Used Wood Chip Crusher for sale (11,409)

Condition: excellent (used), functionality: fully functional, Swivel spindle milling machine KÖLLE F 45 in very good condition; this machine comes from an assembly company and has been idle for the last few years, as it was no longer needed. Everything functions perfectly. All bearings and guides are in good condition; the machine runs very smoothly. Year of manufacture: 1990 Kedpfozt Ai Eox Ah Esdt with control panel on top Both fence jaws on the milling fence can be adjusted in depth, with fine adjustment and scale, allowing for planing work, e.g., on a gluing profile. The entire milling fence can also be adjusted in depth using a handwheel and a leadscrew, enabling very precise and fast adjustments. with AIGNER integral fence with spindle locking lever Chips can be removed very effectively with 2 extraction ports, 125 mm on the milling fence and 100 mm on the machine table. with 30 mm spindle, which can be swiveled steplessly from -5 to 45°; the spindle is swiveled electrically with a very precise display; fine adjustment can be made manually with a handwheel. The height adjustment is also electric, and a handwheel is also available for fine adjustment. with right/left rotation We will personally deliver and demonstrate the machine anywhere in Germany for €220.00, so you have no risk when purchasing; shipping to Austria and the rest of the EU is also possible upon request. with a large table opening of 375 mm, which can be reduced by using various rings (this allows for the use of cutters with a very large diameter, and you can also safely mill with small cutters). with 3000, 4000, 5000, 6000, 8000 and 10000 rpm the table is made of heavily ribbed cast iron with 30 mm spindle in the machine; another spindle can also be installed very robust and durable design; the machine was built for heavy-duty milling operations and is suitable for all milling applications. optimal power transmission through belt drive with instruction manual with 3-roller feed system HOL HER, type ET 117 the feed system has right/left rotation and 8 speeds; the feed rollers are individually mounted and are all in new condition. the machine table is 1000 mm deep and 1200 mm wide; it has an extendable support table 1200 mm long. the machine is ready for immediate use. 380 V, 4700 and 5700 W due to the 2 speeds with all necessary safety devices, motor brake, and emergency stop switch; the machine is approved by the German Wood Trade Association (Holz-BG) and has the GS safety mark. the machine weighs approximately 1000 kg with motor protection switch against overload professional-grade machine, not a hardware store reject optimal, simple, fast, and safe operation

Condition: used, Year of construction: 2022, Woodmizer block bandsaw, year 2022, incl. debarker, electric height adjustment, electric feed, 900 mm max. log diameter, 11 kW, 10 m cutting length, 1000 kg Ksdpfx Ahoxlnf Aj Eedt

Year of construction: 1987, condition: like new (used), machine/vehicle number: 2008, ID AG 11 PEINER GREIFER Producer: Salzgitter Machinen u. Anlagen AG, Salzgitter Bad/Peiner SMAG Lifting Technologies GmbH Year of manufacture: 1987, good condition, Type 6231, Product MMGL2000-4, degree of protection IP44, Voltage 380V, Frequency 50 Hz, Control block OF-519-0-4-15N, Max pressure 180 bar, Load capacity/SWL 1600 kg, deadweight 2030 kg, content 2.0 m3 Mainly used in port operations as well as in waste incineration plants, steelworks and scrap yards The gripper type is suitable for handling scrap, ingots, rubbish, biomass and woodchips, among other things Ksdpfx Ajhgg Eujh Eedt The PEINER grab volume corresponds to the internal volume when the trays are closed - the actual total payload is greater Worldwide service network PEINER are designed for cranes with power supply. Depending on your individual crane equipment, the gripper can either be attached directly to slewing gears or traverses. EFFICIENCY - multi-shell design for various goods handled: Example wood chips: Maximizing the filling volume with the least possible transport loss. Equipped with the latest shell design, PEINER MMGL are ideally suited for handling wood chips. They show perfect penetration, achieve an optimal filling volume and close cleanly. PERFORMANCE - High turnover volumes per loading cycle: Motorized orange peel grabs adapt to the material being handled with their individually driven shells. Transport losses are minimized. Optimal construction height, low center of gravity and the robust construction offer universal application possibilities of the PEINER MMG / MMGL series. PEINER MMG / L have extremely short opening and closing times and thus optimize the number of possible loading cycles per hour. ECONOMIC EFFICIENCY - Low service costs: The maintenance points are easy to reach. In order to increase the operating times and to minimize the service effort, PEINER can be equipped with automatic central lubrication. RELIABILITY - your investment in the future: PEINER are the result of many years of experience in bulk handling, high quality components and modern manufacturing standards. Sales price 9.500 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: new, Year of construction: 2025, Wood chips are a common by-product generated by woodworking companies during the manufacturing process. Due to low options for realization wood chips are usually discarded by selling it to heating plants for a low price. Our MM-2000 hammer mill allows companies to turn wood chips into briquettable sawdust by shredding and crushing it through metal screens also known as sieves. Quick-release hatches allow quick and easy access for maintenance while keeping workers safe. Blades of the machine are not fixed and spin freely due to the centrifugal principle. This means that blades take less damage on impact and have an extended lifetime. Fixed blades can be ordered if required for specific produce. The mill can be ordered to fit various produce and applications ranging from reducing biomass waste to spice production, chemical and mineral. The perforated sieves and blades are easily interchangeable to adjust for different types of materials and purposes. Free test-mill of material is available on demand. Capacity depends on material Dimensions 1765x960x1060mm. Kdodpfxefh R I Aj Ah Est Weight 996 kg. Power 30/37/45kW, 50Hz, 380V.

