Used Wittmann Robot for sale (70)

Condition: excellent (used), Year of construction: 2013, Equipment: documentation/manual, Wittmann W828 Z=2500 mm linear robot , payload 5kg Euromap 67 X= 1105 mm Dkedpey Nkf Ajfx Albot Y= 1200 mm Z= 2500 mm C is added in this price Gimatic brand Vacuum : 2 Number of axis: 3 Reach: 2500 mm Payload: 5 kg

Condition: used, Year of construction: 2011, Gyárto: Wittmann tip: W702 Dksdpfx Aovyhqxelbst Gyártási év: 2011 A berendezés teljesen működőképes, megtekinthető és kipróbálható! programozó kezelő nélkül !!

Condition: excellent (used), Year of construction: 2019, Wittmann Battenfeld EcoPower 110/350 / All-Electric Machine / Operating hours: approx. 15,000 in automatic mode Year of manufacture: 2019 Injection Unit: Screw diameter: 35 mm Shot weight: 153.8 g Injection pressure: 2083 bar Dosage volume: 168 cc Clamping Unit: Clamping force: 110 t Tie bar spacing: 470 x 420 mm Platen size: 682 x 682 mm Ejector: electric Clamping unit: toggle lever Control system: UNILOG B8 - Touchscreen Additional features: Machine in excellent technical condition All-electric machine: energy-efficient and very quiet Operating hours: approx. 15,000 in automatic mode Total operating hours: 21,800 Dedezy Ilrepfx Albjkt Euromap 67 Robot interface Air valve x 1 Hydraulic core pull x 1 Hot runner control system Injection unit is wear-resistant and corrosion-resistant Central lubrication Dimensions: Weight: 4,800 kg Length/Width/Height: 4.91 x 1.42 x 2.10 m All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: used, Year of construction: 2014, Wittmann Battenfeld HM 150/750 Servo Power / Hybrid Machine / Operating hours: approx. 29,000 in automatic mode Year of manufacture: 2014 Injection unit: Screw diameter: 50 mm Injection weight: 402.2 g Injection pressure: 1,714 bar Shot volume: 442 ccm Clamping unit: Clamping force: 150 t Tie bar distance: 520x470 mm Dimensions of platens: 760x755 mm Ejector: hydraulic Clamping unit: hydraulic Control system: UNILOG B6P - touchscreen Additional equipment: Machine in very good technical condition Electric machine: energy-saving and very quiet Operating hours: approx. 29,000 in automatic mode Total operating hours: 36,714 Euromap 67 Robot interface Air valve x 1 Dkedpfx Ajzy Ilfolbot Hydraulic core pull x 1 Injection unit is wear-resistant and corrosion-resistant Main drive motor - servo motor driven by inverter - energy saving Dimensions: Weight: 6,600 kg Length/Width/Height: 4.82x1.42x2.20 m All machines offered are started up by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2015, Wittmann Battenfeld VM 150/525 R1280 Servo Power / Vertical Injection Moulding Machine with Rotary Table Dodpfx Aljzy Ikzobskt Year of manufacture: 2015 Injection Unit: Screw diameter: 35 mm Shot weight: 175.6 g Injection pressure: 2743 bar Dosage volume: 193 ccm Clamping Unit: Clamping force: 150 t Tie bar distance: 0x0 mm Platen size: 1280 mm Ejector: hydraulic Clamping unit: hydraulic Control system: UNILOG B6 Additional equipment: Vertical injection moulding machine with rotary table Hybrid machine: high-speed, energy-saving, and very quiet Air valve x 5 Hydraulic core pull x 1 Hot runner control x 12 Injection unit is wear-resistant and corrosion-resistant Rotary table diameter: 1500 mm Rotary table driven by a servomotor, controlled by an inverter Dimensions: Weight: 11,300 kg Length/Width/Height: 3.83x1.50x4.07 m All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: used, Year of construction: 2023, machine/vehicle number: 142597-100, overall weight: 3,000 kg, This Wittmann Battenfeld injection molding machine, type: SmartPower 60/210 Unilog B8, will be auctioned off online in our industrial auction / machine auction due to the business closure of Blochwitz Formenbau & Kunststofftechnik – including CNC machining centers, injection molding machines, machine vices, tool holders, and much more. Dksdpfxjzy H Irs Albot You can find this and many other items on our platform.

