Used Wood Dust for sale (40,624)

Condition: new, Year of construction: 2025, Clean Air Dust Extractor: RLA 140 For wood dust and shavings, designed for commercial use Item number: 5131400 Brand: Holzkraft DESCRIPTION Dust-tested according to H3, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic shavings High extraction performance with minimal space requirements Maximum performance in this class Very quiet All models with collision protection Area of application Designed for commercial use For all woodworking machines with the appropriate extraction nozzle diameter High-quality, well-thought-out design Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right, allowing for flexible use Large inspection openings Large, mobile chip container with clamp and chip collection bag Dust extractor already installed upon delivery Fully assembled, allowing for quick deployment. All models are mobile. Model RLA 210: Optimal chip distribution into the chip containers due to the large filter surface. Filter Description Ultra-compact with maximum filter surface. Filter material made of aluminum-coated polyester fleece, thus offering a long service life. Filter tested and approved as standard in antistatic design according to category M-BIA. The fan is installed downstream of the filter. TECHNICAL DATA Dimensions and Weights Length (product) approx. 1241 mm Width/Depth (product) approx. 830 mm Height (product) approx. 1750 mm Net weight approx. 210 kg Chip collection volume 165 l Nominal diameter of the extraction nozzle inlet: 140 mm Axis of the extraction nozzle to the floor: 850 mm Electrical Data Supply voltage: 400 V Ljdpfx Ajv Sk Tmsb Uoah Mains frequency: 50 Hz Efficiency class of the extraction motor IE3 Drive motor power: 2.2 kW Filter Filter area: 8.5 m² Residual dust content: < 0.1 mg/m³ Manual filter cleaning Noise emission Max. sound pressure level: 71 dB(A) Flow rate Nominal flow rate: 1108 m³/h Max. flow rate: 1750 m³/h SCOPE OF DELIVERY Metal fan impeller Inspection opening for cleaning the bypass filter 5 m connection cable with 5-pin CEE plug and phase inverter Two fixed and two swivel casters with parking brake Manual cleaning

Year of construction: 2001, condition: ready for operation (used), This HEESEMANN BÜRKLE wood production line was manufactured in 2001. It features a comprehensive oil application line, including RBO vacuum feeding Tornado SC 1300, HEESEMANN MFA 8 with cross-lengthwise brushes, and BÜRKLE SLC 1400 roller application machines. Enhanced with a new Siemens control system in 2024, consider the opportunity to buy this HEESEMANN BÜRKLE wood production line. Contact us for more information. Lsdjxnr Hpepfx Ab Uoah Application Types Complete Production

Condition: good (used), Year of construction: 2012, In good condition, chipper Heinola HEINOLA 910 ES with Cummins engine (550 hp) Rotor diameter 900 mm Opening width 1000 mm Opening height 720 mm or quick-change knives 2 pcs Central lubrication Ledew Amrrepfx Ab Ueah - Chipped log diameter 60 cm (for softwood) - Chipped log diameter 45 cm (for hardwood) - Productivity up to 250 m3/h Chipper engine hours after full engine overhaul 2100 Forklift - Kesla 2012T with large cabin Car- Volvo FM 64R 6x4 375 kW -

Condition: ready for operation (used), Overall dimensions: 2500 x 6000 mm Cyclone diameter: 2500 mm Cyclone height: 6000 mm Laedewfrl Aopfx Ab Uoh

Condition: excellent (used), Catalogue number 7672 TECHNICAL DATA - Inlet of loading hopper: 1200x1000 mm - Outlet for shredded wood: Ø160 mm - Working width of rotor: 980 mm - Main motor: 18.5 kW - Number of knives: 24 pcs - Knife dimensions: 30x30 mm - Screen: 20 mm - Pressure drawer - Electric auto-reverse - Dimensions (L/W/H): 2500x1700x1850 mm - Weight: approx. 2,500 kg ADVANTAGES Laodpfx Abowrpv Ee Uoh – German manufacture – Auto-reverse – Pressure drawer – Very good condition – Used chipper Net price: 85,900 PLN Net price: 20,210 EUR at 4.25 EUR exchange rate (Prices may change with larger fluctuations)