Condition: new, Year of construction: 2025, Units available in stock! Power 18.5kW Power supply 380V 50Hz Shredding area size 600x595mm Revolutions 98RPM Length 2085mm Width 1248mm Height 1495mm Weight 1550kg VVS-600 is the smallest member of our VVS family of shredders. Single rotor shredders are some of the most universal chipping platforms out there. Best known for shredding various types of wood (Briquettes, hardwood, softwood, lumber), the platform can easily be adapted to numerous other substances such as rubbers, plastics, paper, light metals and general waste. When implemented by woodworking companies into their current lineup this machine can turn woodworking and furniture making waste into briquetteable particles which is easier to store, transport and sell. Our VVS-600 provides you with features found in much more powerful and expensive shredding units while keeping the price down to earth. A couple of them: The horizontal hydraulic ram: - Assists the rotor by pushing the material to provide maximum working area efficiency. - Is controlled by an algorithm to ensure safety and efficiency - Gimbal-mounted hydraulics provide a high lifetime - Enclosed hydraulics to reduce noise, vibrations and increase safety Drivetrain: - The drivetrain is protected against hits from foreign objects by using a twin-disengagement system which is easily resettable and serviceable. - Offset placement of the rotor bearings keeps them away from dust and heat buildup. Rotor: - The centrepiece of the rotor is milled from a single block of high-grade steel. - In case of severe damage to the rotor or its shafts due to a foreign object, the latter can be replaced without the need to replace the whole unit – costs saved for the user! - Blade holders are replaceable – unlike welded-in options, our rotor does not need to be replaced if the blade holders get damaged. Kjdpfxjfpa Awj Ah Eedt - 4-sided rotatable blades – a single blade will last you 4 times as long. - Counter blades can be adjusted to compensate for the increased tolerances once the blades start wearing out – longer runtime with a single set of blades. Output: - Output volume and particle size is controlled by an interchangeable sieve screen which is adapted based on the material used. - The shredded material can be transported out of the machine by using different types of transporters, including air, belt and screw conveyors. Affordable pricing, proven reliability, easy maintenance, warranty, quick service and parts delivery – these are just a couple of reasons to choose our VVS series of shredders.

Year of construction: 2008, operating hours: 133 h, condition: used, JBM - Wood Chipper Type 630 MDX on Single-Axle Chassis / Car Trailer Ksdpfxjzyf Hto Ah Eodt > Kubota diesel engine 44 kW (60 HP) > Sprung, braked single-axle chassis > Wide feed: 310 x 220 mm > Max. log diameter: up to 220 mm > Adjustable wood chip length: 0 – 25 mm > Weight approx. 1,690 kg > Only 133 hours! > Year of manufacture: 2008 On request, we can provide a leasing or financing offer. Mr. Mihm (phone) will be happy to assist you. Further information can be found on our website. Errors and prior sale excepted. = Further Information = Please contact Tobias Ebert for more details.

Condition: used, Year of construction: 2023, Special price – Showroom machine Garbsen INDUSTRIAL AUTOMATIC EDGE BANDING MACHINE stefani md (the images of the machine are not binding with regard to the actual features specified below) KEY FEATURES EDGE BANDING OF SOLID WOOD UP TO 15 MM THICKNESS: SIMPLE AND FUNCTIONAL PROCESSING OF EDGES WITH LARGE DIMENSIONS "SGP" GLUE TANK: USE OF EVA AND POLYURETHANE GLUE FOR A PERFECT GLUE JOINT "STARTOUCH" CONTROL: A TOUCH IS ALL IT TAKES TO OPERATE THE MACHINE GENERAL FEATURES Automatic single-sided edge banding machine for applying edge banding with hot melt adhesive to the four sides of straight panels and for subsequent finishing. Machine frame and longitudinal supports made of cold-rolled steel in a box construction, manufactured in a single element, for high rigidity and vibration-free operation to accommodate the working units. Openings with slides for discharging any remaining chips to the floor. Upper pressure beam made of thick-walled steel construction and with columns made of cast iron, for a vibration-free structure where the working units are attached. Pressure rollers on the feed chain in a double row, made of rubber with a high coefficient of friction and with sliding on bearing rollers. Device to protect the pressure rollers from any remaining chips. Electronic adjustment of the upper pressure unit, depending on the panel thickness. Upper working units attached to the pressure beam or mechanically connected to ensure automatic adjustment when changing the panel thickness. Lower working units attached to the machine frame or to the longitudinal support, for a precise reference to the panel. All high-frequency motors are operated via frequency inverters. Protective cover for all units positioned after the gluing unit. Windows made of polycarbonate ensure a good view of the units during processing. Interior lighting of the cabinet. Protective cover with sound-absorbing material for lower noise emissions during processing. The spacer on the infeed guide allows the machine to be fed in the correct spacing. The spacing is automatically adjusted to the selected feed speed. Extraction nozzle arranged on the soundproof hood. Swivel control panel in an ergonomic position at the machine infeed. The electrical system complies with current regulations. Electrical components housed in a metal housing, attached to the machine frame and provided with doors for convenient access during any maintenance work. Panel feed The panel feed is carried out via a feed chain consisting of rubber sliding blocks with a high coefficient of friction, attached to a 1-1/4" industrial chain. The chain slides on 2 guides made of hardened and ground steel, a round guide and a flat guide, to guarantee a straight feed and protect against lateral displacement. Automatic lubrication of the chain. The amount of lubricating oil is optimized by the control system depending on the panels being processed. Support roller track externally and positioned along the entire length of the machine; consisting of an extendable opening system with sliding on linear bearings and plastic sliding rollers with steel pivot pins. "STARTOUCH" CONTROL Main features: 12" touchscreen color display Graphical representation of all processing units and their status (on/off) Kjdpfozc Ilxsx Ah Ejdt