Condition: used, Year of construction: 2015, machine/vehicle number: 136666-100, overall weight: 4,600 kg, This Wittmann Battenfeld injection molding machine, type: SmartPower 120/525 Unilog B6P, will be auctioned online as part of our industrial auction / machine auction – business liquidation of Blochwitz Formenbau & Kunststofftechnik – including CNC machining centers, injection molding machines, machine vises, tool holders, and much more. You will find this and many other items on our platform. Dkodpfx Aozy H Edjlbot

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, overall weight: 50 kg, type of input current: three-phase, power: 12 kW (16.32 HP), year of last overhaul: 2026, Type: TP-DIRECT: 120 Dkjdpfoy Uvwbex Albet Power: 12 kW Maximum operating temperature: 120 °C Medium: Water Temperature control unit Three units available Price: 700 EUR per unit 10% discount when purchasing three units!!!

Condition: excellent (used), Year of construction: 2014, Model: Wittmann Tempro TP+D-S-2:160 Type: Dual-zone pressurized water temperature control unit Max temperature: 160 °C Heating power: approx. 9 kW per zone (up to 12–16 kW optional) Pump: Magnetically coupled, 40–60 l/min, up to 4.5–6 bar Medium: Water (pressurized system) Cooling: Plate heat exchanger, cooling water G 3/8″ Mould connections: G 3/4″ Voltage: 3 × 400 V / 50 Hz Control accuracy: ±0.2 °C Zones: 2 independent circuits Features: Automatic filling, pressure monitoring, leak-free pump, mold purging, SSR heater control Options included: SO-C safety package + S-PLUS D 160 performance upgrade Dimensions: approx. 880 × 550 × 1000 mm Dkjdpfxezw D Nus Albjt Weight: approx. 95–120 kg

Year of construction: 2000, condition: good (used), Wittmann Teachbox Tested , fully functional Dedpfxozw D Epe Albekt

Year of construction: 2005, condition: new, Wittmann TP-PRIMUS C:90 Tempering Unit (2x) (2005) Dsdpozw D Anjfx Albskt

Year of construction: 2012, condition: excellent (used), Years: 1x 2012 1x 2011 1x 2010 1x 2006 Djdjzw Dz Rjpfx Albjkt 2x 2008 (Is possible to buy 6 pieces)

Condition: excellent (used), Year of construction: 2010, Model: Wittmann Tempro TP+D-S-2:160 Type: Dual-zone pressurized water temperature control unit Max temperature: 160 °C Dedszw Drvjpfx Albekt Heating power: approx. 9 kW per zone (up to 12–16 kW optional) Pump: Magnetically coupled, 40–60 l/min, up to 4.5–6 bar Medium: Water (pressurized system) Cooling: Plate heat exchanger, cooling water G 3/8″ Mould connections: G 3/4″ Voltage: 3 × 400 V / 50 Hz Control accuracy: ±0.2 °C Zones: 2 independent circuits Features: Automatic filling, pressure monitoring, leak-free pump, mold purging, SSR heater control Options included: SO-C safety package + S-PLUS D 160 performance upgrade Dimensions: approx. 880 × 550 × 1000 mm Weight: approx. 95–120 kg