Condition: used, No. 04491 Mobile extraction unit / Mobile dust extractor ESTA Dustomat HMS 10 WN Used For extracting wood dust and chips Filter type H2 for wood dust, residual dust content level 2, 0.2 mg/m3 Type 1, for extracting combustible dusts of dust explosion classes St 1 and St 2 400 V, 1.1 kW, with power cable and plug Nominal air volume flow 720 m3/h Filter area 3.5 m2 Extraction pipe connection diameter 100 mm Filter cleaning by hand crank Chip container 670 x 460 mm Mobile unit CE-compliant Transport dimensions approx. 1300 x 550 x 1700 mm LWH Weight approx. 100 kg Lsdjxnqauepfx Ab Usah To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: as good as new (ex-display), Year of construction: 2025, Technical data POWER UNIT 200 P - Intake nozzle Ø: 200 mm Lsdpjbpg Ncefx Ab Uoah - nominal motor power: 2,9 kW; 400 V/50 Hz - max. volume flow: 3010 m³/h - nominal volume flow: 2262 m³/h - negative pressure: 2174 Pa - filter surface: 13,7 m² - filter cleaning: Compressed air cleaning - 2 pcs. filling container (roll container): a. 241 litres - Dimensions ( L x W x H ): 2322 x 830 x 2050 - weight: 320 kg - Execution / operating side alternatively right / left Location ex stock Bitburg Top price for the exhibition piece

Year of construction: 2003, condition: ready for operation (used), Main Drive Spindle speed range 1500–18000 Tool taper HSK F63 Number of axis 4 Tools Max weight 6 kg Max tool length 200 mm Lsdpfx Abjxnr H As Ujah This 4-axis HOMAG PROFI BAZ20/30/16/V/D was manufactured in 2003. It features a Homatic CNC control, WOODWOP CNC programming, an 18-position disk changer, and a main spindle with a 12 kW three-phase motor. Capable of handling workpieces up to 3000 mm in length and 1400 mm in width, it includes a continuous table with adjustable vacuum clamps. Consider the opportunity to buy this HOMAG PROFI BAZ20/30/16/V/D CNC Wood Machining Centre. Contact us for more information. Application Types CNC Wood Machining

Condition: used, Year of construction: 2009, type of input current: three-phase, overall weight: 200 kg, suction capacity: 2,000 m³/h, filter area: 10 m², negative pressure: 2,300 Pa, Equipment: documentation/manual, Dust extractor, welding fume extractor, self-cleaning cartridge filter, pneumatic, vacuum for sandblasting, soda blasting, shot blasting and for all types of dry dust. Brand: Pionier Model: Entstauber PF-2B The filter is cleaned with compressed air pulses during operation, ensuring high device efficiency. Fan located on the clean side, minimizing explosion risk. Laedpfxsxnmw Ne Ab Ush Specifications: Capacity: 2000 m3/h Vacuum: 2300 Pa Filter surface area: 10 m2 Cartridge filter element. Motor power: 1.5 kW Inlet diameter: 180 mm HEPA filter, filtration class H13 Year of manufacture: 2009 Stock number: 1057

Condition: used, Year of construction: 1988, functionality: fully functional, For sale: Used, fully functional shredder, chipper, wood shredding machine Untha RS 30-4-S Technical specifications: 4-shaft cutting system Rotor width: 450 mm Cutting chamber opening: 450 x 560 mm Screen hole diameter: 15 mm 2 motors, each 5.5 kW Weight approx. 1200 kg L/W/H approx. 125/125/200 cm Lodpfxsxpydlo Ab Ueah The shredder is operational and can be tested on site. Self-collection only. This is a private sale; therefore, no warranty, guarantee, or returns.

Condition: excellent (used), CATALOGUE NUMBER 7191 TECHNICAL DATA - loading hopper inlet: 870 x 735 mm - rotor working width: 720 mm - main motor: 18.5 kW - pump motor approx. 0.75 kW - number of knives: 17 pcs - knife dimensions: 80 x 40 mm Ljdsudv Nfopfx Ab Ueah - screen: 20 mm - pressure drawer - electric auto-reverse - outlet for shredded wood: Ø 250 mm - dimensions (L/W/H): 2000 x 1350 x 1370 mm - weight: 1586 kg ADVANTAGES – pressure drawer – very good condition – used shredder Net price: 38,900 PLN Net price: 9,160 EUR at a rate of 4.25 EUR (Prices may change with greater fluctuations)

