpfx Anjwyda Usksb • Technical data subject to errors and prior sale. • Quoted prices are ex-works – loaded free of charge! • The machines have been cleaned and function-tested. • All machines are sold as inspected, with no claims to warranty. Buyers are welcome to inspect machines at the location. • Special agreements are only valid in written form. (We answer inquiries only when your address and telephone number are provided!)

Condition: ready for operation (used), Year of construction: 2018, operating hours: 550 h, functionality: fully functional, power: 16.92 kW (23.00 HP), fuel type: gasoline, We offer you: Chipper – Garden Chipper Eliet Super Prof Max on wheeled chassis Year of manufacture: 2018 520 operating hours Equipped with a powerful 23 HP Vanguard EFI engine Hydraulic wheel drive Hydraulic feed roller with forward & reverse Up to 13 cm branch diameter Folding discharge chute, swivels 280 degrees Electromagnetic engagement of knives Gsdpfjy D I I Rjx Ankeub 24 knives distributed over 6 discs Feed opening: 500 x 700 mm Approx. 6.5 m³ of chips per hour Noise level: 116 dB(A) Weight: 441 kg The machine is also available for rent.

Year of construction: 2010, condition: excellent (used), I sell the window prodution sets of tools suitable for CNC window angular profiling centres: VYDONA WOOD EU78-92 VYDONA Wood-Aluminium 92mm Hole 50mm. All complete. Very good condition. Gedpfx Aney D E S Hjkjub Available as a set. Possible to buy also separately.

Condition: excellent (used), Year of construction: 2007, Wood Cheaper for sale ! Manufacturer - BRUKS KLOCKNER Model - BK -DH 700X100 L Power - 2x500 kw el. motors Entry - 700x100 mm Number of knives - 6 Weight - 46 tons Equipment consits : Gedsyzfigepfx Ankjub - Input transporter 10 m - Metal detector - Cheaper - Output transporter - El. Cabinet - Comand pult

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 226 h, maximum speed: 80 km/h, overall weight: 1,800 kg, Jensen A425 DI – only 226 original hours!! Price net: €16,499 negotiable gross: €19,575 negotiable Year of manufacture: 2012 First registration: 12/2012 Operating hours: 226 Original paint! Oil change / air filter replacement has been carried out (invoice available) Excellent, like-new condition – see photos Chipper in as-new condition, without DPF or AdBlue Chipping diameter: 200 mm Weight: 1,800 kg Chassis: 80 km/h Upper structure and discharge chute rotatable Hatz diesel engine Power control / overload protection Standard cut knives Condition as shown in the pictures Documents available (Registration Certificate Part 2 / Registration Certificate Part 1 / valid roadworthiness inspection) Height-adjustable towing drawbar with ball head Sale to businesses/trade/private customers Gedpjy Dtyfofx Ankoub An invoice with VAT shown separately will be issued. Please also check our other offers! Sale without warranty/guarantee or returns and under exclusion of liability for material defects. All specifications, images, and notes do not constitute guaranteed properties and are for general description purposes only. Information is provided to the best of our knowledge but cannot be guaranteed. Offer non-binding. Subject to prior sale, errors, and changes.

Condition: used, Wood chip discharge hoppers with auger Godpey Dtqkofx Ankeub

Condition: excellent (used), Year of construction: 2004, power: 300 kW (407.89 HP), Wood Chipping Plant BRUKS BK-RH485 – Year of Manufacture 2004 For sale is a high-performance wood chipping plant, BRUKS BK-RH485, ideal for industrial wood chip production. The system is in good working condition and has been regularly serviced. Technical Data Model: BRUKS BK-RH485 Max. Log Diameter: 485 mm Min. Infeed Length: 1,500 mm Max. Infeed Length: 5,500 mm Rotor Disk Drive Power: 315 kW Chip Length: approx. 25 mm Capacity: 80–100 m³/h Operating Hours: approx. 12,500 Year of Manufacture / Commissioning: 2004 System No.: H4224653 Features & Components - Step Separator (Feeding step separator) Gujdpfxey Dr D Ns Ankjb - Feed Belt - Metal Separator / Metal Detector - 2x Discharge Screws (BRUKS): - 600 × 6,500 mm - 800 × 9,500 mm - Control Cabinet / Control Units Description The BRUKS BK-RH485 is designed for high throughput and heavy-duty industrial applications. Thanks to its robust construction and powerful drive system, it is ideally suited for the production of homogeneous wood chips. Integrated metal separation and reliable feed technology ensure safe and efficient operation.

Condition: used, -12 loading mouths/openings -4 decks -Integrated loader elevator -Operates on wood and gas -Sold with gas burner -With mechanical control Guodpjx Up Nwjfx Ankeb -Voltage: 400V