Condition: excellent (used), Year of construction: 2009, clamping force: 3,000 kN, screw diameter: 65 mm, clearance between the columns: 710 mm, injection pressure: 2,070 bar, injection weight: 981 g, mold height (min.): 225 mm, Clamping Unit • Clamping force: 3000 kN (300 t) • Distance between columns: 710 x 710 mm – special design, increased distance compared to the standard version • Mold height: min. 225 mm / max. 1125 mm • Opening stroke: 900 mm • Maximum distance between mounting plates: 1125 mm • Mounting plate size: 1030 x 1020 mm (920 mm) • Special hole pattern in the clamping plate and nozzle plate – made to order • Manual device for removing the upper column, with a removable cover in the front guard and a wrench for the column nut Injection Unit • Injection unit 2250 • Screw diameter: 65 mm, L/D ratio 22.0 • Shot volume: 1078 cm3 • Maximum injection weight (PS): 981 g • Specific injection pressure: 2070 bar • Equipment package: wear and corrosion-resistant plasticizing unit, adapted for processing PP and PPSU, diameter 65 mm • Hart-PVC package: without internal screw cooling, with external cylinder cooling instead of standard design • High-temperature heating bands for a working temperature of 450 °C • 8 standard open nozzles, plus: 4 for the PVC cylinder and 4 for the PP cylinder, through holes 4, 8, 10, and 12 mm • Wrench for screw tip for a 65 mm diameter UNILOG B6S Control System - Upgrade package • Controller with increased computing power • APS and cycle time analysis • Four freely configurable network connections • Userpage and notepad • Real-value graphics with 16 curves • Event log depth: 10,000 events • Quality table memory depth: 10,000 events • Four envelope curves, foil function keys • SPC evaluation and trend charts • Injection, holding, and back pressure controlled by a servo valve Dksdpfx Alozxfg Robjt Hydraulics and Hydraulic Cores • Core movement and parallel ejection are performed by an additional DFEE pump, size 71, flow rate 95 l/min • 4 x hydraulic core for the clamping plate NW 10 (on/off valve), interfaces according to EUROMAP 13, with active ejector plate protection • Cores mounted on the upper side of the clamping plates, each with connections for two consumers • 2 x core junction box in a special design: 25 3-pole Amphenol plugs, mounted on the clamping plate on the operator side and the rear side, connected in series • 4 x core pressure relief upon emergency shutdown, engine stop, and after pressing the button in setting mode – relief occurs simultaneously for cores on the clamping side and the nozzle side • 4 x twin check valve for NW 10 core • 2 x pneumatic valve for controlling one closing nozzle in the mold or several in parallel (1000 l/min), mounted in the center console at the rear of the machine Mold Heating, Electrical System, and Connections • 12 x temperature control circuit for hot runner or mold heating, power 2.3 kW, 10 A, interface according to HASCO standard (1 x HASCO 24-pole for max. 6 zones) • Mounting location for heating circuits: center console at the rear, near the control cabinet • 2 x Schuko 16 A socket: under the control system and on the clamping side from the rear, under a cover • 2 x CEE 16 A socket: on the injection side from the front and on the clamping side • Dual power supply: 1. power supply 3P+N, 400 V, rated current 140 A, preliminary protection gL-gG 160 A • 2. power supply 3P, 400 V, rated current 98 A, preliminary protection gL-gG 100 A

Condition: excellent (used), Year of construction: 2004, Dryer Djdeumnknopfx Albskt Wittmann Drymax C30-30-P Year 2004 Conveyor units year 2005 2 pieces available

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 8Q00001264, For sale is a powerful and precise Wittmann linear robot W822-1264 for injection molding applications and automation tasks. The unit is packaged and secured on a Euro pallet and comes with the matching handheld device (teach pendant), emergency stop buttons, cabling, and the original technical documentation. The unit is in good condition and fully functional after disassembly. Technical data (according to the nameplate): Manufacturer: Wittmann Kunststoffgeräte GmbH (Vienna, Austria) Model / Type: W822-1264 Article number: 8Q00001264 Year of manufacture: 2015 Payload: 15 kg Dsdpfx Aszu Rzfslbekt Travel distances / stroke (X / Y / Z): X-axis (ejection stroke): 550 mm Y-axis (vertical stroke): 1200 mm Z-axis (lateral stroke / main axis): 2500 mm Supply voltage: 360V – 400V (50/60 Hz, 3PH/N/PE) Connected load: 1.9 kVA Weight: 275 kg Scope of supply & components: - Main unit / linear robot Wittmann W822-1264 - Pneumatic / gripper head with C-axis / swivel function and pneumatic valve blocks (SMC). - Including energy chains / drag chains for organized cable and hose routing. - Control system & operating unit - Original Wittmann Teachbox R8 / touch-screen handheld device with protective housing. - Additional handheld unit with emergency stop switch and function buttons. - External button boxes / control elements (including EMERGENCY STOP, quality control part, etc.). - Complete cabling, oil cooler control lines, Harting multi-pin connectors, and pneumatic hoses. - Original folder "Wittmann Technical Documentation" (including circuit diagrams, operating manual, and documentation). Upon request, transport and loading can be arranged for an additional fee, throughout Europe. Prices plus VAT. Inspection possible by appointment. Contact us, our team will be happy to assist you further. Trade-in or exchange possible! Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, visit our website.

Condition: used, A Wittmann temperature control unit is for sale Medium: water Heating capacity: 7 kW Dodpfx Alexx R Sxobskt Cooling capacity: 56 kW Operating temperature: max. 90°C

Condition: not inspected (used), Year of construction: 2014, Cooling capacity: 10.1 kW Flow rate: 5,000 L/h Weight: 180 kg Dkodpfoy Nif Isx Albot The unit is ready for immediate shipment and is available immediately!