Condition: reconditioned (used), functionality: fully functional, Completely renovated Bruks BS 3 wood chip screen including stand Ksdpfxjwiw Tme Ah Eedt

Condition: new, Year of construction: 2026, The DCV6000E is a technologically advanced industrial dust extraction unit designed for the efficient removal of sawdust, chips and dust from multiple workstations simultaneously. Designed for uninterrupted, intensive operation in production facilities, it provides constant suction performance and excellent air quality in the workshop. The reinforced construction and dynamically balanced impeller guarantee quiet, maintenance-free operation. Main Advantages of the Machine Very high performance – 6000 m³/h, ideal for operating with multiple machines simultaneously. 250 mm suction inlet diameter ensuring high airflow and compatibility with central extraction systems. 28 polyester filters with a filtration accuracy of 5 microns and a total filtration area of 14 m². Construction adapted for ceiling-mounted installation – space saving and the possibility of expanding the system. Hermetic bag replacement system – cleanliness and convenient operation. Energy-efficient operation thanks to optimized fan blades and high tightness of the suction system. Construction and Technology The extractor body is made of thick hardened steel, resistant to deformation and vibrations. The heart of the system is a metal impeller, dynamically balanced to reduce noise and ensure stability when operating with high airflow. Polyester filters with a large surface area and precise permeability retain dust particles with a size of up to 5 microns. The possibility of expanding the system with a HEPA filter means that the system meets the highest air quality standards. Precision and Work Efficiency The DCV6000E achieves a suction velocity of 28–32 m/s with a 3.8 kW motor operating at 3000 rpm. This allows it to efficiently handle multi-station woodworking lines and automated production systems, regardless of the intensity of the load. The unit guarantees stable parameters even during continuous operation. Application The DCV6000E woodworking dust extractor is used in furniture manufacturing plants, industrial woodworking shops, CNC production lines and wherever significant amounts of wood dust are generated. It works with: panel saws and sizing saws, wide-belt sanders, edgebanders and planers, CNC machines for wood. Standard Equipment 28 dust filters (polyester, 5 microns) galvanized steel body metal impeller and suction housing hermetic bag containers Technical Specifications S1 motor power — 3.8 kW / 400 V, 50 Hz Motor speed — 3000 rpm Extraction capacity — 6000 m³/h Negative pressure — 3000 Pa Noise level — 80 dB Suction inlet diameter — 250 mm Suction velocity — 28–32 m/s Filter surface area — 14 m² Number of filters — 28 Filter material — Polyester, 5 microns / filter category "G" Dimensions (L × W × H) — 2000 × 625 × 2150 mm Weight — 262 kg Ksdpfx Ahovzqxhs Ejdt The DCV6000E is a proven solution for the woodworking industry that combines reliability, energy efficiency and high filtration quality. Invest in a clean working environment and the safety of your production – contact our sales department to learn more about the available configuration options for the extraction system.

Condition: excellent (used), Year of construction: 2018, Catalogue number 7974 TECHNICAL DATA - Infeed opening of widened hopper: 1500x1730mm - Discharge outlet for shredded wood: 200mm diameter - Rotor working width: 990mm Ksdpfszrnbwsx Ah Eodt - Main motor: 22kW - Pump motor: 0.75kW - Number of knives: 54 pcs - Knife dimensions: 40x40mm - Screen: 20mm - Hydraulic feed drawer - Electric auto-reverse - Dimensions (L/W/H): 2500x2200x2350mm - Weight: approx. 2000kg ADVANTAGES – German made - Pulse feed pusher - Halfway pusher - Fast/forward pusher – automatic feed drawer speed adjustment – Original DTR documentation + CE, year 2018 – Hydraulic feed drawer – Auger – screw conveyor for chip transport – Auto-reverse – Used chipper, in very good condition Net price: 115,900 PLN Net price: 27,600 EUR based on exchange rate 4.2 EUR (Prices may change with significant fluctuations)