Condition: used, No. 04489 Mobile extraction unit / Mobile dust extractor ESTA Dustomat 61 Used For extracting wood dust and chips Filter type H2 for wood dust, residual dust content level 2, 0.2 mg/m3 Type 1, for extracting combustible dusts in zone 22 400 V, 3 kW, with power cable and plug Nominal air volume flow 1850 m3/h Extraction pipe connection diameter 160 mm Filter surface area 9.6 m2 Lasdexnprcspfx Ab Ujh Filter cleaning by hand crank Filter dimensions approx. 720 x 510 mm Chip container 860 x 570 mm Mobile unit CE-compliant Including new replacement filter Operating instructions available Transport dimensions approx. 1700 x 800 x 2100 mm LWH Weight approx. 250 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: excellent (used), Year of construction: 2017, Weima Wood Shredder - Walking Floor Shredder - Low-Noise and Slow-Running Top condition - only 150 operating hours - Lajdpfxsxiq Sys Ab Ueh Type: WL 600 Shaft diameter (mm): 260 Knife length (mm): 600 Knife shaft speed (rpm): 80 - 125 Number of knives (pcs): 14 Max. granulate size (mm): 20/25 Opening (mm): 600 x 800 Extraction port diameter (mm): 160 Motor power (kW): 15 Voltage (V): 400 Working height (mm): 1645 L x W x H (mm): 1,805 x 1,118 x 1,645 Weight (kg): 1,100 Location: ex-stock 54634 Bitburg - available immediately - Subject to prior sale

Condition: used, COMPLETE WORKSHOP IN EXISTING CONDITION DECHAU CHAMBON Planer CHAMBON Surface planer CHAMBON 2 spindle moulders CHAMBON with power feeder Chip conveyor Radial arm saw LYON FLEX Frame press UTIS Tenoner CONCEPT4 (saw, 2 feeders, spindle moulders) Ljdpfx Aboxpw Rpj Uoah

Year of construction: 2021, condition: ready for operation (used), Main Drive Spindle speed range 24000 rpm Spindle motor power 12 KW Tool taper HSK F63 Number of axis 3 Movement X-Axis Movement 3500 mm Y-Axis Movement 950 mm Z-Axis Movement 80 mm Lajdjxnd I Eepfx Ab Ueh Table Table load 130 kg Tools Max weight 7.5 kg Additional Equipment Teleservice package via Internet Automatic central lubrication 4-fold linear changer for use with power packs This 3-axis FORMAT4 Creator 950 CNC Wood Machining Centre was manufactured in 2021. Ideal for precision woodworking, it offers robust construction and advanced control features. Consider the opportunity to buy this FORMAT4 Creator 950 CNC Wood Machining Centre. Contact us for more information. Application Types CNC Wood Machining

Condition: used, Year of construction: 1975, Wood Format Saw KAMRO type FK Maxi Rotation: 4000 RPM Year of construction: 1975 Laedpfx Ajxpvz Hsb Ush Blades dimensions: Ø 400 x 3,5 x 30 mm (blade not supplied with the machine) Back gear gauge length: 1500 mm Voltage: 380 V Length: 2600 mm Depth: 2000 mm Weight: 800 kg

Condition: good (used), Year of construction: 2011, functionality: fully functional, power: 37 kW (50.31 HP), first registration: 12/2011, overall weight: 3,200 kg, fuel type: electric, color: green, Wood chipper, three cutting knives, one perforating knife, 13x13 mm sieve, 2 feed rollers, main motor 37 kW, machine in good condition. Still in operation, scheduled for dismantling in 01/2026. Laedexpvf Eopfx Ab Ueh

Condition: excellent (used), Year of construction: 2000, Gross single-shaft shredder GAZ 62, year of manufacture 2000, 18.5 kW, cutting system with 30 Karo blades, rotor ø 248 mm, extraction nozzle 160 mm, hopper capacity 0.6 m³, hydraulic push floor, opening 600 x 800 mm, length 1800 x 1200 mm, height 1700 mm, weight 1300 kg Laedpfx Aexnc Ttob Ujh

