Used Wood Boiler for sale (16,696)

Condition: ready for operation (used), Year of construction: 2020, A complete low-pressure steam boiler system Viessmann is available. 1) Condensate unit Viessmann TWA-T LS 0,9, max. operating pressure: 0.1bar, test pressure: 0.2bar, max. temperature: 110°C, water volume: 400l. 2) Dosing system Schweizer-Chemie EMP 2.5l E60. 3) Steam generator Viessmann Vitoplex 100-LS, year of manufacture: 2019, nominal heat output: 460kW, steam capacity: 700kg/h, water volume: 960l, operating pressure: 1bar, test pressure: 4.8bar. 4) Control cabinet Viessmann Vitocontrol HS. 5) Steam accumulator/pressure vessel Viessmann RBS/1 1000 So. steam, volume shell space/tube space: 990l/17l, max. operating overpressure shell space/tube space: 10bar/2.5bar, max. operating temperature shell space/tube space: 95°C/130°C, test pressure shell space/tube space: 13bar/4bar. Documentation available. An on-site inspection is possible. Hnodpfx Ahjx Uq Uue Neg

Condition: like new (used), engine power 18.5 kW Hnjdpfx Ahsx Uqubo Nsg hydraulic pressure drawer 15 mm screen year of manufacture 1994

Condition: refurbished (used), functionality: fully functional, The RS97 is one of the best wood chippers in the world. It has been fully refurbished and is equipped with a 160 kW engine. We can also supply a feeding conveyor for the material. All the technical data can be found in the attached data sheet. Hjdpfjxyqncex Ah Neng

Year of construction: 2026, condition: used, New: Yes Price: On request Maximum diameter: Hnjdpfx Ahoxayqas Nsg

Condition: used, axle configuration: 3 axles, first registration: 01/2009, loading space length: 13,600 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, total length: 13,900 mm, total width: 2,600 mm, total height: 4,000 mm, suspension: air, tire size: 385/65R22,5, wheelbase: 8,760 mm, color: other, Year of construction: 2009, Equipment: ABS, tail-lift, = Additional options and accessories = - EBS - Tail lift = Remarks = Number of axles: 3, Payload: 31,500 kg, Curb weight: 7,500 kg, Gross weight: 39,000 kg, Chassis type: Full chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Full air suspension, ABS, EBS, Body year: 2009, Sliding roof, Axle type: SAF, Tail lift, Tail lift type: fold-under, Tail lift capacity: 1,500 kg, Tail lift manufacturer: Dhollandia, Tail lift material: Steel and aluminum = Further information = General information Cab: Day cab Registration number: OK-73-SG Driveline Hnsdsx Scvxspfx Ah Neg Fuel type: Diesel Transmission Gearbox: Manual transmission Axle configuration Tyre size: 385/65R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Tyre tread left: 3 mm; Tyre tread right: 3 mm Axle 2: Tyre tread left: 8 mm; Tyre tread right: 5 mm Axle 3: Tyre tread left: 5 mm; Tyre tread right: 6 mm Weights Unladen weight: 7,500 kg Payload: 31,500 kg Gross vehicle weight: 39,000 kg Functional Tail lift: Dhollandia, fold-under platform, 1,500 kg Sliding roof: Yes Environmental Emission class: Euro 0 Condition General condition: moderate Technical condition: moderate Visual condition: moderate Damages: none = Company information = Kleyn Trucks is one of the world’s largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our range includes all European makes, model years, and price categories. Why buy at Kleyn Trucks? Simple! • Large, rapidly changing stock • Recognisable quality • Good pricing • Reliable business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates arranged quickly • Expert technical services • The security of 'recognisable quality' • And more… Please visit our website for special offers and a full inventory: Leasing via Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and submit an inquiry through our website. Ask directly about our European warranty package.

Condition: excellent (used), Year of construction: 2012, Used machine from business closure. GROSS shredder - Model GAZ 62 - Year of manufacture: 2012 - 18.5 kW Hnedox Tp U Ropfx Ah Njg - good condition - available immediately

Year of construction: 2003, condition: ready for operation (used), We offer this ready for use Cochran Wee Chieftan steam boiler, year of construction 2003. RATED STEAM OUTPUT 2500KG/HR Hnedpfox Tp Tajx Ah Nsg 11 BAR PRESSURE DIESEL BURNER NDT PASSED TO AUGUST 2029 BOILER SUITABLE FOR GAS - DUELFUEL DIESEL / GAS BURNER ALSO AVAILABLE SEPARATELY. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2022, operating hours: 26 h, functionality: fully functional, machine/vehicle number: 193-1036, MORBARK WH2400XP wood chipper from 2022 in good condition. Serial number 193-1036. Hnsdpex Tp Iqsfx Ah Nog