Condition: refurbished (used), Year of construction: 2002, functionality: fully functional, power: 45 kW (61.18 HP), overall weight: 4,700 kg, color: grey, Maximum chipping height: mm 200 Feed-in width: mm 650 Feed rollers: units 3 Rotor fly circle: mm 600 Chip length approx.: mm 20–30 Kodpfxjynzg He Ah Eodt Output capacity: 18–22 cubic meters/hour of wood chips Chipping knives: units 2 Feed motors: kW 2 x 3 Net weight approx.: kg 4700 Feed: horizontal Machine frame: steel, gas-shielded welded Rotor: steel, gas-shielded welded, dynamically balanced Bearings: oversize roller bearings Bearing housing: steel, flange housing Feed rollers: steel, special toothed Chip discharge: located below the machine Machine grate: (sieve) for post-shredding of oversized pieces Drive pulley: matched to main motor, N = 1500 rpm Hydraulic system: comprising hydraulic pump, diaphragm accumulator, cylinder, pressure gauge, control valves for lifting the upper feed roller Feed system: by 2 geared motors, manufacturer NORD GETRIEBE

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, type of input current: three-phase, cutting length (max.): 3,600 mm, cutting width (max.): 400 mm, year of last overhaul: 2024, For sale is a complete stationary sawmill including a dust extraction system and a log infeed system! The new price for the sawing line alone was over €285,000! TECHNICAL DETAILS Cutting length (max.): 3,600 mm Cutting width (max.): 400 mm MACHINE DETAILS Type of input current: Three-phase Year of last overhaul: 2024 EQUIPMENT Kdedpozki Txefx Ah Ejt Log deck LD1-20LH-3SLP-002 Incline chain conveyor 517100-slp2-002 Log turner 517180-SLP2-002 Wood Mizer set works control unit with chair and joystick controls TBS01 setworks First set of vertical saws TVSSC/002/2018 Outfeed conveyor TVSEH15S-SC3.6-SD-SLP2-002 Waste chain conveyor for slab wood removal CC4-3.6H-SLP2-002 Roller conveyor CR8.3.6H-SLP2-002 Roller conveyor with centralising bed CR8-3.6H-SLP2-002 Roller conveyor with air ram stabilising arms TVSEH15S-FT3.6 Second set of vertical saws TVSEH15S-FT3.6-SLP2-002 Flat chain conveyor with stabilising arms TVSEH15S-FT3.6-SLP2-002 Waste chain conveyor for slab wood removal CC4-3.6H-SLP2-002 Horizontal saw HR700EH15S-1-SLP2-002 Roller conveyor with cross transfer chains CR6.5.4H-P-SLP2-002 Transfer chain conveyer x 8 CC2-2.7H-4-P-SLP-002 Cross cut saw 00/19079 1.65-3.6 Dust extraction system with bag filter and blower unit into trailer.

Condition: ready for operation (used), functionality: fully functional, For sale is a wood chipping line (chipper canter line) with the following components: - Log infeed - Step conveyor for logs, manufacturer Saenger + Massierer - Singulator - Log conveyor - Centering infeed with log turner, manufacturer Kockums, type 447-6 C, serial number 70984 - Chipper centering device, manufacturer Kockums, type 240-12 D - Outfeed conveyor with lateral discharge option - Control cabinet and control system (Siemens Simatic Panel) for the entire line - Max. log diameter: 50 cm Kdsdpfx Ahjzrfkve Eet The line is sold excluding any warranty and liability for defects.

Condition: excellent (used), Year of construction: 2000, operating hours: 10,900 h, functionality: fully functional, overall weight: 16,000 kg, power: 308 kW (418.76 HP), Willibald MZA 3500 / Shredder / Chipper / Crusher • Manufacturer: Willibald • Type: MZA 3500 • Year of manufacture: 2000 • Operating hours: 10,900 hours • Engine: MAN D 2876, 6-cylinder diesel • Power: 308 kW / 418 hp • Inlet opening: 500 mm • Number of axles: 2 tandem axles • Braking system: Air pressure • Number of cutting blades: 48 • Rotor speed: 1300 rpm • Drawbar: 40 mm Kdsdpfxezdtzmj Ah Ejt • Fiberizing of organic material for composting, up to a diameter of 30 cm • Shredding of old wood and waste wood, up to a diameter of 30 cm • Total weight: 16,000 kg • German machine • Immediately ready for use • This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typos not excluded. - Sale subject to our general terms and conditions.