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, 1,0 St. Trockenlufttrockener Hersteller: WITTMANN Typ: DRYMAX S3 Baujahr: 2007 Dsdpszt Amdofx Albjkt Trockenbehälter: 2 Stück Behälter je 75 Liter Inhalt Trockenlufttemperatur: max. 200° C

Condition: excellent (used), Year of construction: 2017, WITTMANN BATTENFELD Macro Power 900/8800 injection molding machine Year of manufacture: 2017 Serial number: 138337-100 Machine with Wittmann robot Clamping unit • Clamping force: 9,000 kN / 900 t Dkodjzvwirepfx Albjt • Opening force: 300 kN • Maximum opening stroke: 2,100 mm • Minimum mold height: 500 mm • Maximum mold height: 1,000 mm • Maximum distance between platens: 3,100 mm (with max. mold height of 1,000 mm) • Dimensions of mounting platens: 1,720 × 1,550 mm • Distance between columns: 1,200 × 1,000 mm • Ejector stroke: 300 mm • Ejector force: 165 kN Injection unit 8800 • Screw diameter: 105 mm • Screw pitch: 525 mm • L/D ratio: 22:1 • Theoretical injection volume: 4,545 cm³ • Maximum injection pressure: 1,931 bar • Maximum screw speed: 167 rpm • Maximum plasticizing rate: 151 g/s • Screw torque: 8,000 Nm • Maximum volumetric flow rate: 725 cm³/s • Injection flow rate with dual pump – option: 906 cm³/s • Nozzle stroke: 950 mm • Nozzle clamping force: 129 kN • Cylinder heating capacity: 53.9 kW • Number of cylinder heating zones: 7 Hydraulic system / drive • Pump power: 90 kW • Oil tank capacity: 1,100 l • Heating power: 53.9 kW Dimensions and weight • Machine length: 10,100 mm • Machine width: 3,400 mm • Machine height: 2,700 mm • Machine weight: 35,200 kg / 35.2 t

Condition: used, Year of construction: 2006, Wittmann robot W721-0575 year 2006 Dkjdpfszg U I Hox Albjt

Condition: like new (used), Year of construction: 2016, Wittmann Battenfeld Eco Power 110/130 Unilog B6P electric (2016) Dsdpfx Aju Eki Sslbskt Clamping force: 110 t Screw diameter: 22 mm Shot volume: 41 cm3 Screw L/D ratio: 20 Calculated stroke volume : 41,8 cm3 Correct injection pressure : 2,864 bar Max. screw speed : 500 min Screw tongue : 150 Nm Nozzle path contact force : 250/40 mm/kN Injection flow outside : 76 cm3/s Cylinder heating capacity : 6,3 kW Number of heating zones : 4 Working hours: 35.953 hours Type: Horizontal Drive: Electric

Condition: excellent (used), Year of construction: 2015, Number of axis: 3 X- 580 mm Y- 1000 mm Z- 1500 mm Reach: 1500 mm Payload: 3 kg Possible buy with rotary unit Gimatic OFN30-90SD or Dkjdpfey Ud Hdsx Albot rotary unit Gimatic RBT30

Condition: refurbished (used), Year of construction: 2010, Wittmann W853 Linear Z=4000mm , payload: 41,5 kg Number of axis: 3 X: 1500 mm Y: 2600 mm Z: 4000 mm \+ C axis pneumatic Reach: 4000 mm Djdpfx Aswnfmfelbekt Payload: 41 kg Robot has NEW CPU + batteries , fully tested by Wittmann technician in our showroom.

Year of construction: 2023, condition: like new (used), Wittmann TP-PLUS-D-2:M160 (2023) Model: Wittmann Tempro TP-PLUS-D-2:M160 Type: Dual-zone pressurized water temperature control unit Dodjxykn Nspfx Albekt Max temperature: 160 °C Heating power: approx. 9 kW per zone (option 12–16 kW) Pump: Magnetically coupled, 40–60 l/min, up to 4.5–6 bar Medium: Water (pressurized) Cooling: Plate heat exchanger, cooling water connection G 3/8″ Mould connections: G 3/4″ Voltage: 3 × 400 V / 50 Hz Control accuracy: ±0.2 °C Zones: 2 completely independent circuits Standard features: Automatic filling, pressure monitoring, leak-free pump, SSR heating, pump rotation control, mold purge Dimensions: approx. 880 × 550 × 1000 mm Weight: approx. 100–120 kg