Condition: ready for operation (used), -packet-jointing line -for timber infeed 900-5.100 mm -double-roller conveyor -cut saw with marking recognition 15 KW -packaged -finger jointing milling automate 80 KW -singling cross conveyor -roller conveyor -cycle press hydraulic 20 KW -automatic under table circular saw 5 KW Hnjdpfxobqqzgj Ah Neg -wood widths of 70 - 255 mm -wood thickness from 22 to 140 mm -wood input from 900 to 5100 mm -pressing force 12 tons -capacity from 7.000 to 10.000 meters / 8 h -options example cycle press 25 to or 40 to

Year of construction: 2026, condition: used, New: Yes Empty weight: 131 kg Dimensions (LxBxH): 187 x 87 x 40 cm Price: On request Maximum diameter: Hodoxaypvspfx Ah Njng

Year of construction: 2009, condition: ready for operation (used), Additional Equipment Hjdpox R E Sgofx Ah Njng Second-hand shrink-foil packaging line Through-feed fully automatic shrink foil packing line: loading belt /wrapping station for 3 foil rollers /shrinking tunnel /outfeeding conveyor This ERREGI LINE ERREGI was manufactured in 2009. It features a fully automatic shrink-foil packaging line, including a loading belt, wrapping station for three foil rollers, shrinking tunnel, and an outfeeding conveyor. Consider the opportunity to buy this ERREGI LINE ERREGI woodworking machine. Contact us for more information. Application Types Other Woodworking Machinery

Condition: excellent (used), Year of construction: 2001, CATALOG NUMBER 7089 TECHNICAL DATA - Loading hopper opening: 1020x1230mm - Rotor working width: 1020mm - Rotor diameter: 348mm - Main motor: 22kW, 400V, 50Hz - Pump motor: 0.75kW - Number of knives: 50 pcs - Knife dimensions: 35x35x20mm - Screen: 12mm - Pusher drawer - Electric auto-reverse - Dimensions (L/W/H): 2000x1130x1530mm - Weight: 970kg ADVANTAGES – Auto-reverse – Like WEIMA WL 10 – German made – Pusher drawer – Very good condition – Used shredder, DTR+CE documentation Net price: 105900 PLN Hnedpfxsx R Dxls Ah Nsg Net price: 25200 EUR depending on the 4.2 EUR rate (Prices may change with larger fluctuations)

Condition: good (used), Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Outer: Ø 180 mm -Height: 35 mm -Radius -Socket: Ø 30 mm -Weight: 5.6 kg Hjdpfxjciv Tbo Ah Nong

Condition: used, Year of construction: 2022, operating hours: 420 h, functionality: fully functional, machine/vehicle number: 196 1040, MORBARK WH3000XP chipper from 2022 in good condition. Serial number 196 1040. Hedpfx Ajx Tp Hyoh Nong

Condition: excellent (used), Heating boiler Buderus SE 735 -1400Kw. on request with oil or gas burner. Please request Hnsdpfx Ahsirzt Ts Njg

Year of construction: 2025, condition: new, Professional Grinding Table for Wood and Metal A filtration device that works well in any environment where grinding operations take place. THE TABLE IS EQUIPPED WITH 2 FANS ON THE RIGHT AND LEFT SIDES. The table features an independent dual filtration system, ensuring the air is thoroughly cleaned of all contaminants! A special high-efficiency radial fan guarantees long operation without the need for frequent replacement of filtration materials. The eleven-segment worktable makes it easier to position the workpiece and clean the filters. Quick and easy filter replacement. Ventilation system located at the bottom and the side of the table. Hjdpfxjvugxwo Ah Njng Separation of "large" and "small" grinding waste. Heat-resistant filter (not fireproof). Spacious metal drawer on the right and left sides of the table. High vacuum (dust filtration efficiency > 99.9%). Technical Parameters: Worktop dimensions: 2060 x 530 mm Motor power: 2 x 1 kW Airflow capacity: 2 x 4000 m³/h Filter dimensions: 493 x 395 x 20 mm Voltage: 230V Overall dimensions: 2160 x 600 x 870 mm Weight: 120 kg Note: The price quoted is the net price. It does not include transportation costs.

Year of construction: 2004, condition: ready for operation (used), General Data Machine weight 6000 kg Main Drive Number of axis 3 Spindle Speed 6000 RPM This 3-axis Colombo AM33/AF CNC Wood Machining Centre was manufactured in 2004. It features two tenoning spindles at 6000 rpm and two profiling spindles, enhancing its versatility. The machine includes an electronic fence, height, and feed speed adjustments, and comes with tooling for various window profiles. Consider the opportunity to buy this Colombo AM33/AF CNC Wood Machining Centre. Contact us for more information about this machine. Hsdpex R E Injfx Ah Neng Application Types CNC Wood Machining