Condition: used, Year of construction: 2026, New exhibition machine! General technical features: Planing width: max. 630 mm Planing height: 2.8 - 300 mm Maximum planing removal: 12 mm Workpiece length min.: 270 mm Weight: approx. 1,200 - 1,400 kg Table length: 1,260 mm Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; buttons for manual quick and fine adjustment of the planing thickness according to digital display, push buttons for starting and stopping the cutterhead, integrated operating hour counter - Cutterhead: Tersa full steel cutterhead with Z 4 - Thickness table: Electric thickness table adjustment with fine adjustment, feed rate 10 mm/s, mounted on 4 support spindles for tilt stability, table surface finely planed - Feed: 2 speeds 6 / 12 m/min - Extraction: Hinged, split hood with chip extraction connection Ø 160 mm, can be connected on the left / right (in special cases on both sides); minimum extraction air volume: 24 m³/min at 20 m/s, negative pressure 1,050 Pa Planing width: split hood with chip extraction connection - Maintenance device: Central lubrication strip for oil lubrication points; lubrication of bearings / cutterhead via grease fittings Accessories: 1 grease gun, filled with long-life grease 1 oil can 1 adjustable wrench 1 tool for cutter replacement 1 pair of blank cutters 640 mm 2 pairs of TERSA reversible cutters 640 mm CV - Electrical equipment: Electronic soft start/brake device; contact for controlling the extraction; motor circuit breaker and winding protection, undervoltage protection; lockable main switch, 2 EMERGENCY STOP buttons (infeed / outfeed); required voltage supply: 3 ~, 400 V - 50Hz - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idling noise (without extraction) P1 65 Working noise (with extraction) P1 77 Idling noise (without extraction) P2 65 Working noise (with extraction) P2 77 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idling noise (without extraction) 84 Working noise (with extraction) 90 - Dust emission DGUV test "tested for wood dust" according to DGUV 209-044 / BGI 739-1 Special equipment: -Drive power 7.5 kW (10 hp) -2nd rubber feed roller, ø 85 mm, complete -Thickness table extension, foldable, 630 x 450 mm -Special speed 6,000 rpm Location: Rieth Kdsdpfxez A Hhuo Ah Est

Condition: used, Year of construction: 2013, .30 Base machine ACCORD 30 FX N. 1 CONCEPTCNC machining center with a moving gantry and a fixed worktable for processing various sheet-like materials: chipboard, MDF, laminated solid wood, plastic materials, and light alloys. STRUCTUREThe machine is developed using the best three-dimensional CAD systems for solid modeling. The machine bed and moving crossbeam represent the two main elements of the machine structure and are manufactured in the company's own foundry. All mechanical machining operations are carried out on special production equipment in a single setup to ensure optimal precision and to minimize tolerances during machining. The control cabinet is mounted directly on the machine bed, allowing for a very compact design and easy access. CONTROL UNITThe control unit consists of an industrial NC control system with an integrated office PC (desktop computer). The CNC solution with an office PC combines all the features of numerical control with the typical user-friendliness of an office PC, which greatly simplifies the control of the machine by enabling the use of the XILOG MAESTRO user interface, i.e., the software developed by SCM for simple and fast programming, even for non-experts. GENERAL FEATURESPassage height: - 250 mm with H50 accessories- 190 mm with H110 accessoriesPendulum machiningAutomatic lubrication of the axesAir conditioning system to maintain the correct internal temperature in the control cabinet. Software for remote customer serviceOperator interface Xilog MAESTRO with integrated CAD/CAM, which allows for the extremely simple execution of products even with special shapes.A number of advanced functions allow for: - programming via macros- creating and managing subprograms- optimizing machining- managing all machine functions- creating and managing a database of tools93.07.31 Voltage 400 EU 93.12.01 Frequency 50 Hz R0.00.03 LINGUA P.C. GERMAN 02.12.57 ACCORD 30 FX - Worktable X-Y = 3680x1380 56.05.25 No. 6 Support rail MATIC - L1300 The worktable is equipped with: - no. 2 lateral fixed supports- no. 6 aluminum supports, motor-driven and movable along the X-axis- motorized conveyor belt for unloading chipsEach movable support has: - no. 3 motor-driven support rails for clamping cylinders and vacuum suction cups- air blower for cleaning on each movable support- pneumatic locking/release for quick replacement of the clamping cylinders and vacuum suction cups- preparation for lifting devices- preparation for reference stopsThe workpiece vacuum clamping system is divided into 2 independent worktables.23.02.19 DUO Prisma K working unitThe working unit with 5 interpolating axes is located on the moving crossbeam, which provides maximum stability during milling and thus also ensures optimal machining quality of the workpieces, even with high material removal rates. It allows for rotation around the axes arranged at 50° to each other and has many advantages over traditional 5-axis working units, such as: - the full use of the work areas both with 5 axes and with a vertical spindle- spindle external dimensions outside the working area- a particularly light design for horizontal machiningThe unit has a central chip extraction system. Kodpfx Aozl Ap Nsh Eodt