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 2025/002, Finger jointing machines and lines are a masterpiece of woodworking industry >wood entry lengths 900 to 6100 mm< >wood rests and tools drive< >Best tooth milling quality and optimized cutting speed< >Long service life of the milling tools / dovetail cutters< -MINDA - MACH I (patented) -High performance finger jointing line -for KVH / DUO / TRIO / BSH / GL / CLT -technical running meters capacity = approx. 150 m/min -vertical and horizontal joints possible max. 200 x 300 mm -extremely flexible; short set-up times; reliable operation The only package system in the world that can also process a single board or single beam. -finger jointing machine, for vertical and horizontal milling, zinc profiles, made in Germany, along with new developments in the clamping stations and the transfer channel on the router table, has the Joema MACH I include a groundbreaking benefits, fast pace. Together with 1200 mm milling channel at 40 mm Thickness technical power meter = approx 150 meters /min, very reliable material transport - No vulnerable conveyor rollers, flaps and cross conveyors - high availability - for all sections including square suitable - by fully automatic, continuous channel matching is possible in extreme cases single mill - thus the system is extremely flexible, vertically horizontally and zinc profiles possible performance with KVH 160 x 280 mm are 38 meters / min, with KVH 100 x 300 mm, 64 meters / min, at BSH 45 x 250 mm are 110 meters / min, >>cutting-edge technology simply kept Ljdpfjcbyp Njx Ab Uoah

Condition: used, mileage: 975,000 km, Year of construction: 2014, Serial number: YS2R6X2000535xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21248 Specifications: Delivered with new EU inspection 2014 model Approx. 975,000 km Opticruise gearbox Full air suspension Tires (see photos) 2-way tipping Euro 6 Ledpfxow Ucivj Ab Ueah Length: 860 cm Width: 255 cm Wheelbase: 410 / 135 cm Curb weight: 13,570 kg 6x2 581 hp Tow hitch Toolbox Autoline S90 sand spreaders High-beam auxiliary lights 2 x rotating beacons Minor damage to passenger-side step (see photos) 2 x beds Radio/CD Air conditioning Description:Scania R580 6x2 chip truck with 2-way tipping bed from 2014 for sale.The truck is in daily operation and will be delivered with a fresh EU inspection.A 2012 3-axle chip trailer can be included for an additional cost. Delivery by agreement. Km: 975000 HK: 580 Technical approved: Yes EU-approved until: 14.10.2026 Own weight: 13570 Total Weight: 28000 Payload: 14355 Width: 255 Length: 860 Euro: 6 Model: R580 Gearbox: Automatic

Condition: good (used), Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, welding fume filter, welding fume extraction, flue gas extraction fan, extraction filter system -Manufacturer:Oelde, extraction system, extraction filter system, type size 16 -Air flow: 22 m³/min -Engine: 1.85 kW Lajdpfx Aboryalis Ueh -Speed: 2890 rpm -Individual components/technical data: see photos -Dimensions: 870/480/H1250 mm -Weight: 100 kg

Condition: excellent (used), Year of construction: 2007, Wood chipper Junkkari Oy Laodpexprcmofx Ab Uoh

Year of construction: 2014, condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 19994 Specifications: Laedpfx Ajv U Tmneb Ujh - 2014 model - 47m3 - Total weight: 20 T - Container weight: 2272 kg - Ready for delivery Description: Everything works as it should according to the owner. The container has been used for chipping Ready for delivery

Year of construction: 2015, condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 19995 Specifications: Ljdpfx Ajv U Syaob Uoah - 2015 model - 47m3 - Total weight: 20 T - Container weight: 2260 kg - Ready for delivery   Description: Everything works as it should according to the owner. The container has been used for chipping Ready for delivery

Condition: used, mileage: 1,405,000 km, Year of construction: 2006, Serial number: XLER6X2000512xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20683 Specifications: Model year: 2006 Mileage: approx. 1,405,000 km Transmission: Opticruise Suspension: Full air Tires: See photos Body: Vang body with hydraulic roof and side Tipping: Rear tipping Length: 870 cm Width: 255 cm Wheelbase: 410 / 136 cm Curb weight: 12,590 kg Engine power: 500 hp Fuel type: Diesel Equipment: Tool compartment Slirej sand spreaders Bull bar Auxiliary driving lights 2x bunk beds Radio/CD Ledpjwqwlrjfx Ab Usah Air conditioning / climate control Description:Scania R500 wood chip truck with Vang body, hydraulic roof, and hydraulic side opening.EU-approved until 07.10.2025.A matching chip trailer is available for an additional cost – see photos. The truck is ready for delivery. Km: 1405000 HK: 500 Technical approved: no EU-approved until: 07.10.2025 Own weight: 12590 Total Weight: 27000 Payload: 14335 Width: 255 Length: 870 Euro: 3 Model: R500 Gearbox: Automatic