Condition: excellent (used), CATALOGUE NUMBER 7026 TECHNICAL DATA - Infeed width: 740mm - Infeed height: 300mm - Shaft width: 780mm Hedpfex R Dxfex Ah Njng - Shaft diameter: 1000mm - Knife length: 780mm - Number of knives: 2 pcs - Screen dimensions: 55x55mm - Bottom: 4 toothed feed rollers - Lower shaft motor: 5.5kW - Top: 3 toothed feed rollers - Upper shaft motor: 5.5kW - Belt conveyor feeder - Length of belt feeder: 4300mm - Width of belt feeder: 600mm - Feeder belt drive motor: 2.2kW - Main motor: 90kW - Reverse - Autoreverse - Overall machine dimensions (L/W/H): 4600x2350x1700mm - Overall feeder dimensions (L/W/H): 4550x980x970mm - Total weight: approx. 11,000kg – German-made – Autoreverse (adjustable) – Used shredder, in very good condition Net price: 265,900 PLN Net price: 63,300 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of major currency fluctuations, the price may change)

Condition: good (used), Wood router bit, router head, router tool, wood router bit, profile router bit -Manufacturer: Leitz, milling head -Type: Dufix, 126012079 TT 303-2 802G 176 E23 -Outer milling cutter: Ø 180 mm -Height: 47 mm -Hole: Ø 60 mm -Bolt circle: Ø 75 x 7 mm -Number: 2x milling cutters available -Price: per piece Hnsdpfxogfwfzj Ah Nog -Weight: 2.5 kg/pc.

Condition: new, Year of construction: 2025, Professional Table for Sanding Wood and Metal. A filtration device that is suitable for use wherever sanding operations are performed. RADIANT FAN, HIGHER VACUUM PRESSURE. Our equipment is installed in carpentry workshops, furniture workshops, and industrial paint shops. Designed for sanding wood and metal. The table is equipped with an independent dual filtration system, ensuring precise air purification from all contaminants! A special high-efficiency radial fan guarantees long operation without the need to change the filtration materials. The five-segment work table makes it easier to position workpieces and clean the filters. Quick and easy filter replacement. The table is equipped with pins and clamps for mounting workpieces. Ventilation system at the bottom and on the side of the table. Filter resistant to high temperatures, but not fireproof. Segregation of "large" and "small" sanding waste. Spacious metal drawer. High vacuum pressure (dust filtration efficiency > 99.9%). Technical Specifications: Work surface dimensions: 1000 x 550 mm Working height: 850 mm Airflow capacity: 4000 m³/h Filter size: 2 x (395 x 495 x 24 mm) Motor power (S1): 1.0 kW Hjdpev R Tihsfx Ah Nsng Voltage: 230V Weight: 70 kg Dimensions: 1050 x 600 x 850 mm

Condition: good (used), Wood milling cutter inserts, knife inserts, form milling cutter inserts -Knife width: 39 mm Hnedpfxsb A Suce Ah Njg -Knife thickness: 2 mm -Radius: 15 mm -Price: complete -Weight: 0.9 kg

Condition: new, Year of construction: 2025, PROFESSIONAL 8 TONS OF WOOD SPLITTER. The solid structure and high-quality wedge guarantee long life and trouble-free operation. The machine is designed for splitting wood up to with a diameter of approx. 450 mm! Its stable, solid construction ensures excellent results. The log splitter is equipped with a hydraulic cylinder with automatic return piston. Device description Device equipped with side tables to facilitate feeding of material for splitting. Fail-safe and powerful motor for 400V power supply. The log splitter ensures safe operation in accordance with EU standards, among others thanks to the double handle. The angled wedge helps the wedge sink into the material. Adjustable bayonet allows you to set the return of the wedge to any height. Hnedpfx Ahjwymwce Nsg LIFETIME WARRANTY ON THE HYDRAULIC PUMP! Technical parameters Engine 3 kW (4.1 HP) / 400 V Pressure 8 T Wood length range 250 - 520 mm Wood diameter range 80 - 450 mm Feed rate of the wedge 0.025 - 0.04 m / s Wedge return speed 0,15 m / s Maximum hydraulic pressure 265 BAR Capacity of the hydraulic tank 3.3l External dimensions 1070 x 800 x 1500 mm Weight 98 kg

Condition: good (used), Wood router bit, router head, router tool, wood router bit, profile router bit -AKE wood router bit with: AKE Hydro-Grip -Outer diameter: 165 mm -Height: 60 mm -Hole: Ø 40 mm -Cutter: 1 Hsdpjcazr Ajfx Ah Neng -Price/Sale: complete -Weight: 8 kg

Condition: good (used), Wood router bit, router head, router tool, wood router bit, profile router bit Hnodpfx Ahsgfwfwj Nsg -Manufacturer: Leitz, milling head -Type: Dufix, 126015788 TT 301-2 802F E23 -Outer milling cutter: Ø 185 mm -Height: 26 mm -Hole: Ø 40 mm -Bolt circle: Ø 58 x 7 mm -Weight: 1.6 kg

Condition: good (used), Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Outer: Ø 160 mm -Height: 45 mm -Radius -Support: Ø mm -Weight: 5.6 kg Hnsdpsciv Tcsfx Ah Nsg