Condition: new, functionality: fully functional, power: 197 kW (267.85 HP), fuel type: electric, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FABO MCC-200 is small efficient model of CC series, those are a mobile type & closed circuit crushing and screening plants that is used for processing of hard materials such as basalt, granite, gabbro, dolomite and other types of hard stones. TECHNICAL SPECIFICATIONS: -Bunker: 15m3 -Production Capacity: 150-250 Tons Per Hour -Crusher Type: Cone Crusher -Maximum Feeding Size: 180mm -Vibrating Screen Size and Deck: 1700x4500mm 3-4 decks -Total Motor Power: 197 kW MCC-200 is a combination of: • Bunker(Hopper) • Vibrating Feeder • Cone Crusher • High Stroke Type Vibrating Screen • Folding type feeding, feedback, bypass and stock conveyor belts • Hydraulic feet • Mobile Chassis with axles and tires • Fully Automation System • Dust Suppression System • Easy walking platforms for maintenance Kedpfx Ajzwfqmoh Eodt Diesel Generator (Optional) FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: refurbished (used), Year of construction: 1990, Drum chipper / chipping machine / wood shredder fully reconditioned (workshop-reconditioned) Make: Rudnick & Enners Year of manufacture: 1990 Rudnick & Enners drum chipper, type TH-200/650/3 Kdsdpfx Ahozq Sqgj Eet workshop-refurbished (fully reconditioned) with new bearings (spherical roller bearings) and tested rotor New blades and counter-blades Feed width/height: 650 x 200 mm Rotor diameter: 600 mm Screen mesh size: 50 x 50 mm Drive power: 75.0 kW Feed motors: 2 x 3.0 kW Weight: approx. 3,500 kg Machine colour: RAL 6011 Reseda green Without electrical installation and without control cabinet

Condition: excellent (used), Year of construction: 1996, Wood chip screening system Manufacturer - Andritz Group, Model: Konewood CS600 Screen capacity: 400-675m3/h Sieving sawdust and shavings from wood chips Conveyors. Steel Structures: – Steel support structures for screens and conveyors – Ladders and walkways for operation and maintenance Kdsdpfx Aoxn T R Aoh Eot

Condition: used, Year of construction: 2006, operating hours: 926 h, functionality: fully functional, total width: 1,500 mm, total height: 1,700 mm, total length: 2,000 mm, briquette diameter: 50 mm, overall weight: 750 kg, Equipment: emergency stop, Hydraulic briquetting press for compressing dry wood chips, sawdust, paper, cardboard, and other similar materials. Throughput (material-dependent) is approximately 30 to 50 kg/h. Kdjdpsztl E Asfx Ah Eot The machine was inspected at the WEIMA factory after 600 operating hours, and after that, I used the press very little. For this reason, I am offering the press for sale.

Condition: like new (used), Year of construction: 2019, Vacomat 350 XP TWIN The Vacomat 350 XP TWIN is a high-performance dust extraction unit and a true energy-saving marvel among mobile dust extractors. Two frequency-controlled motors (5.5 kW each) ensure that the suction power is adjusted accordingly, especially under highly variable operating conditions. This ensures that only the energy that is actually needed is consumed. This dust extractor handles air volumes of up to 10,000 m³/h and is ideally suited for extracting dust from large CNC machines or entire machining centers. The innovative and highly intelligent control system automates the extraction process in conjunction with the connected machines. Extraction starts automatically as soon as a connected machining center is switched on. If the power requirement is lower, only one fan is started. As soon as several extraction points are in operation, the second fan is automatically switched on. As standard, the filter sleeves are cleaned automatically during operating breaks, as soon as all connected machining centers are switched off. Our patented filter shaking system then ensures gentle cleaning via a pneumatic/mechanical process using a compressed air connection (inlet pressure 6 bar, air consumption per cleaning cycle approx. 11 l). Optionally, and particularly recommended for very high and extremely fine dust concentrations, such as gypsum dust, an efficient pressure pulse cleaning system is available. The cleaning process via the compressed air tank takes place offline, after the extraction operation (NOTE: height then +100 mm and length +350 mm). Our Vacomats are manufactured using a modular system. As standard, the dust and chip mixture is discharged into four dust-tight chip collection containers (4 x 120 l) with durable plastic liners. A negative pressure channel securely holds the foil bags in the collection container. Viewing windows make it easy to check the fill level. Low energy consumption thanks to a modern, high-efficiency motor (IE3) "Made in Germany" and a flow-optimized internal housing with low air resistance. Heat recovery through a recirculation system: The warm exhaust air is filtered and fed back into the workshop. Low noise level: A double-walled filter sleeve housing absorbs the extraction noise directly inside the Vacomat. In addition, the fan housing is soundproof. Approved for indoor installation in the wood dust area - manufactured according to the new DIN EN 16770 standard. Healthy return air: High-quality, specially developed filter materials made of antistatic polyester needle felt filter out 99.9% of dust and chip waste from the air (dust class M for St 1 dust, according to TRGS 553). Increased safety through fire and explosion protection measures according to DIN EN 16770: pressure pulse tested up to 20,000 Pa, automatically activated powder extinguishing system - no water damage! Ksdozp Edwepfx Ah Esdt Operational reliability: A pressure gauge continuously monitors the extraction performance. Error messages are displayed by the signal light. Low follow-up costs due to high-quality components and long service life of the filter medium: For example, an extra-large settling chamber ensures an initial separation of coarse chip waste. This prevents the filter sleeves from being additionally loaded with material. Low maintenance effort thanks to the maintenance unit on the motor console and easy access to the inside of the filter. All specifications according to the manufacturer.

Condition: used, Year of construction: 2015, Base machine T65C Automatic, 1 unit General technical features: • Weight: 1600-2,200 kg, Martin composite stand • Table size: 860 mm x 1370 mm in gray cast iron; table extension is standard, designed as a lockable tool tray, 335 mm x 625 mm • Table height: 900 mm • Scoring table: Standard length 3000 mm, table length corresponds to cutting length; position-independent locking; guides are hardened, wear-resistant, self-cleaning; table lip is replaceable; design in anodized aluminum • Saw blade spindle: Ø 30 mm for main saw blade, two drive pins 8 mm • Saw blade change: Quick-change system "ProLock" • Saw blade diameter: Ø 250 - 550 mm; can be recessed under the table up to 400 mm; saw blades up to Ø 400 mm can be used with inserted scoring saw blades • Cutting width: 1,100 mm • Saw blade swivel: 0° to +46° • Cutting height: max. 204 mm / saw blade 550 mm / 0°, max. 135 mm / saw blade 550 mm / +45° Ksdpfx Ajz Alfush Ejdt • Cutting width (main saw): Saw blades with max. 6 mm cutting width at swivel angle 0° to +46°; special tools with max. 20 mm cutting width at swivel angle 0° • Motor power: 5.5 kW (7.5 hp), 3 ~ / 400 V - 50 Hz • Speeds: 2800 / 4000 / 5000 rpm; easy and convenient speed change from the front via the chip guard • Length stop: Design in anodized aluminum with continuous support, fine adjustment for both fence elements; dimension display via a scale with a magnifying glass; length compensation for angled cuts with electronic assistance; cutting length 95 - 2000 mm, extendable up to 3220 mm • Cross table: Design in zinc-coated steel; angled cuts according to the scale without repositioning the stop; integrated fixing positions for 0°, 22.5°, 30° and 45° cuts, one-hand clamping on the scoring table; support dimensions 1340 x 650 mm • Parallel stop: Electromotive positioning of the parallel stop; stop bar in anodized aluminum, foldable; complete integration of the parallel stop into the control system; guided by four grooved ball bearings, floating above the machine table, removable in any position; movement of the stop in the safety area (0 - 200 mm) in hold mode, display resolution: 0.1 mm; repeat accuracy ± 0.05 mm • Extraction: Connection to protective hood Ø 100 mm, machine stand Ø 120 mm; minimum extraction air volume: 23 m³/min at 800 Pa at the main connection 120 mm • Protective hood: Protective hood with 2 blade sets (1x flat for 0° cuts, 1x with a one-sided belly for cuts 0° to 46°); passage dimension between saw blade axis and support column: approx. 900 mm, clearance when the hood is swiveled away between the saw blade and the protective hood arm: approx. 635 mm; releasing the locking from the working position • Standard accessories: 1 scoring shoe on the scoring table, 1 handle for pushing the wood, 1 ProLock combination wrench, 1 return handle, 4 shims (250/350, 350/450, 450/500, 500/550), 1 push stick • Control panel: Control panel at eye level, can be swiveled away • Electrical equipment (according to VDE/EN 60204): Electronic soft start/stop device for the main saw blade; contact for controlling the extraction; motor protection switch and winding protection, emergency stop button; required voltage supply: 3 ~ / 400 V - 50 Hz • Emission values, workplace emission: Noise values according to DIN EN ISO 11202, dust values according to DIN 33893. Please refer to the operating manual for the technical values. Performance features of the T65 control system: Performance features of the 5.7" (145 mm) touch screen control system with color L

Condition: new, Year of construction: 2026, functionality: fully functional, CONSTMACH secondary impact crushers set the standard in rock crushing machine technology with their high efficiency and superior crushing performance. These crushers are specifically designed to meet high-capacity production needs. Thanks to their robust body structure and optimized rotor design, they deliver a perfect cubic-shaped final product even with hard and abrasive materials. The three-stage pendulum system allows primary, secondary, and tertiary crushing operations to be performed on a single machine. This minimizes time loss in the production process while maximizing efficiency. High chrome or manganese alloy cutting bars offer long life and low maintenance costs. The hydraulic opening system maximizes operating time by facilitating maintenance and part replacement. CONSTMACH secondary impact crushers offer a reliable solution for any rock crushing plant thanks to their high reduction ratio and wide discharge opening. Secondary Impact Crusher Technical Specifications CSI-1210 Rotor Diameter: 1,100 x 1,100 mm Maximum Feed Size: 200 mm Production Capacity: 60 - 100 t/h Motor Power: 160 kW Weight: 17,500 kg CSI-1212 Rotor Diameter: 1,100 x 1,250 mm Maximum Feed Size: 250 mm Production Capacity: 120 - 150 t/h Motor Power: 200 kW Weight: 21,500 kg CSI-1215 Rotor Diameter: 1,100 x 1,500 mm Maximum Feed Size: 350 mm Production Capacity: 200 - 250 t/h Motor Power: 250 kW Weight: 26,000 kg Kdjdpfx Aoxqgtieh Eet Why Choose CONSTMACH Secondary Impact Crushers? CONSTMACH prioritizes quality and durability in the production of stone crushing machines. Our secondary impact crusher models reduce operating costs with their long-lasting components, low maintenance requirements, and high performance. They offer guaranteed uninterrupted operation with an extensive service network and easy access to spare parts. Each model is designed to suit different production capacities, providing the most suitable solution for your facility. With reliable engineering, high production standards, and a customer-focused service approach, CONSTMACH is always one step ahead in the stone crushing industry. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: new, Year of construction: 2026, functionality: fully functional, CONSTMACH secondary impact crushers set the standard in rock crushing machine technology with their high efficiency and superior crushing performance. These crushers are specifically designed to meet high-capacity production needs. Thanks to their robust body structure and optimized rotor design, they deliver a perfect cubic-shaped final product even with hard and abrasive materials. The three-stage pendulum system allows primary, secondary, and tertiary crushing operations to be performed on a single machine. This minimizes time loss in the production process while maximizing efficiency. High chrome or manganese alloy cutting bars offer long life and low maintenance costs. The hydraulic opening system maximizes operating time by facilitating maintenance and part replacement. CONSTMACH secondary impact crushers offer a reliable solution for any rock crushing plant thanks to their high reduction ratio and wide discharge opening. Secondary Impact Crusher Technical Specifications CSI-1210 Ksdpfx Ahjxpuxwo Eodt Rotor Diameter: 1,100 x 1,100 mm Maximum Feed Size: 200 mm Production Capacity: 60 - 100 t/h Motor Power: 160 kW Weight: 17,500 kg CSI-1212 Rotor Diameter: 1,100 x 1,250 mm Maximum Feed Size: 250 mm Production Capacity: 120 - 150 t/h Motor Power: 200 kW Weight: 21,500 kg CSI-1215 Rotor Diameter: 1,100 x 1,500 mm Maximum Feed Size: 350 mm Production Capacity: 200 - 250 t/h Motor Power: 250 kW Weight: 26,000 kg Why Choose CONSTMACH Secondary Impact Crushers? CONSTMACH prioritizes quality and durability in the production of stone crushing machines. Our secondary impact crusher models reduce operating costs with their long-lasting components, low maintenance requirements, and high performance. They offer guaranteed uninterrupted operation with an extensive service network and easy access to spare parts. Each model is designed to suit different production capacities, providing the most suitable solution for your facility. With reliable engineering, high production standards, and a customer-focused service approach, CONSTMACH is always one step ahead in the stone crushing industry. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: used, Year of construction: 2020, max. workpiece length 6360 mm profile spindle 1 Stück main drive 13 kW Control Maestro SCM CNC Machining Center ACCORD 40 FX for windows and doors ----- Available as an OPTION at an additonal cost of 20.000 Euro: extensive window and door tooling among others (window cutting available upon request!): Wooden windows IV 68, 78, 92 Wooden "style" windows Wood-aluminum windows Front doors Lift-and-slide doors Box windows Machine still in operation, available for viewing! Technical Summary (detailed description available upon request!): ----- - ??Working area X-Y = 6360 x 1905 Z = 350 - Automatic table with 8 support rails MATIC - L1825 - 5-axis spindle MAXI - Prisma T, HSK 63 E, 13 kW - RTCP Setting - Self-calibration system for Prisma work unit - Adjustable chip removal device on the electric spindle - Preparation for "Prisma T-S" angle gearbox - BRC - Working unit: Saw blade for face machining, 1 vertical milling cutter connection 3 vertical, independent drill heads, center distance 32 mm 3 vertical drill heads (not independent), center distance 21.5 mm, for mortise drilling 4 horizontal drill heads (2 per side, not independent), center distance 21.5 mm 2 horizontal milling heads (1 per (Page) - TRC 48 - Rear Tool Magazine 48 tool positions (excluding tool holders) Center-to-center distance between positions: 104 mm Max. tool diameter: 350 mm Max. tool length: 320 mm Max. weight per tool: 10 kg (15 kg with HSK 63 E spindle) Max. total weight on the magazine: 250 kg - MACH 5 - Quick-change system: Allows tool changes on the electric spindle in just a few seconds. - Pendulum operation - Automatic lubrication of the axes - eye-M operating console with integrated PC - Additional fixed control panel - TECPAD - Remote control of machine functions - Clamping jaw preparation H145 for worktable with 8 support rails - Front stop row H110 for worktable with 8 support rails - Rear stop row H110 for worktable with 8 support rails Ksdsy Hl Iyjpfx Ah Eodt - Suction cup H110 145x145 mm - Swivel suction cup H110 145x55 mm - Swivel suction cup H110 180x65 mm - First side stop row H145 for worktable with 8 support rails Second side stop row H145 for worktable with 8 support rails Clamp H145 with round base Clamp H145 with square base N.6 Lifting devices with double stroke H145 Laser and reference stop H145 for sheet (left) - PRO-SPEED safety system - Maestro CNC - Machine operator interface and programming - Maestro ProView - Simulation software Tools are sold in the condition, scope, and with accessories as they are currently in stock. Note regarding window cutouts, tool drawings, and tool system listings: Engelfried GmbH does not guarantee that the tools actually available correspond to the systems listed and drawn. (Technical specifications according to the manufacturer - without guarantee!)